Preparation and characterization of proton‐exchange hybrid membranes

Two types of composite were prepared, based on a thermoplastic polymer, polyvinylidene fluoride (PVDF), and an elastomer, ethylene‐propylene‐diene terpolymer (EPDM), respectively. We obtained both series by addition of an inorganic proton‐conducting antimonic acid derivative (HSb) and polystyrene crosslinked with a small percentage of divinylbenzene (PS‐co‐DVB). From these composites, membranes were obtained and subjected to a heterogeneous‐phase sulfonation reaction with chlorosulfonic acid. All experimental materials were characterized from a morphological and electrical point of view, by means of techniques such as differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), non‐isothermal crystallization and complex impedance analysis. Copyright © 2005 Society of Chemical Industry     

Fullerene Reactivity in an Oxygen Plasma

Fullerene reactivity in an oxygen plasma was measured and compared with those determined under the same conditions for a comprehensive set of 50 carbon materials. The possible reasons for the high plasma reactivity of the fullerene sample in an oxygen plasma are discussed.     

Synthesis and analgesic properties of new 5-thioaryl pyrazole derivatives

A new series 5-thio aryl pyrazole derivatives were proposed aiming analgesic activity. In this work, 8 new compounds of this class were synthesized using usual synthetic methodology, having as key intermediate the 3-methyl-4-nitro-5-chloropyrazole-1-phenyl derivative and subsequent reaction with several nucleophiles sulfides. Pharmacological evaluation of this series showed analgesic activity in the some extent in especially for 5-(4-bromophenyl)-thio-3-methyl-4-nitro-1-phenylpyrazole which was the most potent in this series, presenting an analgesic action comparable to that show by dipyrone.     

Passive internet-based crane teleoperation with haptic aids

Crane operation is a challenging task, due to the combined problem of obstacle avoidance and load swing suppression in underactuated conditions. This paper presents a human-machine interface that increases the operator’s perception of a gantry crane’s workspace. With this aim, a virtual environment resembling the workspace is connected with a haptic device. This allows the user to receive not only visual but also tactile feedback, thus increasing maneuvering safety. Additionally, this capability is integrated in a teleoperation setup, adopting a passivity-based control approach that guarantees overall stability. This includes also the design of controllers by means of the IDA-PBC method. Experimental results carried out with a laboratory crane show its feasibility for internet-based teleoperation and demonstrate the improvements on the system performance.     

Precision Oncology via NMR-Based Metabolomics: A Review on Breast Cancer

Precision oncology is an emerging approach in cancer care. It aims at selecting the optimal therapy for the right patient by considering each patient’s unique disease and individual health status. In the last years, it has become evident that breast cancer is an extremely heterogeneous disease, and therefore, patients need to be appropriately stratified to maximize survival and quality of life. Gene-expression tools have already positively assisted clinical decision making by estimating the risk of recurrence and the potential benefit from adjuvant chemotherapy. However, these approaches need refinement to further reduce the proportion of patients potentially exposed to unnecessary chemotherapy. Nuclear magnetic resonance (NMR) metabolomics has demonstrated to be an optimal approach for cancer research and has provided significant results in BC, in particular for prognostic and stratification purposes. In this review, we give an update on the status of NMR-based metabolomic studies for the biochemical characterization and stratification of breast cancer patients using different biospecimens (breast tissue, blood serum/plasma, and urine).     

High quality double wall carbon nanotubes with a defined diameter distribution by chemical vapor deposition from alcohol

We have synthesized double wall carbon nanotubes (DWNTs) with few defects and little amorphous carbon by hot wall chemical vapor deposition (CVD) of alcohol. Catalysts for the DWNT growth were made from cobalt and molybdenum acetates. Scanning electron microscopy, transmission electron microscopy, multi frequency resonance Raman spectroscopy and optical absorption spectroscopy were used for characterization of the product with regard to DWNT yield, the nanotube diameter distribution, defect concentration and amorphous carbon content. Base pressures lower than 1 × 10⁻⁵ mbar in the CVD reactor considerably suppress defects in the DWNTs. Optimized growth conditions for DWNT formation are presented.     

Standard goal programming with fuzzy hierarchies: a sequential approach

This paper proposes a pragmatic model for multi-objective decision-making processes involving clusters of objectives which have a decisional meaning for the decision maker (DM). We provide the DMs with a comfortable tool that allows them to express their preferences both by comparing criteria of the same cluster and via the comparison between the different clusters. In standard goal programming the importance of the goals is modeled by the introduction of preferential weights or/and the incorporation of pre-emptive priorities. However, in many cases the DM is not able to establish a precise preference structure. Even in the case of precise weights the solution does not match necessarily the relative weights or, in the case of precise pre-emptive priority, the result could be very restrictive. In order to overcome these drawbacks, in this paper the normalized unwanted deviations are interpreted in terms of achievement degrees of the goals and fuzzy relations are used to model the relative importance of the goals. Thus, we show how several methodologies from the fuzzy goal programming literature can be tailored for solving standard GP problems. We apply this new modeling to problems where there is a “natural” clustering between goals of the same class. We address this situation by solving two phases; in the first one each class is handled separately taking into account the hierarchy of their goals and, in the second phase, we integrate the results of the first phase and the imprecise hierarchy of the different classes. We formulate a new goal programming model called as sequential goal programming with fuzzy hierarchy model. Because many real situations involve decision making in this environment, our proposal can be a useful tool of broad application. A numerical example illustrates the methodology.     

Cell-protection mechanism through autophagy in HGFs/<Emphasis Type="Italic">S. mitis</Emphasis> co-culture treated with Chitlac-nAg

Silver-based products have been proven to be effective in retarding and preventing bacterial growth since ancient times. In the field of restorative dentistry, the use of silver ions/nanoparticles has been explored to counteract bacterial infections, as silver can destroy bacterial cell walls by reacting with membrane proteins. However, it is also cytotoxic towards eukaryotic cells, which are capable of internalizing nanoparticles. In this work, we investigated the biological effects of Chitlac-nAg, a colloidal system based on a modified chitosan (Chitlac), administered for 24–48?h to a co-culture of primary human gingival fibroblasts and Streptococcus mitis in the presence of saliva, developed to mimic the microenvironment of the oral cavity. We sought to determine its efficiency to combat oral hygiene-related diseases without affecting eukaryotic cells. Cytotoxicity, reactive oxygen species production, apoptosis induction, nanoparticles uptake, and lysosome and autophagosome metabolism were evaluated. In vitro results show that Chitlac-nAg does not exert cytotoxic effects on human gingival fibroblasts, which seem to survive through a homoeostasis mechanism involving autophagy. That suggests that the novel biomaterial Chitlac-nAg could be a promising tool in the field of dentistry.     

Multiple instance learning for classifying students in learning management systems

In this paper, a new approach based on multiple instance learning is proposed to predict student’s performance and to improve the obtained results using a classical single instance learning. Multiple instance learning provides a more suitable and optimized representation that is adapted to available information of each student and course eliminating the missing values that make difficult to find efficient solutions when traditional supervised learning is used. To check the efficiency of the new proposed representation, the most popular techniques of traditional supervised learning based on single instances are compared to those based on multiple instance learning. Computational experiments show that when the problem is regarded as a multiple instance one, performance is significantly better and the weaknesses of single-instance representation are overcome.