Swords to plowshares: Shock wave applications to advanced lithography

xtreme ltra iolet ithography (EUVL) seeks to apply radiation in a wavelength region centered near 13 nm to produce microcircuits having feature sizes 0.1 micron or less. A critical requirement for the commercial application of this technology is the development of an economical, compact source of this radiation which is suitable for lithographic applications. A good candidate is a laser-plasma source, which is generated by the interaction of an intermediate intensity laser pulse (up to 10¹² W/cm²) with a metallic target. While such a source has radiative characteristics which satisfy the needs of an EUVL source, the debris generated during the laser-target interaction strikes at the economy of the source. Here, we review the use of concepts and computer modeling, originally developed for hypervelocity impact analysis, to study this problem.     

Bulk and suspension polymerization of styrene in the presence of n-pentane. An evaluation of monofunctional and bifunctional initiation

The plasticizing effect of n-pentane on the rate of bulk free radical polymerization of styrene and molecular weight distribution development has been modeled on the basis of the free volume theory for both monofunctional and bifunctional initiation. A strong decrease in the reaction rate in the late stages of the polymerization, due to the displacement of the onset of the gel effect, has been observed for both types of initiation. This decrease in the polymerization rate limited the terminal conversion to values well below 100% for mono-functional initiation. However, in bifunctionally initiated polymerization, terminal conversions close to 100% were obtained in spite of the decrease in reaction rate. Contrary to what was expected, the molecular weight distribution obtained at terminal conversion was almost completely insensitive to these changes in polymerization rate. This phenomenon is explained in terms of limited transfer to monomer reactions when n-pentane is present in the system. In suspension polymerization, the limiting conversion and plasticizing effects of n-pentane in monofunctionally initiated systems, caused enhanced coalescence leading to suspension set-up. In bifunctionally initiated systems this enhanced coalescence was completely overcome by the short duration of the particle growth stage, owing to high polymerization rates, and stable suspensions were achieved. For these systems the particle size distributions obtained were similar to that of suspension polystyrene without n-pentane. © 1993 John Wiley & Sons, Inc.     

Quality at time of purchase of dried milk products commercially packaged in reduced oxygen atmosphere

Nonfat dry milk (NDM) and powdered whey beverages are available at the retail level, packaged in No. 10 cans in a reduced oxygen atmosphere to prolong shelf life. The objective of this research was to determine the sensory and nutritional quality of these dried milk products at the time of purchase. In the 10 brands tested, wide variation existed in headspace oxygen, can seam quality, sensory quality, and vitamin A (with 6 of 10 brands entirely lacking the vitamin). Manufacturers of dried milk products packaged in cans for long-term storage need to give careful attention to can seam quality, product labeling, and vitamin fortification. Consumers would be well advised to evaluate several brands of dried milk products prior to large quantity purchases.     

Rapid thermal annealing effects on the photoluminescence properties of molecular beam epitaxy-grown GaIn(N)As quantum wells with Ga(N)As spacers and barriers

This article describes the effects of rapid thermal annealing (RTA) on the photoluminescence (PL) emission from a series of GaIn(N)As quantum wells. Indium compositions of both 20% and 32% were examined with nominal N compositions of 1% or 2%. The N location was varied within our quantum structure, which can be divided into three regions: (1) quantum well, (2) Ga(N)As spacer layers at the barrier-to-well interface and well-to-barrier interface, and (3) barriers surrounding each quantum well. Eight combinations of samples were examined with varying In content, Ga(N)As spacer layer thickness, N content, and N location in the structure. In the best cases, the presence of these Ga(N)As spacer layers improves the PL properties, due to annealing, with a reduction in the emission wavelength blueshift by ～400 Å, a reduction of the decrease in the full-width at half-maximum (FWHM) by ～5 meV, and a threefold reduction of the increase in integrated intensity. It was also observed that relocating N from the quantum wells to the barriers produces a comparable emission wavelength both before and after annealing. Our results further show that the composition of incorporated N in the material is most influential during the stages of RTA in which relatively small amounts of thermal energy is present from our lower annealing times and temperatures. Hence, we believe a low thermal-energy anneal is responsible for the recovery of the plasma-related crystal damage that was incurred during its growth. However, the In composition in the quantum well is most influential during the latter stages of thermal annealing, at increased times and temperatures, where the wavelength blueshift was roughly independent of the amount of incorporated N. As a result, our investigations into the effects of RTA on the PL properties support other reports that suggest the wavelength blueshift is not due to N diffusion.     

Rushton桨气液搅拌槽内气泡流对搅拌轴弯矩的影响（英文）

The bending moment acting on the overhung shaft of a gas-sparged vessel stirred by a Rushton turbine, as one of the results of fluid and structure interactions in stirred vessels, was measured using a moment sensor equipped with digital telemetry. An analysis of the shaft bending moment amplitude shows that the amplitude distribution of the bending moment, which indicates the elasticity nature of shaft material against bending deformation, fol-lows the Weibull distribution. The trends of amplitude mean, standard deviation and peak deviation character-istics manifest an“S”shape versus gas flow. The“S”trend of the relative mean bending moment over gas flow rate, depending on the flow regime in gas–liquid stirred vessels, resulted from the competition among the non-uniformity of bubbly flow around the impeller, the formation of gas cavities behind the blades, and the gas direct impact on the impel er when gas is introduced. A further analysis of the bending moment power spectral density shows that the rather low frequency and speed frequency are evident. The low-frequency contribution to bend-ing moment fluctuation peaks in the complete dispersion regime.     

Measurement of helium metastable atom densities in a plasma-based ambient ionization source

We describe direct imaging of the densities of helium metastable atoms in the afterglow of a helium dielectric-barrier discharge (He-DBD) using collisionally assisted laser-induced fluorescence (LIF). For the conditions tested, comparison of fluorescence images of a He-DBD with analogous maps of emission from highly excited helium atoms revealed that helium metastable atom densities did not correlate well with emission from the plasma. Fluorescence images also showed that helium metastable atom densities increased substantially when a glass slide was placed 10.0 mm from the discharge capillary in a geometry typical for desorption-ionization experiments. We also studied the effect hydrogen has on the helium metastable atom densities. The hydrogen severely quenched the metastable state leaving it virtually undetectable. Emission was quenched as well, but to a lesser extent. The addition of 1% H(2) to the helium in the source provided nearly a factor of 2 improvement in the sensitivity of the signal for coumarin 47 when the plasma was used to ionize the dye under ambient conditions, despite the quenching of the helium metastable atom population.     

US business and the energy crisis

The results of a survey carried out among executives of large American corporations in an effort to gauge the reaction of businessmen both to the changed energy situation and measures taken by the US government.     

Application of scaling techniques to the evaluation of counseling outcomes.

A reasonably comprehensive review of the literature has revealed largely inadequate attempts to evaluate counseling, due chiefly to improper criterion development. A consolidation of various criterion issues reveals that multiple criteria and some combination of the other types of criteria discussed are most promising for application in research. A consolidation of scaling issues emphasizes multiple ratings, the closing gap between physical and psychological continua, and the improper use of theoretical definitions for criterion development. A review of rating scales covering the last 20 yr. reveals a general implementation of relevant criterion issues, but little attention to relevant scaling issues. It is concluded that each phase of rating scale development demands proper scaling techniques, i.e., factor analysis, and multidimensional scaling analysis. Other scaling methods are discussed, and item construction and analysis are developed briefly. (2 p. ref.) (PsycINFO Database Record (c) 2010 APA, all rights reserved)