CoopStor: a cooperative reliable and efficient data collection protocol in fault and delay tolerant wireless networks

Wireless Networks - Internet of things consist in the deployment of constrained and battery-powered devices with a radio interface. Most industrial applications require to respect strict...     

HERSCHEL—PACS Bolometer Arrays for Submillimeter Ground-Based Telescopes

The Herschel Space Observatory will carry onboard a new kind of bolometric architecture for the PACS (Photodetector Array Camera and Spectrometer) submillimeter photometer. These new generation CCD-like multiplexed bolometer arrays are buttable and enable the conception of large fully sampled focal planes either for space or for ground-based telescopes. We present here some development for ground-based applications in the context of the ARTEMIS (ARchitecture de bolomètres pour des TElescopes sub-MIllimétriques au Sol) project. We have developed an electro-thermal numerical model that simulates the performances of these semiconducting bolometers under specific ground-based conditions (different wavelengths and background powers for example). This model permits to determine the optimal parameters for each condition and shows that the bolometers can be background limited in each atmospheric transmission window between 200 and 450 microns. We also describe the optical system that provides a high optical efficiency in each submillimeter atmospheric window. Astronomical observations made with a prototype on the APEX telescope are presented.     

Blood lactate concentrations during incremental exercise in subjects with sickle cell trait

The need for lateral release or "venting" of the A2 and A4 pulleys either to facilitate repair of the flexor tendon(s) or to allow free gliding of the repair(s) was examined in 126 consecutive zone 2 flexor tendon injuries within the tendon sheath and distal to the distal edge of the A2 pulley (zones 2A and 2B of Tang's classification) in which at least one flexor tendon had been completely divided. This study showed that 81 (64%) of these repairs required venting of one or the other pulley. It was necessary to vent the A4 pulley between 10 and 100% of its length in 71 (56%) of the fingers and to vent the distal edge of the A2 pulley by 4 to 10 mm in 10 (8%) of the fingers.     

Laser damage resistance of hafnia thin films deposited by electron beam deposition, reactive low voltage ion plating, and dual ion beam sputtering

A comparative study is made of the laser damage resistance of hafnia coatings deposited on fused silica substrates with different technologies: electron beam deposition (from Hf or HfO(2) starting material), reactive low voltage ion plating, and dual ion beam sputtering. The laser damage thresholds of these coatings are determined at 1064 and 355 nm using a nanosecond pulsed YAG laser and a one-on-one test procedure. The results are associated with a complete characterization of the samples: refractive index n measured by spectrophotometry, extinction coefficient k measured by photothermal deflection, and roughness measured by atomic force microscopy.     

A high accuracy femto-/picosecond laser damage test facility dedicated to the study of optical thin films

A laser damage test facility delivering pulses from 100 fs to 3 ps and designed to operate at 1030 nm is presented. The different details of its implementation and performances are given. The originality of this system relies the online damage detection system based on Nomarski microscopy and the use of a non-conventional energy detection method based on the utilization of a cooled CCD that offers the possibility to obtain the laser induced damage threshold (LIDT) with high accuracy. Applications of this instrument to study thin films under laser irradiation are presented. Particularly the deterministic behavior of the sub-picosecond damage is investigated in the case of fused silica and oxide films. It is demonstrated that the transition of 0-1 damage probability is very sharp and the LIDT is perfectly deterministic at few hundreds of femtoseconds. The damage process in dielectric materials being the results of electronic processes, specific information such as the material bandgap is needed for the interpretation of results and applications of scaling laws. A review of the different approaches for the estimation of the absorption gap of optical dielectric coatings is conducted and the results given by the different methods are compared and discussed. The LIDT and gap of several oxide materials are then measured with the presented instrument: Al(2)O(3), Nb(2)O(5), HfO(2), SiO(2), Ta(2)O(5), and ZrO(2). The obtained relation between the LIDT and gap at 1030 nm confirms the linear evolution of the threshold with the bandgap that exists at 800 nm, and our work expands the number of tested materials.     

Activities,postures and comfort perception of train passengers as input for train seat design

Working in the train is a part of new ways of working. However, the ideal working position is unknown. Moreover, the ideal position for leisure and relaxing is also unknown. This article defines what activities train passengers mainly perform and which corresponding postures are seen. Based on the observations on actual train rides, four main activities could be identified: Reading, Staring/sleeping, Talking and Working on laptop. Working on laptop was the activity with the longest duration and talking had the shortest duration. Associated with these four activities, a top eight of different postures were observed. Except for headrest comfort, comfort scores were not significantly different between activities. The top eight corresponding postures combined with comfort scores showed that per activity different postures were observed and the comfort scores varied in relation to the combination of posture and activity. Nearly for all activities, the majority of passengers preferred adjustability options to fit the seat to the performed activity.