Finite-difference time-domain simulation of scattering from objectsin continuous random media

A three-dimensional (3D) finite-difference time-domain (FDTD) scheme is introduced to model the scattering from objects in continuous random media. FDTD techniques have been previously applied to scattering from random rough surfaces and randomly placed objects in a homogeneous background, but little has been done to simulate continuous random media with embedded objects where volumetric scattering effects are important. In this work, Monte Carlo analysis is used in conjunction with FDTD to study the scattering from perfectly electrically conducting (PEC) objects embedded in continuous random media. The random medium models under consideration are chosen to be inhomogeneous soils with a spatially fluctuating random permittivities and prescribed correlation functions. The ability of frequency averaging techniques to discriminate objects in this scenarion is also briefly investigated. The simulation scheme described in this work can be adapted and used to help in interpreting the scattered field data from targets in random environments such as geophysical media, biological media, or atmospheric turbulence     

Ozonation of CI Reactive Black 5 using rotating packed bed and stirred tank reactor

This study investigates the ozonation of CI Reactive Black 5 (RB5) by using the rotating packed bed (RPB) and completely stirred tank reactor (CSTR) as ozone contactors. The RPB, which provides high gravitational force by adjusting the rotational speed, was employed as a novel ozone contactor. The same ozone dosage was separately introduced into either the RPB or the CSTR for the investigation, while the experimental solution was continuously circulated within the apparatus consisting of the RPB and CSTR. The decolorization and mineralization efficiencies of RB5 in the course of ozonation are compared for these two methods. Moreover, the dissolved and off‐gas ozone concentrations were simultaneously monitored for the further analysis. As a result, the ozone mass transfer rate per unit volume of the RPB was significantly higher because of its higher mass transfer coefficient and gas–liquid concentration driving force. Furthermore, ozonation kinetics was found to be independent of the gravitational magnitude of an ozone gas–liquid contactor. Therefore, the results suggest employing RPBs as ozone‐contacting devices with the advantage of volume reduction. The experimental results, which can be used for further modeling of the ozonation process in the RPB, also show the requirement of correct design for the RPB. Consequently, the present study is useful for the understanding of practical application of RPBs. Copyright © 2004 Society of Chemical Industry     

Static and free vibration analysis of variable-depth bridges of arbitrary alignments using the isoparametric spline finite strip method

The isoparametric spline finite strips for shells are employed to solve static and free vibration problems of variable-depth bridges of arbitrary alignments. Using this approach, a continuous bridge is first split up into substructures. Each substructure is modelled as an assemblage of isoparametric spline finite strips. Compatibility between substructures is ensured by suitable transformation at the interface. The presence of support diaphragms and bearings can also be accounted for. This method retains the computational efficiency of the spline finite strip method while it is much more flexible in geometric modelling. Solutions of this method are compared with other available solutions, and good agreement is observed.     

Synthesis and characterization of novel copolymers with the trimethylsilyl group for deep‐UV photoresists

N‐(4‐Acetoxyphenyl) maleimide (APMI) and three kinds of comonomers bearing a trimethylsilyl group were copolymerized at 60°C in the presence of azobisisobutyronitrile (AIBN) as an initiator in 1,4‐dioxane to obtain the three IP, IIP, and IIIP copolymers. These copolymers were removed from the acetoxy group in a transesterification process into new IVP, VP, and VIP copolymers with a pendant hydroxyl group. Two modified processes were adopted to prepare photoresists using these copolymers. The first process involved mixing the dissolution inhibitor, o‐nitrobenzyl cholate, with the new copolymers. Second, o‐nitrobenzyl cholate was introduced into the copolymers using 1,8‐diazabicyclo[5.4.0]undec‐7‐ene (DBU) in dimethylformamide (DMF). The cyclic maleimide structure is responsible for the high thermal stability of these copolymers. After irradiation using deep–UV light and development with aqueous Na₂CO₃ (0.01 wt %), the developed patterns showed positive images and exhibited good adhesion to the silicon wafer without using any adhesion promoter. The resolution of these resists was at least 0.8 μm and an oxygen‐plasma etching rate was 1/5.3 to that of hard‐baked HPR‐204. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 2791–2798, 2002; DOI 10.1002/app.10255     

Effect of grain boundary phase on the thermal conductivity of aluminium nitride ceramics

AIN with high thermal conductivity was fabricated by pressureless sintering with Y₂O₃ as the sintering aid. The thermal conductivity was observed to increase with sintering time (up to 8 h) at 1810 °C. The distribution of the sintering aid was identified as one of the major factors influencing the thermal conductivity in AIN. Non-uniform distribution of the grain boundary phase was found to be associated with a significant amount of porosity, resulting in the enhancement of phonon scattering and thereby lowering the thermal conductivity.     

Synthesis and characterization of a novel proton‐exchange membrane for fuel cells operating at high temperatures and low humidities

The synthesis of a p‐toluidine/formaldehyde (PTF) resin was performed, and the effects of the molar ratio of the individual monomers and the polymerization conditions on the structure of the PTF resin were studied. Fourier transform infrared and ¹³C‐NMR spectra were used to characterize the PTF. Wide‐angle X‐ray diffraction patterns revealed the crystalline structures of various PTFs. Polarized optical microscopy revealed that the molar ratio of the monomers had a strong effect on the crystalline morphologies. A longer polymerization time turned out a polymer with a higher intrinsic viscosity and molecular weight, which led to differences in the proton conductivity. All of the PTFs showed a higher proton conductivity than a commercial Nafion membrane at 90–100°C and 0% relative humidity. The proton conductivity of the PTF series could be improved by sulfonation with sulfuric acid and could be maintained after blending with polyurethane. Pure methanol could be used as a fuel source because of the insolubility and nonwetting properties of PTF in methanol to increase the output current density for a PTF membrane electrode assembly. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

Two-dimensional phase unwrapping using a minimum spanning treealgorithm

Phase unwrapping refers to the determination of phase from modulo 2pi data, some of which may not be reliable. In 2D, this is equivalent to confining the support of the phase function to one or more arbitrarily shaped regions. A phase unwrapping algorithm is presented which works for 2D data known only within a set of nonconnected regions with possibly nonconvex boundaries. The algorithm includes the following steps: segmentation to identify connectivity, phase unwrapping within each segment using a Taylor series expansion, phase unwrapping between disconnected segments along an optimum path, and filling of phase information voids. The optimum path for intersegment unwrapping is determined by a minimum spanning tree algorithm. Although the algorithm is applicable to any 2D data, the main application addressed is magnetic resonance imaging (MRI) where phase maps are useful.     

Quantitative studies on the movement of fluid and lymphocytes through periodontal tissue and into the draining lymph.

Chronic lymph drainage techniques in sheep have been used to map the pathways and to quantify the fluid and cell traffic through periodontal tissues. The continuous collection of cervical and prescapular lymph has demonstrated that 65% of labelled protein tracer injected into the periodontal tissues could be found in lymph over a period of 7.5 hours. Nearly 90% of the total radioactivity could be accounted for between the lymph and the tissue site. When silk was impregnated with radiolabelled albumin and a tooth ligated, the kinetics of the subsequent appearance of the tracer in lymph emphasized the ease with which macromolecules surrounding the teeth gain access to the lymphatics, regional lymph nodes, and immune apparatus. Animals were primed with BCG and then tuberculin (delayed hypersensitivity) lesions were simultaneously induced in the skin, bowel, and periodontium. When T cells were labelled with radioisotopes and their migration from blood to lymph measured, the periodontal tissue traffic pattern was distinct from the traffic pattern through DTH in the skin and also distinct from the pattern through the small intestine. This indicates that the lymphocyte traffic through the inflamed periodontium has unique features. This tissue specificity was not apparent when lesions were induced with TNFalpha. The static assessment of lymphocyte subsets within the tissues was also assessed with immunohistochemistry.