Preparation of a Near-Infrared Ray Absorption Film from N-Phenylthiocarbamoyl Chitosan Derivative

We recently observed that the decanoylation of N-phenylthiocarbamoyl chitosan (2) with a mixture of decanoic anhydride and pyridine at 60 °C for 24 h afforded N,N-(decanoyl)phenythiocarbamoyl-/2-isothiocynato chitosan decanoate (3b) rather than the expected product N,N-(decanoyl)phenylthiocarbamoyl chitosan decanoate (3a). This result suggested that some of the N,N-(decanoyl)phenylthiocarmbamoyl groups had been converted to isothiocyanate groups during the decanoylation process. The subsequent reaction of compound 3b with aniline gave N,N-(decanoyl)phenylthiocarbamoyl/N-phenylthiocarbamoyl chitosan decanoate (4) in high yield. A solution of compound 4 in CHCl₃ was then added to a solution of copper decanoate (5) in the same solvent, and the resulting mixture was cast onto a glass plate to give a cast film. The film was annealed at 200 °C in an oven to give a greenish film, which showed good near-infrared absorption characteristic in the range of 800–2200 nm.     

Distribution of carbon contamination in MgAl2O4 spinel occurring during spark-plasma-sintering (SPS) processing: I – Effect of heating rate and post-annealing

Carbon contamination from the carbon paper/dies during spark-plasma-sintering (SPS) processing was examined in the MgAl₂O₄ spinel. The carbon contamination sensitively changes with the heating rate during the SPS processing. At the high heating rate of 100 °C/min, the carbon contamination having organized structures occurred over almost the entire area from the surface to deep inside the SPSed spinel disk. In contrast, at the slow heating rate of 10 °C/min, the carbon contamination having disordered structures occurred only around the surface area. The carbon phases transform into high pressure CO/CO₂ gases by post-annealing in air and lead to pore formation along the grain junctions. The pore formation significantly occurs at the high heating rate due to the large amount of the contaminant carbon phases. This suggests that if once the carbon contamination was formed in the materials, it is very difficult to remove the carbon phases from the materials.     

Characterization of pigmented granules in minocycline-induced cutaneous pigmentation: observations using fluorescence microscopy and high-performance liquid chromatography

Ambiguous abdominal situs, asplenia/polysplenia and severe cardiac malformations characterize heterotaxy in humans. These anomalies result from the inability of the developing embryo to establish normal left-right asymmetry. We have studied an interesting family in which the heterotaxy phenotype segregates as an X-linked recessive trait. In order to map the heterotaxy locus (HTX), we have analysed 39 family members using highly-polymorphic microsatellite markers from the X chromosome. One of these markers, DXS994, shows no recombination with the disease locus in 20 informative meioses. Linkage analysis results in a maximum lod score of 6.37. Current genetic and physical mapping data assign the order of loci in Xq24-q27.1 as cen-DXS1001-(DXS994, HTX)-DXS984-tel. These results establish the first mapping assignment of situs abnormalities in humans.     

High performance liquid chromatographic separation of diacylglycerol acetates to quantitate disaturated species of lung phosphatidylcholine

A high-performance liquid chromatographic (HPLC) separation of diacylglycerol acetates to quantitatite disaturated species of lung phosphatidylcholine (PC) was studied. The diacylglycerol acetates were applied on a reversed phase column, eluted by an isocratic solvent, acetonitrile/isopropanol/water (35:15:1, v/v/v) at a flow rate of 1 ml/min, and detected by differential refractometry (RI). This isocratic HPLC method was useful to separate disaturated species from the others of lung PC. The quantitative analysis of the molecular species separated by HPLC was studied by RI detection. Chroamtograms obtained by RI detection and radioactivity determination of diacylglycerol [³H]acetates prepared by [³H]acetic anhydride were almost identical. The RI detector responsed in the same degree for different, authentic standards of diacylglycerol acetates. The detection limit with RI detection was about 30 nmoles. Molecular species of PCs from human lung and carcinoma tissues were analyzed by this HPLC method. The contents of disaturated species were very similar to those reported previously. These results indicate that RI detection is very useful in the nmole range for the quantitative analysis among the molecular species containing disaturated species.     

Effect of the addition of silver compounds during the pyrolysis of manganese nitrate on tantalum anodic oxide film

A study of the pyrolysis of an aqueous solution of manganese nitrate in the presence of silver compounds has been carried out. Thermal analysis showed that the MnO₂ formation temperature and the transformation temperature from MnO₂ to Mn₂O₃ shifted towards a lower temperature in the presence of silver acetate. A large particle-size and high crystallinity MnO₂ was formed; this may be a useful method of making an excellent tantalum capacitor with high capacitance.     

Preparation of polyimide-epoxy composites

The formation of a three dimensional network of crosslinked epoxy leads all unmodified epoxies to have inherent brittleness and relatively low degradation temperatures. Polyimides, on the other hand, are widely used for applications that require high degrees of flexibility and thermal resistance. Here, we have focused on the preparation of epoxy systems cured with polyamic acids instead of traditional amino-group-containing hardening agents. The cure behavior and potential reaction mechanisms of EPON 828 resin and polyamic acid mixtures were evaluated by DSC and TGA. Thermal analysis showed a complex reaction sequence taking place in the mixture and also determined the extent of reaction of the polyamic acid with itself and the competitive reaction of the polyamic acid with the epoxy. The compositions of the mixtures were varied to see the dependence of the cure behavior on component concentrations. Solutions of the two components did not phase separate and also phase separation was not apparent either optically or microscopically in the cured samples. This phase behavior was attributed to a unique in situ reaction. A novel solvent system for the polyamic acid precursor was also used.     

NH3／H2O2溶液腐蚀下多孔硅光致荧光

用光致荧光谱、傅里叶变换红外光谱（ＦＴＩＲ）和扫描电子显微镜（ＳＥＭ）对用阳极氧化法制成的多孔硅层在１％ＮＨ３／Ｈ２Ｏ２溶液中的腐蚀现象进行了研究。红外分析表明，Ｓｉ－Ｏ键和Ｈ－Ｏ键的强度随ＮＨ３／Ｈ２Ｏ２溶液的腐蚀时间的增加而增加，Ｓｉ－Ｈ键强主匠随腐蚀时间增加而减少。光致荧光谱的峰值在腐蚀开始时先下降后上升，半高宽变窄，谱峰的以边明显蓝移。分析研究表明，１％ＮＨ３／Ｈ２Ｏ２溶液对多孔硅层有腐蚀     

Fodrin is a constituent of the cortical lattice in outer hair cells of the guinea pig cochlea: immunocytochemical evidence

Localization of fodrin, a membrane skeletal protein, in the outer hair cell of the guinea pig cochlea was examined by immunocytochemical techniques. By immunofluorescence microscopy, fodrin was observed in the cuticular plate, in the infracuticular network and along the lateral wall. By immunoelectron microscopy of ultrathin cryosections, labeling for fodrin along the lateral wall was localized between the cell membrane and the outermost layer of the subsurface cisternae. Furthermore, pre-embedding immunoelectron microscopy of permeabilized specimens showed that most immunogolds for fodrin were on the thin cross-linking component of the cortical lattice. The results indicate that fodrin is a constituent of the cortical lattice which is thought to play an important role in outer hair cell motility.     

Multiple quasi-phase-matched device using continuous phase modulation of /spl chi//sup (2)/ grating and its application to variable wavelength conversion

We propose a new multiple quasi-phase-matched wavelength converter based on the continuous phase modulation of a /spl chi//sup (2)/ grating for use in variable wavelength conversion. A numerical study shows that the proposed device exhibits a high conversion efficiency, flexible design, and robust fabrication tolerance. A waveguide device fabricated by annealed proton exchange agrees well with the numerical design. Fine-tuning the device enabled us to demonstrate variable wavelength conversion between signals on the standard optical frequency grid. Using the device, we also demonstrated fast (<100 ps) wavelength switching of 4-channel 40-Gb/s signals. The obtained results clearly show that the proposed multiple quasi-phase-matched devices will be useful when constructing future flexible photonic networks.