Unified Systolic-Like Architecture for DCT and DST Using Distributed Arithmetic

A common computing-core representation of the discrete cosine transform and discrete sine transform is derived and a reduced-complexity algorithm is developed for computation of the proposed computing-core. A parallel architecture based on the principle of distributed arithmetic is designed further for the computation of these transforms using the common-core algorithm. The proposed scheme not only leads to a systolic-like regular and modular hardware for computing these transforms, but also offers significant improvement in area-time efficiency over the existing structures. The structure proposed here is devoid of complicated input/output mapping and does not involve any complex control. Unlike the convolution-based structures, it does not restrict the transform length to be a prime or multiple of prime and can be utilized as a reusable core for cost-effective, memory-efficient, high-throughput implementation of either of these transforms     

Fast computation of multidimensional discrete Hartley transform

Efficient algorithms for the fast computation of 2D and 3D discrete Hartley transforms have been proposed. It is shown that the proposed algorithms offer a significant saving in computation over the existing methods for various array sizes.<>     

Synthesis of Biodiesel from Canola Oil Using Heterogeneous Base Catalyst

A series of alkali metal (Li, Na, K) promoted alkali earth oxides (CaO, BaO, MgO), as well as K₂CO₃ supported on alumina (Al₂O₃), were prepared and used as catalysts for transesterification of canola oil with methanol. Four catalysts such as K₂CO₃/Al₂O₃ and alkali metal (Li, Na, K) promoted BaO were effective for transesterification with >85 wt% of methyl esters. ICP-MS analysis revealed that leaching of barium in ester phase was too high (~1,000 ppm) when BaO based catalysts were used. As barium is highly toxic, these catalysts were not used further for transesterification of canola oil. Optimization of reaction conditions such as molar ratio of alcohol to oil (6:1–12:1), reaction temperature (40–60 °C) and catalyst loading (1–3 wt%) was performed for most efficient and environmentally friendly K₂CO₃/Al₂O₃ catalyst to maximize ester yield using response surface methodology (RSM). The RSM suggested that a molar ratio of alcohol to oil 11.48:1, a reaction temperature of 60 °C, and catalyst loading 3.16 wt% were optimum for the production of ester from canola oil. The predicted value of ester yield was 96.3 wt% in 2 h, which was in agreement with the experimental results within 1.28%.     

Extreme learning machine and bayesian optimization-driven intelligent framework for IoMT cyber-attack detection

The Journal of Supercomputing - The Internet of Medical Things (IoMT) is a bionetwork of allied medical devices, sensors, wearable biosensor devices, etc. It is gradually reforming the healthcare...     

Efficient bit-parallel multipliers over finite fields GF(2)

Hardware implementation of multiplication in finite field GF(2^m) based on sparse polynomials is found to be advantageous in terms of space-complexity as well as the time-complexity. In this paper, we present a new permutation method to construct the irreducible like-trinomials of the form (x + 1)^m + (x + 1)ⁿ + 1 for the implementation of efficient bit-parallel multipliers. For implementing the multiplications based on such polynomials, we have defined a like-polynomial basis (LPB) as an alternative to the original polynomial basis of GF(2^m). We have shown further that the modular arithmetic for the binary field based on like-trinomials is equivalent to the arithmetic for the field based on trinomials. In order to design multipliers for composite fields, we have found another permutation polynomial to convert irreducible polynomials into like-trinomials of the forms (x² + x + 1)^m + (x² + x + 1)ⁿ + 1, (x² + x)^m + (x² + x)ⁿ + 1 and (x⁴ + x + 1)^m + (x⁴ + x + 1)ⁿ + 1. The proposed bit-parallel multiplier over GF(2^4m) is found to offer a saving of about 33% multiplications and 42.8% additions over the corresponding existing architectures.     

Experimental realization of quantum cheque using a five-qubit quantum computer

Quantum cheques could be a forgery-free way to make transaction in a quantum networked banking system with perfect security against any no-signalling adversary. Here, we demonstrate the implementation of quantum cheque, proposed by Moulick and Panigrahi (Quantum Inf Process 15:2475–2486, 2016), using the five-qubit IBM quantum computer. Appropriate single qubit, CNOT and Fredkin gates are used in an optimized configuration. The accuracy of implementation is checked and verified through quantum state tomography by comparing results from the theoretical and experimental density matrices.     

Electron microscopic observations on the alterations of tegumental surface of Raillietina echinobothrida treated with root-peel extract of Potentilla fulgens

Potentilla fulgens, a member of the family Rosaceae, has been known since ancient times in Northeast India for its antiparasitic, antitumour and antidiabetic properties. The crude ethanolic extract of the plant was assayed against Raillietina echinobothrida, the intestinal cestode parasite of domestic fowl to authenticate the putative anthelmintic efficacy and cestocidal potential in particular of the plant. Treatment of the worm in-vitro with 25, 50 and 100 mg of crude extract per ml of phosphate buffered saline caused paralysis leading to death taking 4.02-4.20, 3.05-3.75 and 2.05-2.83 h respectively. Scanning electron microscopic observations on treated worms revealed deformation of surface architecture, particularly in scolex and surface microtriches. Severe distortion and disorganization of the tegumental and subtegumental layer along with cytoplasmic organelle was also observed under transmission electron microscope. The possible use of the plant as a potential anthelmintic against cestode parasite is discussed.     

Surface integrity study of WEDM with various wire electrodes: experiments and analysis

Abstract

Wire electrical discharge machining (WEDM) is always significant for its high-precision machining. However, due to the generation of high discharge energy during machining, machined surfaces are often got distorted. These might be upgraded by choosing the correct tool with proper machining condition. The effects of the electrode materials and process parameters on different responses of WEDM like average surface roughness, recast layer thickness, and surface morphology are systematically examined here to enhance the knowledge of WEDM and its correlation with electrode property. The experiments have been carried out on one of the expensive steel namely Maraging steel 300 due to its applicability in tooling and aerospace industries. Plain brass wire, zinc-coated brass wire (ZCB), and silver-coated brass (SCB) wires are used as a tool electrode for analysis. Comparative experimental studies prove that among BW, ZCB, and SCB, the overall performance of SCB is commendable owing to the high-quality surface considering control parameters in low discharge energy level. However, the second-best performance is shown by ZCB.     

Energy reduction schemes for multiple effect evaporator systems

In the present work different energy reduction schemes (ERSs), used to reduce the consumption of steam for a multiple effect evaporator (MEE) system, are developed. These ERSs are condensate-, feed- and product-flashing and vapor bleeding. Further, a new scheme is proposed where condensate of vapor chest of an effect is used to preheat the liquor, which is entering into that effect using a counter current heat exchanger. This work also presents a comparative study between existing ERSs and selects the best ERS amongst these based on steam consumption as well as number of units involved. Further, in the present paper a simple graphical approach named “modified temperature path (MTP)” is developed for the analysis of different feed flow sequences of a MEE system to screen best possible feed flow sequence. To study the effect of different ERSs on steam consumption and MTP analysis an example of septuple effect flat falling film evaporator (SEFFFE) system, employed for concentrating weak black liquor in an Indian Kraft Paper Mill, is considered. The results show that ERSs reduce the steam consumption up to 24.6%.