STRUCTURE FORMATION OF COATED FILMS WITH DISPERSED PIGMENTS DURING DRYING

In the drying of coated films with dispersed pigments, such as floppy disks, the structure of the film is formed during the drying process and depends on the drying condition. It is important to understand the structure formation during drying for the design of the dryer and die better quality of the product. We measured die drying characteristics of the film and determined the structure of dried film experimentally. A qualitative model for the structure formation during drying of the coated film is suggested.     

One-Dimensional Continuous-Time Quantum Walks

We survey the equations of continuous-time quantum walks on simple one-dimensional lattices, which include the finite and infinite lines and the finite cycle, and compare them with the classical continuous-time Markov chains. The focus of our expository article is on analyzing these processes using the Laplace transform on the stochastic recurrences. The resulting time evolution equations, classical vs. quantum, are strikingly similar in form, although dissimilar in behavior. We also provide comparisons with analyses performed using spectral methods. PACS: 03.67.Lx     

EFFECT OF DRYING METHOD ON MESOPOROSITY OF RESORCINOL-FORMALDEHYDE DRYGEL AND CARBON GEL

Resorcinol-formaldehyde hydrogels were synthesized by sol-gel polycondensation of resorcinol with formaldehyde in a slightly basic aqueous solution. RF cryogels, RF xerogels, and RF xerogels (MW gels) were respectively prepared from RF hydrogels by freeze drying, hot air drying, and microwave drying. Carbon cryogels, carbon xerogels and carbon MW gels were subsequently obtained by pyrolyzing RF drygels in an inert atmosphere. Freeze drying and microwave drying were effective to prepare mesoporous RF drygels and carbon gels. RF cryogels and carbon cryogels showed high mesoporosity over wide ranges of the molar ratio of resorcinol to catalyst (R/C) and the ratio of resorcinol to water (R/W) used in sol-gel polycondensation. Although RF xerogels had a few mesopores, carbon xerogels had no mesopores. RF MW gels and carbon MW gels showed mesoporosity if appropriate values of R/C and R/W were selected.     

p-Chlorostyrene oligomers. Preparation,structure, and stereochemistry

The dimer and trimer obtained by the pyrolysis of poly(p-chlorostyrene) were 2,4-di(p-chlorophenyl)-1-butene and 2,4,6-tri(p-chlorophenyl)-1-hexene, respectively, while those obtained by the cationic oligomerization of p-chlorostyrene were trans-1,3-di(p-chlorophenyl)-1-butene and a diastereomeric pair of trans-1,3,5-tri-(p-chlorophenyl)-1-hexene.     

Single-step synthesis and characterization of single-walled carbon nanohorns hybridized with Pd nanoparticles using N2 gas-injected arc-in-water method

Single-walled carbon nanohorns (SWCNHs) hybridized with palladium (Pd) nanoparticles were synthesized by a single-step gas-injected arc-in-water method (GI-AIW) with a Pd wire inserted inside the anode hole. In the arc zone, carbon and Pd were vaporized simultaneously, leading to the formation of hybrid material of SWCNHs and Pd nanoparticles due to effective quenching. Based on TEM and CO chemisorption analyses, Pd nanoparticles were found to be embedded inside SWCNH aggregates. The size of Pd nanoparticles, determined by X-ray diffraction, was in the range of 3–6 nm when Pd wires with diameters of 0.1 and 0.3 mm were used. Using a Pd wire with a diameter larger than 0.5 mm results in larger Pd nanoparticles which tend to be exposed to the outer surface of the hybrid material. According to thermogravimetric analyses, the weight fraction of Pd nanoparticles is increased by increasing the Pd wire diameter although the yield of Pd nanoparticles decreased. SWCNHs hybridized with dispersed Pd nanoparticles, synthesized with 0.1 mm Pd wire, exhibited strong anti-oxidation resistance with a highly graphitic structure.     

Reduction of irreversible capacities of amorphous carbon materials for lithium ion battery anodes by Li2CO3 addition

Amorphous carbon materials for lithium ion battery anodes which contain a small amount of Li₂CO₃ were prepared by three methods. The obtained materials were characterized using X-ray diffraction (XRD) analysis, Raman spectroscopy and CO₂ adsorption experiments. Although the XRD profiles and Raman spectra of these materials were similar to those of carbon materials synthesized with no addition, the amount of CO₂ adsorbed was largely decreased by Li₂CO₃ addition. These results suggest that the micropores in these materials were plugged and/or filled with Li₂ CO₃. Galvanostatic lithium charging and discharging experiments showed that the irreversible capacity of the material can be significantly decreased by Li₂CO₃ addition, which is thought to be due to the plugging of the pore inlets by Li₂CO₃. Moreover, it was also found that the reversible capacities of the materials can be increased by adjusting both the amount of Li₂CO₃ addition and carbonization temperature.     

Environmental ecological modeling of human blood lead levels in East Asia

Environmental ecological modeling (EEM), which unifies models simulating transport of chemicals and exposure of humans to chemicals, was used to simulate long-term trends of female adult human blood lead levels (BLLs) and historical exposure to the atmospheric lead in four East Asian countries: Japan, Korea, China, and Vietnam. Anthropogenic lead emissions to the atmosphere in Vietnam were estimated from energy statistics to be 1931 t yr(-1). Calculated BLLs generally agreed with those observed in samples collected in these countries as the error factors were less than 2. The model results revealed that BLLs decreased significantly in Tokyo (by 58%) and Seoul (by 45%) in recent decades and confirmed the effects of efforts to reduce environmental lead in Japan and Korea. The model results also revealed that BLLs in Beijing did not decrease in this decade as much as in Tokyo and Seoul, despite the phasing out of leaded gasoline, and that the contribution from the atmospheric component was increasing (43% in 2009). Finally, we applied EEM to simulate BLLs of children in Hanoi. The probability of children having BLLs greater than 50 μg L(-1) was 7.5%, which was greater than those observed in developed countries.     

Changes in capacitance and dielectric dissipation factor of water‐treed XLPE with applied voltage

The capacitance C and dielectric dissipation factor tan δ of a water‐treed XLPE sheet sample have been measured under the application of 100 V or 1 kV at 60 Hz. The values of C and tan δ at 1 kV are much larger than those at 100 V. The value of tan δ gradually decreases with the length of exposure to a voltage of 1 kV. On the other hand, C is almost constant versus the exposure time. The results have been discussed on the basis of a model in which filling of channels interconnecting voids by water is taken into account. It has been found that the increase of C and tan δ is caused by the growth of the water‐filled channel region on the application of voltage. The gradual decrease in tan δ with the exposure time is explained by the change in the conductivity of the water‐filled channel region, as a result of which the relaxation time shifts to higher frequencies. © 2003 Wiley Periodicals, Inc. Electr Eng Jpn, 144(1): 12–20, 2003; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.10160