Measurement of Electrophysiological Signals In Vitro Using High-Performance Organic Electrochemical Transistors

Biological environments use ions in charge transport for information transmission. The properties of mixed electronic and ionic conductivity in organic materials make them ideal candidates to transduce physiological information into electronically processable signals. A device proven to be highly successful in measuring such information is the organic electrochemical transistor (OECT). Previous electrophysiological measurements performed using OECTs show superior signal-to-noise ratios than electrodes at low frequencies. Subsequent development has significantly improved critical performance parameters such as transconductance and response time. Here, interdigitated-electrode OECTs are fabricated on flexible substrates, with one such state-of-the-art device achieving a peak transconductance of 139 mS with a 138 µs response time. The devices are implemented into an array with interconnects suitable for micro-electrocorticographic application and eight architecture variations are compared. The two best-performing arrays are subject to the full electrophysiological spectrum using prerecorded signals. With frequency filtering, kHz-scale frequencies with 10 µV-scale voltages are resolved. This is supported by a novel quantification of the noise, which compares the gate voltage input and drain current output. These results demonstrate that high-performance OECTs can resolve the full electrophysiological spectrum and suggest that superior signal-to-noise ratios could be achieved in high frequency measurements of multiunit activity.     

Macrophage Immunomodulation Through New Polymers that Recapitulate Functional Effects of Itaconate as a Power House of Innate Immunity

Itaconate (ITA) is an emerging powerhouse of innate immunity with therapeutic potential that is limited in its ability to be administered in a soluble form. A library of polyester materials that incorporate ITA into polymer backbones resulting in materials with inherent immunoregulatory behavior is developed. Harnessing hydrolytic degradation release from polyester backbones, ITA polymers result in the mechanism specific immunoregulatory properties on macrophage polarization in vitro. In a functional assay, the polymer-released ITA inhibits bacterial growth on acetate. Translation to an in vivo model of biomaterial associated inflammation, intraperitoneal injection of ITA polymers demonstrate a rapid resolution of inflammation in comparison to a control polymer silicone, demonstrating the value of sustained biomimetic presentation of ITA.     

Social Support and Social Strain Among Husbands and Wives: A Multilevel Analysis.

In response to recent calls in the literature for within-person examinations of social support processes over time, this study explores the relationships of spousal support, spousal strain, and well-being among husbands and wives, both within the same day and across days. Eighty-three couples were interviewed and completed a structured diary twice daily for 1 week. The results of multilevel hierarchical modeling suggest that both spousal support and spousal strain made significant, independent contributions to concurrent negative affect, although only spousal support was a significant predictor of next-day negative affect. Spousal strain interacted with spousal support to predict next-day negative affect. Direct and moderating effects of perceived marital adjustment on negative affect were discussed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Normal-incidence InAs self-assembled quantum-dot infrared photodetectors with a high detectivity

An InAs/AlGaAs quantum-dot infrared photodetector based on bound-to-bound intraband transitions in undoped InAs quantum dots is reported. AlGaAs blocking layers were employed to achieve low dark current. The photoresponse peaked at 6.2 /spl mu/m. At 77 K and -0.7 V bias, the responsivity was 14 mA/W and the detectivity, D*, was 10/sup 10/ cm/spl middot/Hz/sup 1/2//W.     

Scarring trachoma is associated with polymorphism in the tumor necrosis factor alpha (TNF-alpha) gene promoter and with elevated TNF-alpha levels in tear fluid

Tumor necrosis factor alpha (TNF-alpha) may play a central role in the disease pathogenesis which occurs as a consequence of chlamydial infection. To investigate the importance of TNF-alpha gene promoter polymorphisms and TNF-alpha levels in tear fluid in scarring trachoma, a large matched-pair case-control study was performed in The Gambia. The -308A allele was present in a higher proportion of patients (28.4%) than controls (18.4%), with an increasing association for homozygotes (chi2 for trend, P = 0.032; allele frequency, 0.163 in patients and 0.099 in controls; chi2, P = 0.025). For the -238A allele, the association was similar but not significant. The disease association was highly significant when the number of either -308A or -238A sites in an individual was considered (P = 0.003). TNF-alpha promoter alleles are tightly linked to some HLA class I and II alleles, but multivariate analysis confirmed that the disease associations were independent of HLA, although a class I allele, A*6802, is also associated with disease. TNF-alpha was more frequently detected in tear samples from patients (27.6%) than from controls (15.9%), increasingly so for higher levels of detectable TNF-alpha (P = 0.015). Among patients, detectable TNF-alpha in tears was highly associated with the presence of ocular chlamydial infection (P < 0.001). The results indicate that TNF-alpha plays a major role in the tissue damage and scarring which occurs as a consequence of Chlamydia trachomatis infection.     

Pegylated peptides. V. Carboxy-terminal PEGylated analogs of growth hormone-releasing factor (GRF) display enhanced duration of biological activity in vivo

In the present study, human growth hormone-releasing factor (hGRF) and analogs were successfully pegylated at the carboxy-terminus using a novel solid- and solution-phase strategy. Following synthesis, these pegylated hGRF analogs were evaluated for in vitro and in vivo biological activity. Specifically, hGRF (1-29)-NH2, [Ala15]-hGRF (1-29)-NH2, [desNH2Tyr1, D-Ala2, Ala15]-hGRF(1-29)-NH2 and [His1, Val2, Gln8, Ala15, Leu27]-hGRF(1-32)-OH were each C-terminally extended using a Gly-Gly-Cys-NH2 spacer (previously demonstrated not to alter intrinsic biological activity), and then monopegylated via coupling to an activated dithiopyridyl-PEG reagent. PEG moieties of 750, 2000, 5000 or 10,000 molecular weight (MW) were examined to determine the effect of polymer weight on activity. Initial biological evaluations in vitro revealed that all C-terminally pegylated hGRF analogs retained high growth hormone (GH)-releasing potencies, regardless of the MW of PEG polymer employed. Two of these pegylated hGRF analogs, [desNH2Tyr1, D-Ala2, Ala15]-hGRF (1-29)-Gly-Gly-Cys(NH2)-S-Nle-PEG5000 and [His1, Val2, Gln8, Ala15, Leu27]-hGRF(1-32)-Gly-Cys(NH2)-S-Nle-PEG5000, were subsequently evaluated in both pig and mouse models and found to be highly potent (in vivo potency range = 12-55-fold that of native hGRF). Relative to their non-pegylated counterparts, these two pegylated hGRF analogs exhibited enhanced duration of activity.     

Adherence to pharmacologic management of hypertension

Adherence to pharmacologic therapy of hypertension is low (in the range of 50-70%) and has important implications both for blood pressure control and cardiovascular complications. Based on a review of the literature using the levels of evidence grading technique, determinants of adherence to the pharmacologic therapy of hypertension have been assessed. Additionally, interventions to improve compliance were evaluated. Patient-centred, health care provider-centred and drug-specific factors have all been shown to affect adherence rates. We conclude that the extent of adherence to pharmacologic therapy is modifiable. Measurable improvements in adherence can be obtained from simplified medication regimens and a combination of behaviour strategies, including the tailoring of pill-taking to patients' daily habits and rituals, the advocacy of self-monitoring of pills and blood pressure, and the institution of reward systems.     

A study on charge reduction in HfO/sub 2/ gate stacks

Charge in metal-organic chemical vapor deposition-grown HfO/sub 2/ gate stacks has been systematically studied using nMOS capacitors. It is found that, for these films, the charge in the stack is mainly concentrated at the interfaces between the layers and is negative at the HfO/sub 2//interfacial layer (IL) interface and positive at the Si/IL interface. In general, the calculated charge densities at both interfaces are of order 10/sup 12/ cm/sup -2/. A forming gas anneal (FGA) reduces both interface charge greatly. The FGA can also significantly reduce the hysteresis and interface state density. The effects of post deposition anneal at various temperatures and under various ambients have also been studied. It is found that a high-temperature dilute oxidizing ambient anneal followed by an FGA reduces the charge at both interfaces.     

Impact of the addition of an enzyme pool on an activated sludge system treating dairy wastewater under fat shock loads

BACKGROUND: The application of lipase‐rich enzyme pools (such as the crude solid enzymatic preparation (SEP) obtained from Penicillium restrictum solid‐state fermentation of agro‐industrial wastes) to activated sludge systems may be an effective strategy for preventing various operational problems. The continuous addition of SEP to the treatment system can become cost‐prohibitive when in situ production and/or storage are factored in. The application of SEP to high‐fat wastewater treatment would only be justified as an emergency measure, such as a sudden increase in the fat content of the bioreactor influent. Therefore, the primary objective of this work was to investigate the efficiency of a crude SEP during fat shock loads, simulated through the periodic addition of dairy industry waste containing high fat concentrations to the feed stock of an activated sludge system, operated in continuous mode. RESULTS: The test bioreactor exhibited a higher average chemical oxygen demand (COD) removal efficiency than the control bioreactor (83% for control and 90% for test) and the fat accumulation in the biological flocs of the test bioreactor was 3.2 times lower than that in the control bioreactor. Turbidity was also lower in the effluent of the test bioreactor (123 and 66 FTU in control and test, respectively) and it had a shorter recovery time between shock loads, especially when the interval between loads was shorter than one month (biweekly and weekly shock loads). CONCLUSION: The addition of SEP during fat overloads in the reactor feed maintained efficient COD removal in the test bioreactor for 270 days without any operational problems. Copyright © 2008 Society of Chemical Industry     

The Present Status and Potential of Kraft Lignin-Phenol-Formaldehyde Wood Adhesives

Kraft lignin (KL), a phenolic polymer formed during the kraft pulping process, is presently burned as a low value fuel. For decades, researchers have attempted to use KL as an inexpensive substitute for phenol in phenol-formaldehyde (PF) resins, but no one has produced a commercially satisfactory KL-PF resin. This paper reviews the literature on the present status of KL-PF adhesives and makes recommendations on needed research.

Kraft lignin solutions are complex mixtures which have broad molecular weight distributions, high viscosities, relatively low reactivities, and low solubilities. Attempts to overcome these inherent problems include methylolation of lignin to improve reactivity, the use of co-solvents to improve solubility, and ultrafiltration to yield more homogeneous molecular weight fractions. Future research efforts need to focus on understanding the fundamental chemical and physical properties of kraft lignin and its resins. The search for an economic lignin-based wood adhesive should continue.