Feasibility study of the application of voltage contrast to printed circuit board

Voltage contrast (VC) has been a powerful tool for the failure analysis of integrated circuits and multichip module. As the packing density of printed circuit board (PCB) is increasing, conventional failure analysis methods to detect open or short circuit in PCBs are no longer adequate, and voltage contrast method could be a method for this purpose. However, unlike the cases of integrated circuits and multichip module, there are many areas in PCB that will produce serious charging effect when examine under the scanning electron microscope. One of the areas is the presence of solder mask on PCB.This work examines the feasibility of using voltage contrast for PCB failure analysis. Specially designed PCB is used for experimentation, and it is found that positive bias on one track and zero bias on another copper track provide a better image contrast as compared to negative and zero biases on the tracks. Also, the variation of the image contrast with different spacing between inter copper tracks has studied. It is found that the variation depends on the presence of solder mask and its location. The variation can be very different for negative bias case as compared to the positive bias case.Finite element analysis is also performed to explain the experimental observations. All the observations can be well explained by the charging effect of the solder masks. The charging effect of solder mask is indeed very significant in affecting the image contrast, and it could reduce the contrast to almost zero in some cases.     

Energy-based robust controller design for flexible spacecraft

This paper presents a class of non-model2based position controllers for a kind of flexible spacecraft. With the controllers, one can achieve not only the closed-loop stability of the original distributed parameter system, but also the asymptotic stability of the truncated system, which is obtained through representing the deflection of the appendage by an arbitrary finite number of flexible modes. The system dynamics are not explicitly involved in the controller design and stability proof. Instead, only a very basic system energy rehtionship of the flexible spacecraft is utilized. The controllers possess several remarkable advantages over the traditional model-based ones. Numerical simulations are carried out on a kind of spacecraft with one flexible appendage and satisfactory results are obtained.     

Molecular design of nanohybrid gas separation membranes for optimal CO2 separation

Organic-inorganic materials comprising CO₂-philic components may yield superior CO₂ transport properties and good CO₂/H₂ gas selectivity. We report that a fine balance in size heterogeneity in the silicon-based structures is essential and a mixture of sizes up to 50 nm surrounded by 5–15 nm silicon-based nanostructures is the preferred inorganic phase morphology that yields optimal nanohybrid membranes. The combination of optimal synthesis conditions i.e. water/silicon ratio, condensation and ozone pre-treatment durations yields a nanohybrid membrane with a CO₂ permeability of 2000 Barrer while achieving a CO₂/H₂ selectivity of 11. The findings of this work are important for the design of gas separation membranes using green materials.     

Strategies for the construction sector in the information technology era

The construction industries in many countries are starting to consider seriously the strategic use of information technology (IT). The use of information technology in construction is extending beyond the stage of piecemeal application for improving the efficiency of discrete operations by individual organizations to the advanced stage where IT is applied strategically in commercial enterprises, government agencies and professional institutions. Progress in construction in this regard appears to lag behind that in most other sectors of the economy. This paper considers the nature and the background of this progression in construction by examining proposals by Earl (1989) of nine basic prerequisites to the IT era which make a strategic approach timely. Each prerequisite is outlined and how it has been met in other sectors of the economy considered. The extent to which these prerequisites apply in construction and the scope for their application in the near future are examined. It is argued that all organizations involved in construction will ultimately have to think strategically about their use of IT, and how some are already doing so is described.

In discussing the factors which hinder the strategic application of IT in construction, the nature of the design and construction processes and initiatives that may be necessary to overcome the perceived problems are examined in detail. The strategies that are evolving at a national level in Singapore are outlined.     

Fisher公式在对参数阵微商中的应用

使用Ｆｉｓｈｅｒ公式，得到了因子分析模型和重复测量模型中有关对矩阵微商的公式．     

Electromigration in width transition copper interconnect

Electromigration (EM) experiments are conducted for submicron dual damascene copper interconnects with width transition. The direction of electron flow (from narrow-to-wide segment and wide-to-narrow segment) and the ratio of lengths (e.g. ratio of narrow-to-wide segment lengths) are found to be significant factors in determining the life-time of such interconnects. About 69% shorter EM life-time is obtained for the case of electron flow from narrow-to-wide segment, and thus to avoid over estimation of EM life-time of such interconnect system, the direction of the electron flow should be chosen appropriately in the reliability assessment. On the other hand, it is found that the width transition location is not the failure site, and finite element model is presented to explain the experimental findings.     

Plasma etching optimization of oxide/nitride/oxide interpolydielectric breakdown time in flash memory devices

The breakdown time of flash memory oxide/nitride/oxide (ONO) layer t_bd under positive constant current stressing has been found to be closely related to the cumulative extent of (over)etch of the tungsten silicide, control polysilicon, and ONO layers, i.e., Σ(ΛOE). An empirical first-order relation between t_bd and Σ(ΛOE) has been derived to facilitate the plasma etch recipe optimization. This has led to a four-fold increase in the average t_bd across a 200-mm wafer to 208 s. More importantly, the spread in t_bd has been tightened to ~5%, which is down from ~54%     

Dimensional analyses and surface quality of pulsed UV laser micro-machining of STAVAX stainless steel mold inserts

Laser micro-machining is a new, precise, and very flexible process in micro-mold manufacturing, especially for difficult to machine material, i.e., hardened steel. The aim of the work reported in this paper was to utilize response surface methodology to optimize the dimensional accuracy and surface finish for STAVAX stainless steel mold inserts in the pulsed UV laser micro-machining. The influence of laser machining parameters on the ablated depth and surface roughness of the machined mold inserts have been experimentally investigated. The parameters of insert quality are analyzed under varying laser power, pulse frequency, hatched spacing, scan rate, and number of passes. The settings of the laser micro-machining parameters are determined by using design of experiments method. The analysis of variance, and regression analyses are employed to find the optimal levels and to analyze the effect of the parameters on the depth accuracy values and surface finish. Confirmation experiments with the optimal levels of micro-machining parameters are carried out in order to illustrate the effectiveness of the multi-optimization method. The validity of regression approach to process optimization is well established.     

Low frequency epithelial cells in bone marrow aspirates from prostate carcinoma patients are cytogenetically aberrant

BACKGROUND: Low frequency epithelial cells occur in bone marrow aspirates of 25-50% of patients with locally confined prostate carcinoma. It is assumed that bone marrow epithelial cells derive from the primary tumor; however, it has not been established unequivocally that they are tumor cells. Immunofluorescence approaches were used to quantify the frequency of epithelial cells in bone marrow aspirates from prostate carcinoma patients and genotypic analyses were used to determine whether they contained numeric aberrations of chromosomes 1, 7, and 8. METHODS: Epithelial cells in bone marrow aspirates collected after radical prostatectomy were visualized using fluorescence microscopy and fluorophore-linked antibodies against cytokeratin 8,18 (CK) and prostate specific antigen (PSA). Antibodies specific for proliferating nuclear cell antigen (PCNA) were used to evaluate the cycling status of discriminated cells. Copies of chromosomes 1, 7, and 8 in the discriminated epithelial cells were quantified using fluorescence in situ hybridization. RESULTS: CK+ cells were present in bone marrow aspirates from 30 of 66 patients (approximately 45%) at a median frequency of 1.4 CK+ cells/10(5) mononuclear cells. Few CK+ epithelial cells in the bone marrow aspirates coexpressed PSA and none of the CK+ cells expressed PCNA. Approximately 70-75% of the CK+ cells contained 7 and 8 aneusomies. Gains of chromosome 1 occurred in 42% of the CK+ cells. CONCLUSIONS: The majority of CK+ cells in bone marrow aspirates collected after surgery are cytogenetically aberrant, which is consistent with a primary tumor origin. The prevalence and frequency of CK+ cells is independent of tumor stage/grade and androgen treatment.