Ultrafast trace-level detection of methyl nicotinate biomarker using TiO2/SiNWs nanocomposite-based sensing platform

Journal of Materials Science: Materials in Electronics - The reported work presents an ultrafast and ultrasensitive sensing platform for the precise and reliable trace-level detection of Methyl...     

Field emission of MWCNTs/PANi nanocomposites prepared by ex‐situ and in‐situ polymerization methods

The present work describes the field‐emission properties of multiwalled carbon nanotubes (MWCNTs) coated with conducting polymer polyaniline (PANi). MWCNTs/PANi nanocomposites have been prepared by ex‐ situ polymerization methods and inex‐ situ chemical polymerization and are analyzed by SEM and Raman spectroscopy. It is fairly clear from SEM images that PANi is coated on the surface of MWCNT. SEM image of PANi powder also shows that the powder obtained is PANi nanofibers. It is also observed from SEM images that the shell diameter of MWCNTs depends on PANi content in thenanocomposites. The average outer diameter of MWCNTs increases from 7–15 to 50–80 nm upon PANi coating. Field‐emission study shows that although there is decrease in the value of turnex‐on field E_to and increase in the value field enhancement factor β of the nanocomposites as we go from direct solid‐state mixing method to inex‐ situ chemical polymerization method, the parameters obtained by inex‐ situ polymerization chemical method shows superior field emission. The turn‐on field of the nanocomposites are between 2.5 and 4.5 V/μm and the field enhancement factors are significantly high, between 1.2 × 10³ and 9.2 × 10³ while. PANi nanofibers does not show any field emission. POLYM. COMPOS. 34:1298–1305, 2013. © 2013 Society of Plastics Engineers     

Field emission study of carbon nanotubes forest and array grown on Si using Fe as catalyst deposited by electro-chemical method

Vertically aligned carbon nanotubes are synthesized by Low Pressure Chemical Vapor Deposition (LPCVD) on Si substrate coated with Fe as a catalyst at a pressure of 20 Torr and at a growth temperature of 600 degrees C. The catalyst film is prepared by electro-chemical method which is very unique and a low cost method. Three precursor gases Acetylene (C2H2), Ammonia (NH3) and Hydrogen (H2) at the flow rate of 20 sccm, 100 sccm and 100 sccm respectively are allowed to flow through the Low Pressure Chemical Vapor Deposition reactor for 10 minutes. Scanning Electron Microscope (SEM) images show that synthesized CNTs are vertically aligned and uniformly distributed with a high density. Raman analysis shows G-band at 1574 cm(-1) and D-band at 1370 cm(-1). The G-band is higher than D-band, which indicates that CNTs are highly graphitized. The field emission measurement reveals good field emission properties of as-grown vertically aligned carbon nanotubes with turn-on field of 1.91 V/microm at the current density 10 mA/cm2. The field enhancement factor is calculated to be 7.82 x 10(3) for as-grown carbon nanotubes.