Enhanced thermal stability of a sputtered titanium-nitride film as a diffusion barrier for capacitor-bottom electrodes

The effect of a thin RuO_x layer formed on the Ru/TiN/doped poly-Si/Si stack structure was compared with that on the RuO_x/TiN/doped poly-Si/Si stack structure over the post-deposition annealing temperature ranges of 450–600°C. The Ru/TiN/poly-Si/Si contact system exhibited linear behavior at forward bias with a small increase in the total resistance up to 600°C. The RuO_x/TiN/poly-Si/Si contact system exhibited nonlinear characteristics under forward bias at 450°C, which is attributed to no formation of a thin RuO_x layer at the RuO_x surface and porous-amorphous microstructure. In the former case, the addition of oxygen at the surface layer of the Ru film by pre-annealing leads to the formation of a thin RuO_x layer and chemically strong Ru-O bonds. This results from the retardation of oxygen diffusion caused by the discontinuity of diffusion paths. In particular, the RuO_x layer in a nonstoichiometric state is changed to the RuO₂-crystalline phase in a stoichiometric state after post-deposition annealing; this phase can act as an oxygen-capture layer. Therefore, it appears that the electrical properties of the Ru/TiN/poly-Si/Si contact system are better than those of the RuO_x/TiN/poly-Si/Si contact system.     

Boundary element analysis of thermal stress intensity factors for interface griffith and cusp cracks

The thermal stress intensity factors for interface cracks of Griffith and symmetric lip cusp types under vertical uniform heat flow in a finite body are calculated by the boundary element method. The boundary conditions on the crack surfaces are insulated or fixed to constant temperature. The relationship between the stress intensity factors and the displacements on the nodal point of a crack-tip element is derived. The numerical values of the thermal stress intensity factors for an interface Griffith crack in an infinite body are compared with the previous solutions. The thermal stress intensity factors for a symmetric lip cusp interface crack in a finite body are calculated with respect to various effective crack lengths, configuration parameters, material property ratios and the thermal boundary conditions on the crack surfaces. Under the same outer boundary conditions, there are no appreciable differences in the distribution of thermal stress intensity factors with respect to each material property. However, the effect of crack surface thermal boundary conditions on the thermal stress intensity factors is considerable.     

A WDM-PON Employing Fabry–PÉrot Laser Diodes Without a Seed Light Injection

We propose and demonstrate a wavelength-division-multiplexed passive optical network by employing double-contact Fabry-Perot laser diodes (F-P LDs) without a seed light injection. To avoid the high mode partition noise at low frequency, we use a binary phase-shift keying as a modulation format at a low relative intensity noise window. An error-free transmission is achieved by compensating a lasing envelope shift due to temperature variation with the double-contact F-P LD.     

A priori ordering protocols to support consensus-building in multiple stakeholder contexts

In a complex social, political, economic, technological, and/or environmental context, corporate, military, government, and other organizations are often faced with collective decision-making situations. The rationale for group decision exercises is that the judgment of many will usually prove superior to the judgment of one. However, it has been shown that collective decision exercises are often highly dependent on matters of perspective, values and opinion, all of which - being essentially subjective in nature - are beyond the reach of existing formal decision technology. Furthermore, it can be expected that many collective decision exercises - particularly those of strategic import - will not lend themselves to the quantitative analysis instruments that have long dominated the management and decision science repertoire. This does not, however, mean that they must remain entirely and forever outside the bounds of scientific rationality. The ordering protocols which are currently available do not have enough technical mechanics to be relied upon to bring us to any satisfying resolution of a priori disputation. Hence, we propose an a priori ordering reference model that might support consensus-building in a multiple stakeholders context. In order to detect whether the subjective arguments are products of proper reasons or merely instances of raw rhetoric and to suggest how any logical or syntactical flaws might best be repaired, we propose logical ordering facilities and protocols for integrating procedural and instrumental provisions for a group-decision process with two lines of technical innovation: the superimpositional ordering function and the logical ordering support facilities.     

Perioperative specific management of blood volume loss in craniosynostosis surgery

Accurate assessment and replacement of blood loss and fluid-electrolyte deficit during craniosynostosis repair is difficult owing to patient size and the diversity of surgical technique. Forty-three patients undergoing primary craniosynostosis repair over a 10-year period were studied retrospectively to determine blood loss and fluid deficit and to assess blood transfusion practices during both intraoperative and postoperative periods. Blood loss was calculated on the basis of estimated red cell mass (ERCM) and fluid-electrolyte imbalance was investigated with blood samplings. Blood transfusion was considered appropriate if the postoperative or posttransfusion ERCM was within 12% of the preoperative value. Estimated fluid requirement (EFR) was used in 4 ml kg(-1) h(-1) except for neonates. Intraoperatively, 80% of all patients were appropriately managed with respect to blood transfusion and EFR. Postoperatively only 20% of the patients receiving transfusions were transfused appropriately. In 23.3% of these patients (10/43) unexpected respiratory distress developed immediately after their recovery from the anesthesia. With the measurement of estimated blood volume and allowable blood loss, appropriate transfusion could be achieved for the successful treatment of the primary craniosynostosis.     

基于LSTM的阀冷系统入水温度及冷却裕度预测

为解决换流站阀冷系统状态缺乏智能预测手段和极端工况下冷却能力是否充裕难以评估的问题,提出基于长短期记忆网络(long short-term memory, LSTM)的换流阀冷却裕度预测方法。在阀冷系统冷却裕度指标量化评估的基础上,考虑多源影响因素,通过相关性强弱选择特征量并构建数据样本集,利用长短时记忆网络建立预测模型,并基于大量实际样本数据进行训练,对入水温度和冷却裕度发展趋势做出预测、提前预警,同时提供极端工况下冷却裕度的分析模型,为现场处理决策提供依据。通过穗东换流站的实例分析,验证了算法的有效性和可行性。