Te concentration dependent photoemission and inverse-photoemission study of FeSe1?xTex

We have characterized the electronic structure of FeSe_1−xTe_x for various x values using soft x-ray photoemission spectroscopy (SXPES), high-resolution photoemission spectroscopy (HRPES) and inverse photoemission spectroscopy (IPES). The SXPES valence band spectral shape shows that the 2 eV feature in FeSe, which was ascribed to the lower Hubbard band in previous theoretical studies, becomes less prominent with increasing x. HRPES exhibits systematic x dependence of the structure near the Fermi level (E_F): its splitting near E_F and filling of the pseudogap in FeSe. IPES shows two features, near E_F and approximately 6 eV above E_F; the former may be related to the Fe 3d states hybridized with chalcogenide p states, while the latter may consist of plane-wave-like and Se d components. In the incident electron energy dependence of IPES, the density of states near E_F for FeSe and FeTe has the Fano lineshape characteristic of resonant behavior. These compounds exhibit different resonance profiles, which may reflect the differences in their electronic structures. By combining the PES and IPES data the on-site Coulomb energy was estimated at 3.5 eV for FeSe.     

Development of a simple method for fabrication of transparent conductive films with high mechanical strength

We have developed a simple method of fabricating transparent conductive films with a high mechanical strength on glass and indium tin oxide substrates. It does not require a large excess of organic solvents and polymerization catalysts and can yield smooth films by spin-coating of a mixture of a commercially available aqueous dispersion of poly(3,4-ethylenedioxythiophene)-poly(4-styrene sulfonate) and a neat liquid of tetraethyl orthosilicate. Preparation conditions such as feed ratio, kinds of additives, and annealing temperature and time were optimized to give highly conductive, transparent and mechanically strong films.     

Hole-injection properties of annealed polythiophene films to replace PEDOT–PSS in multilayered OLED systems

Hole-injection properties of annealed poly(alkoxy- and alkylthiophene) films in OLEDs were studied. Among them, annealed poly(3,3′-dihexyloxy-2,2′-bithiophene) (aPHOBT) film exhibited good hole-injection properties and a triple-layered OLED with the structure ITO/aPHOBT/PVK/Alq3/Mg–Ag (device I) showed much higher performance than a double-layered device without the aPHOBT layer (device II, ITO/PVK/Alq3/Mg–Ag). Device I was slightly inferior to a device having a PEDOT–PSS layer as the hole injector (device III, ITO/PEDOT– PSS/PVK/Alq3/Mg–Ag) in the low-intermediate region of the applied voltage (6–11 V), but gave comparable luminance to III when the applied voltage exceeded 11 V.     

Bax and Bcl-2 expressions predict response to radiotherapy in human cervical cancer

PURPOSE: The ratio of Bcl-2 to Bax expression determines survival or death following an apoptotic stimulus. In order to establish a new predictor of the outcome of treatment for human cervical carcinoma, we investigated the relationship between the expressions of the Bax and Bcl-2 proteins and the response to radiotherapy after the administration of 10.8 Gy. METHODS: A total of 44 patients with histologically proven carcinoma of the uterine cervix, including three with recurrent cervical stump carcinomas, were treated with definitive radiotherapy. The presence of mutations in exons 5-8 of the p53 gene was analyzed by a single-strand conformation polymorphism analysis and DNA sequencing. RESULTS: Forty patients were found to have wild-type p53, and the remaining four had mutant p53. The Bax and Bcl-2 protein expressions prior to radiotherapy did not correlate with response and survival. However, the Bax and Bcl-2 protein expressions after radiotherapy correlated with both response and survival. Bax-positive tumors showed significantly better responses than the Bax-negative tumors after 10.8 Gy radiation (P = 0.0002). In contrast, the Bcl-2-positive tumors showed significantly poorer responses than the Bcl-2-negative tumors after radiation (P = 0.002). Increased Bax expression after the 10.8 Gy radiotherapy was found to be correlated with good survival (P = 0.04). In contrast, increased Bcl-2 expression after such radiotherapy was correlated with poor survival (P = 0.002). CONCLUSION: The levels of Bax and Bcl-2 expression after 10.8 Gy radiotherapy are useful prognostic markers in patients with human cervical carcinoma.     

Operation of a two-stage fermentation process producing hydrogen and methane from organic waste

A pilot-scale experimental plant for the production of hydrogen and methane by a two-stage fermentation process was constructed and operated using a mixture of pulverized garbage and shredded paper wastes. Thermophilic hydrogen fermentation was established at 60 degrees C in the first bioreactor by inoculating with seed microflora. Following the hydrogenogenic process, methanogenesis in the second bioreactor was conducted at 55 degrees C using an internal recirculation packed-bed reactor (IRPR). After conducting steady-state operations under a few selected conditions, the overall hydraulic retention time was optimized at 8 d (hydrogenogenesis, 1.2 d; methanogenesis, 6.8 d), producing 5.4 m3/m3/d of hydrogen and 6.1 m3/m3/d of methane with chemical oxygen demand and volatile suspended solid removal efficiencies of 79.3% and 87.8%, respectively. Maximum hydrogen production yield was calculated to be 2.4 mol/mol hexose and 56 L/kg COD loaded. The methanogenic performance of the IRPR was stable, although the organic loading rate and the composition of the effluent from the hydrogenogenic process fluctuated substantially. A clone library analysis of the microflora in the hydrogenogenic reactor indicated that hydrogen-producing Thermoanaerobacterium-related organisms in the inoculum were active in the hydrogen fermentation of garbage and paper wastes, although no aseptic operations were applied. We speculate that the operation at high temperature and the inoculation of thermophiles enabled the selective growth of the introduced microorganisms and gave hydrogen fermentation efficiencies comparable to laboratory experiments. This is the first report on fermentative production of hydrogen and methane from organic waste at an actual level.     

Development of anchored oligothiophenes on substrates for the application to the tunable transparent conductive films

Bis(triethoxysilyl)-substituted oligothiophene with a moderate π-conjugation length was newly synthesized and polymerized to give a polysilsesquioxane network having oligothiophene units dispersed homogeneously without phase separation. The polymer was fixed on glass or ITO substrate by spin-coating and annealing. The resulting film exhibited a high mechanical strength due to the covalent bonding with the substrates, and was electrochemically stable even after 300 redox cycles in electrolyte solution. Chemical oxidation of the polymer films yielded electrically conductive and almost transparent films.     

Light reflection at polyaniline films and its application to a kinetic study of polymer chain conformation

Light reflection at polymer-coated electrodes is studied for polyaniline, poly(o-methylaniline), and poly(o-methoxyaniline). Reflected light intensity is found to be affected greatly by the applied potential for the two reasons: one is absorption of light due to coloring of the oxidized polymer film and the other is light scattering which is concerned with a polymer chain conformation upon oxidation. A new method based on the potential dependence of light reflection is proposed for studying kinetics of conformational changes of polymer chains. The rate constants evaluated are in the range of 0.05-8 s⁻¹ at room temperature, depending on the sort of polymers, the film thickness, and pH of the solution. Irrespective of the sort of polymers, the increase in film thickness or solution pH leads to the decrease of the rate constant. It is found that a film morphology has a significant effect on the rate constant, as confirmed by a comparison of rate constants observed with polyaniline films grown at different rates.     

Curcumin attenuates diabetic nephropathy by inhibiting PKC-α and PKC-β1 activity in streptozotocin-induced type I diabetic rats

Scope : We hypothesized that curcumin, a potent anti‐oxidant, might be beneficial in ameliorating the development of diabetic nephropathy through inhibition of PKC‐α and PKC‐β1 activity‐ERK1/2 pathway. Methods and results : Diabetes was induced by a single intraperitoneal injection of streptozotocin (STZ) (55 mg/kg) in rats. Three weeks after STZ injection, rats were divided into three groups, namely, normal, diabetic and diabetic treated with curcumin at 100 mg/kg/day, p.o., for 8 wk. At 11 wk after STZ injection, diabetic rats exhibited renal dysfunction, as evidenced by reduced creatinine clearance, increased blood urea nitrogen (BUN) and proteinuria, marked increases in lipid peroxidation, NOX4 and p67phox and decrease in anti‐oxidant enzyme. All of these abnormalities were significantly reversed by curcumin. Furthermore, the high‐glucose‐induced PKC‐α and PKC‐β1 activities and phosphorylated ERK1/2 was significantly diminished by curcumin. Curcumin also attenuated the expression of TGF‐β1, CTGF, osteopontin, p300 and ECM proteins such as fibronectin and type IV collagen. The high‐glucose‐induced expression of VEGF and its receptor VEGF receptor II (flk‐1) was also ameliorated by curcumin. Conclusion : These results prove that curcumin produces dual blockade of both PKC‐α and PKC‐β1 activities, which suggests that curcumin is a potential adjuvant therapy for the prevention and treatment of diabetic nephropathy.