Manufacture of three-layer wood–porcelain stone composite board reinforced with bamboo fiber

The objective of this study was to improve bending strength properties of three-layer wood–porcelain stone composite board. The focus of this study was on the effects of orientations and weight ratios of bamboo fiber in face layer on physical and mechanical properties of the board. Three types of board with different orientation of bamboo fibers in the face layer were manufactured: one in which the fibers were oriented at random orientation (R board), another in which the fibers were oriented at unidirectional orientation (U board), and a third in which the fibers were oriented at cross orientation (C board). The physical and mechanical properties of the boards were evaluated based on the Japanese Industrial Standard for Particleboards. The main results obtained were as follows: Bending strength properties of the board were strongly affected by both orientation and weight ratio of bamboo fibers. Perpendicular specimen of C board has larger bending strength properties than U board and the value become larger with increased weight ratio of bamboo fibers. Internal bond strength value decreased with increasing weight ratio of bamboo fibers. The effect of orientation and weight ratios of bamboo fiber on thickness swelling of the board was not significant.     

Hepatitis B Virus-Like Particle: Targeted Delivery of Plasmid Expressing Short Hairpin RNA for Silencing the Bcl-2 Gene in Cervical Cancer Cells

Gene therapy research has advanced to clinical trials, but it is hampered by unstable nucleic acids packaged inside carriers and there is a lack of specificity towards targeted sites in the body. This study aims to address gene therapy limitations by encapsidating a plasmid synthesizing a short hairpin RNA (shRNA) that targets the anti-apoptotic Bcl-2 gene using truncated hepatitis B core antigen (tHBcAg) virus-like particle (VLP). A shRNA sequence targeting anti-apoptotic Bcl-2 was synthesized and cloned into the pSilencer 2.0-U6 vector. The recombinant plasmid, namely PshRNA, was encapsidated inside tHBcAg VLP and conjugated with folic acid (FA) to produce FA-tHBcAg-PshRNA VLP. Electron microscopy revealed that the FA-tHBcAg-PshRNA VLP has an icosahedral structure that is similar to the unmodified tHBcAg VLP. Delivery of FA-tHBcAg-PshRNA VLP into HeLa cells overexpressing the folate receptor significantly downregulated the expression of anti-apoptotic Bcl-2 at 48 and 72 h post-transfection. The 3-(4, 5-dimethylthiazol-2-yl)-2, 5-diphenyltetrazolium bromide (MTT) assay demonstrated that the cells’ viability was significantly reduced from 89.46% at 24 h to 64.52% and 60.63%, respectively, at 48 and 72 h post-transfection. As a conclusion, tHBcAg VLP can be used as a carrier for a receptor-mediated targeted delivery of a therapeutic plasmid encoding shRNA for gene silencing in cancer cells.     

SnO-SnO2 modified two-dimensional MXene Ti3C2Tx for acetone gas sensor working at room temperature

Acetone,as widely used reagents in industry and laboratories,are extremely harmful to the human.So the detection of acetone gas concentrations and leaks in special environments at room temperature is essential.Herein,the nanocomposite combining SnO-SnO2 (p-n junction) and Ti3C2Tx MXene was successfully synthesized by a one-step hydrothermal method.Because of the existence of a small amount of oxygen during the hydrothermal conditions,part of the p-type SnO was oxidized to n-type SnO2,forming in-situ p-n junctions on the surface of SnO.The hamburger-like SnO-SnO2/Ti3C2Tx sensor exhibited improved acetone gas sensing response of 12.1 (Rg/Ra) at room temperature,which were nearly 11 and 4 times higher than those of pristine Ti3C2Tx and pristine SnO-SnO2,respectively.Moreover,it expressed a short recovery time (9 s) and outstanding reproducibility.Because of the different work functions,the Schottky barrier was formed between the SnO and the Ti3C2Tx nanosheets,acting as a hole accumulation layer (HALs) between Ti3C2Tx and tin oxides.Herein,the sensing mechanism based on the formation of hetero-junctions and high conductivity of the metallic phase of Ti3C2Tx MXene in SnO-SnO2/Ti3C2Tx sensors was discussed in detail.     

Polydopamine as an intermediate layer for silver and hydroxyapatite immobilisation on metallic biomaterials surface

Hydroxyapatite (HA) coated implant is more susceptible to bacterial infection as the micro-structure surface which is beneficial for osseointegration, could also become a reservoir for bacterial colonisation. The aim of this study was to introduce the antibacterial effect of silver (Ag) to the biomineralised HA by utilising a polydopamine film as an intermediate layer for Ag and HA immobilisation. Sufficient catechol groups in polydopamine were required to bind chemically stainless steel 316 L, Ag and HA elements. Different amounts of Ag nanoparticles were metallised on the polydopamine grafted stainless steel by varying the immersion time in silver nitrate solution from 12 to 24 h. Another polydopamine layer was then formed on the metallised film, followed by surface biomineralisation in 1.5 Simulated Body Fluid (SBF) solution for 3 days. Several characterisation techniques including X-Ray Photoelectron Spectroscopy, Atomic Force Microscopy, Scanning Electron Microscopy and Contact Angle showed that Ag nanoparticles and HA agglomerations were successfully immobilised on the polydopamine film through an element reduction process. The Ag metallisation at 24 h has killed the viable bacteria with 97.88% of bactericidal ratio. The Ag was ionised up to 7 days which is crucial to prevent bacterial infection during the first stage of implant restoration. The aged functionalised films were considered stable due to less alteration of its chemical composition, surface roughness and wettability properties. The ability of the functionalised film to coat complex and micro scale metal make it suitable for dental and orthopaedic implants application.     

Absorption of lithium in montmorillonite: a density functional theory (DFT) study

The absorption of lithium in montmorillonite [LiSi8(Al3Mg)O20(OH)4] was investigated using Density Functional Theory (DFT). The final position of lithium after absorption was found to be in good agreement with an experimental observation where lithium atom migrated from the interlayer into the vacant octahedral site of montmorillonite. The lithium absorbed on montmorillonite was held together by a very strong attraction between ions and exhibited an insulating behavior as depicted from the density of states curve. Due to the presence of lithium in the octahedral site of montmorillonite, the OH group reoriented itself perpendicular to the ab plane and an electron of lithium was transferred in order to compensate the existing net charge of montmorillonite caused by isomorphous substitutions. Relative small charge transfer was observed between lithium and montmorillonite.     

A Study of Vacuum-Drying Characteristics of Sugi Boxed-Heart Timber

In this study, we evaluated the effects of drying under atmospheric and vacuum pressure on the drying time, checking, and color change of sugi boxed-heart timber dried at the same dry-bulb temperature and the same wet-bulb depression. The results obtained were as follows: Sugi boxed-heart timber specimens dried at any temperature under vacuum pressure had a shorter drying time than the specimens dried under atmospheric pressure. At moisture content above fiber saturation point and at the same dry-bulb temperature, the specimens dried under vacuum pressure had a drying rate that was almost twice as fast as that of the specimens dried under atmospheric pressure. Sugi boxed-heart timber specimens dried under both atmospheric and vacuum pressure at a higher drying temperature had a shorter drying time than the specimens dried at a lower drying temperature. Apart from the sugi boxed-heart timber specimen dried at a temperature of 100°C under atmospheric pressure, no surface checks were observed for the specimens dried under vacuum pressure or at the other temperatures dried under atmospheric pressure. Slight internal checks were observed in sugi boxed-heart timber specimens dried at a temperature of 100°C under both atmospheric and vacuum pressure. After planer shaving, there was no significant difference between kiln drying under atmospheric pressure and that done under vacuum pressure in terms of the color change (ΔE*) for both sapwood and heartwood of sugi boxed-heart timber specimens.     

Textile-based microfluidics: modulated wetting,mixing, sorting,and energy harvesting

Microfluidics technology allows us to perform rapid and massively parallel manipulation and characterization of fluid samples with biomedical and environmental importance. In the attempt to achieve resource-efficient fabrication and operation of the microfluidic devices, paper-based and thread-based microfluidics have been previously demonstrated by other researchers. We propose to develop textile-based microfluidics, formed by three-dimensional networks of individual threads, to further advance the ability of paper-based and thread-based microfluidics. This paper describes four different phenomena that we investigate in textile-based microfluidic systems: modulated wetting, liquid mixing, liquid sorting, and energy harvesting. Our results indicate the feasibility of textiles as a new platform to develop low-cost microfluidic technology.     

Effects of pH and temperature on inactivation of Salmonella typhimurium DT104 in liquid whole egg by pulsed electric fields

Pulsed electric field (PEF) exposes a fluid or semi-fluid product to short pulses of high-energy electricity, which can inactivate microorganisms. The efficacy of PEF treatment for pasteurisation of liquid eggs may be a function of processing temperature. In this study, effects of PEF, temperature, pH and PEF with mild heat (PEF + heat) on the inactivation of Salmonella typhimurium DT104 cells in liquid whole egg (LWE) were investigated. Cells of S. typhimurium were inoculated into LWE pH adjusted to 6.6, 7.2 or 8.2 at 15, 25, 30 and 40 °C. The PEF field strength, pulse duration and total treatment time were 25 kV cm⁻¹, 2.1 μs and 250 μs respectively. Cells of S. typhimurium in LWE at pH 7.2 were reduced by 2.1 logs at 40 °C and 1.8 logs at 30 °C. The PEF inactivation of S. typhimurium cells at 15 or 25 °C was pH dependent. Heat treatment at 55 °C for 3.5 min or PEF treatment at 20 °C resulted in c. 1-log reduction of S. typhimurium cells. Combination of PEF + 55 °C achieved 3-log reduction of S. typhimurium cells and was comparable to the inactivation by the heat treatment at 60 °C for 3.5 min. With further development, PEF + heat treatment may have an advantage over high-temperature treatment for pasteurisation of liquid eggs.     

Implementation of real-time positioning system using extended Kalman filter and artificial landmark on ceiling

Most localization algorithms use a range sensor or vision in a horizontal view, which usually imparts some disruption from a dynamic or static obstacle. By using landmarks on ceiling which the vehicle position were vertically measured, the disruption from horizontal view was reduced. We propose an indoor localization and navigation system based on an extended Kalman filter (EKF) and real-time vision system. A single upward facing digital camera was mounted on an autonomous vehicle as a vision sensor to recognize the landmarks. The landmarks consisted of multiple circles that were arranged in a defined pattern. Information on a landmark’s direction and its identity as a reference for an autonomous vehicle was produced by the circular arrangements. The pattern of the circles was detected using a robust image processing algorithm. To reduce the noise that came from uneven light, the process of noise reduction was separated into several regions of interest. The accumulative error caused by odometry sensors (i.e., encoders and a gyro) and the vehicle’s position were calculated and estimated, respectively, using the EKF algorithm. Both algorithms were tested on a vehicle in a real environment. The image processing method could precisely recognize the landmarks, and the EKF algorithm could accurately estimate the vehicle’s position. The experimental results confirmed that the proposed approaches are implementable.