Thermal stability in bulk cryomilled ultrafine-grained 5083 Al alloy

Thermal stability in bulk ultrafine-grained (UFG) 5083 Al that was processed by gas atomization followed by cryomilling, consolidation, and extrusion, and that exhibited an average grain size of 305 nm, was investigated in the temperature range of 473 to 673 K (0.55 to 0.79 T _m , where T _m is the melting temperature of the material) for different annealing times. Appreciable grain growth was observed at temperatures > 573 K, whereas there was limited grain growth at temperatures < 573 K even after long annealing times. The values of the grain growth exponent, n, deduced from the grain growth data were higher than the value of 2 predicted from elementary grain growth theories. The discrepancy was attributed to the operation of strong pinning forces on boundaries during the annealing treatment. An examination of the microstructure of the alloy suggests that the origin of the pinning forces is most likely related to the presence of dispersion particles, which are mostly introduced during cryomilling. Two-grain growth regimes were identified: the low-temperature region (<573 K) and the high-temperature region (>573 K). For temperatures lower than 573 K, the activation energy of 25 ± 5 kJ/mol was determined. It is suggested that this low activation energy represents the energy for the reordering of grain boundaries in the UFG material. For temperatures higher than 573 K, an activation energy of 124 ± 5 kJ/mol was measured. This value of activation energy, 124 ± 5 kJ/mol, lies between that for grain boundary diffusion and lattice diffusion in analogous aluminum polycrystalline systems. The results show that the strength and ductility of bulk UFG 5083 Al, as obtained from tensile tests, correlate well with substructural changes introduced in the alloy by the annealing treatment.     

Group technology based adaptive cell formation using predator-prey genetic algorithm

In recent years, there has been a considerable growth of application of group technology in cellular manufacturing. This has led to investigation of the primary cell formation problem (CFP), both in classical and soft-computing domain. Compared to more well-known and analytical techniques like mathematical programming which have been used rigorously to solve CFPs, heuristic approaches have yet gained the same level of acceptance. In the last decade we have seen some fruitful attempts to use evolutionary techniques like genetic algorithm (GA) and Ant Colony Optimization to find solutions of the CFP. The primary aim of this study is to investigate the applicability of a fine grain variant of the predator-prey GA (PPGA) in CFPs. The algorithm has been adapted to emphasize local selection strategy and to maintain a reasonable balance between prey and predator population, while avoiding premature convergence. The results show that the algorithm is competitive in identifying machine-part clusters from the initial CFP matrix with significantly less number of iterations. The algorithm scaled efficiently for large size problems with competitive performance. Optimal cluster identification is then followed by removal of the bottleneck elements to give a final solution with minimum inter-cluster transition cost. The results give considerable impetus to study similar NP-complete combinatorial problems using fine-grain GAs in future.     

Remote-Controlled Ambidextrous Robot Hand Concept

In the development of robotic limbs, the side of members is of importance to define the shape of artificial limbs and the range of movements. It is mainly significant tbr biomedical applications concerning patients suffering arms or legs injuries, fn this paper, the concept of an ambidextrous design lbr robot hands is introduced. The fingers can curl in one xvay or another, to imitate either a right hand or a left hand. The advantages and inconveniences of different models have been investigated to optimise the range and the maximum force applied by fingers. Besides, a remote control interthce is integrated to the system, allowing both to send comrnands through internet and to display a video streaming of the ambidextrous hand as feedback. Therefore, a robotic prosthesis could be used for the first time in telerehabilitation. The main application areas targeted are physiotherapy alter strokes or management of phantom pains/br amputees by/earning to control the ambidextrous hand. A client application is also accessible on Facehook social network, making the robotic limb easily reachable for the patients. Additionally the ambidextrous hand can be used tbr robotics research as well as artistic performances.     

AVCOL: Availability-aware information aggregation in large distributed systems under uncollaborative behavior

Aggregation of system-wide information in large-scale distributed systems, such as p2p systems and Grids, can be unfairly influenced by nodes that are selfish, colluding with each other, or are offline most of the time. We present AVCOL, which uses probabilistic and gossip-style techniques to provide availability-aware aggregation. Concretely, AVCOL is the first aggregation system that: (1) implements any (arbitrary) global predicate that explicitly specifies any node’s probability of inclusion in the global aggregate, as a mathematical function of that node’s availability (i.e., percentage time online); (2) probabilistically tolerates large numbers of selfish nodes and large groups of colluders; and (3) scales well with hundreds to thousands of nodes. AVCOL uses several unique design decisions: per-aggregation tree construction where nodes are allowed a limited but flexible probabilistic choice of parents or children, probabilistic aggregation along trees, and auditing of nodes both during aggregation as well as in gossip-style (i.e., periodically). We have implemented AVCOL, and we experimentally evaluated it using real-life churn traces. Our evaluation and our mathematical analysis show that AVCOL satisfies arbitrary predicates, scales well, and withstands a variety of selfish and colluding attacks.     

Parallel crypto-devices for GF(p) elliptic curve multiplication resistant against side channel attacks

All elliptic curve cryptographic schemes are based on scalar multiplication of points, and hence its faster computation signifies faster operation. This paper proposes two different parallelization techniques to speedup the GF(p) elliptic curve multiplication in affine coordinates and the corresponding architectures. The proposed implementations are capable of resisting different side channel attacks based on time and power analysis. The 160, 192, 224 and 256 bits implementations of both the architectures have been synthesized and simulated for both FPGA and 0.13μ CMOS ASIC. The final designs have been prototyped on a Xilinx Virtex-4 xc4vlx200-12ff1513 FPGA board and performance analyzes carried out. The experimental result and performance comparison show better throughput of the proposed implementations as compared to existing reported architectures.     

Dynamic Grover search: applications in recommendation systems and optimization problems

In the recent years, we have seen that Grover search algorithm (Proceedings, 28th annual ACM symposium on the theory of computing, pp. 212–219, 1996) by using quantum parallelism has revolutionized the field of solving huge class of NP problems in comparisons to classical systems. In this work, we explore the idea of extending Grover search algorithm to approximate algorithms. Here we try to analyze the applicability of Grover search to process an unstructured database with a dynamic selection function in contrast to the static selection function used in the original work (Grover in Proceedings, 28th annual ACM symposium on the theory of computing, pp. 212–219, 1996). We show that this alteration facilitates us to extend the application of Grover search to the field of randomized search algorithms. Further, we use the dynamic Grover search algorithm to define the goals for a recommendation system based on which we propose a recommendation algorithm which uses binomial similarity distribution space giving us a quadratic speedup over traditional classical unstructured recommendation systems. Finally, we see how dynamic Grover search can be used to tackle a wide range of optimization problems where we improve complexity over existing optimization algorithms.     

Effect of Polysaccharides on the Properties of the Mucoadhesive Poly(Vinyl Alcohol) Multicore–Shell Microparticles

This study discusses about the effect of polysaccharides (agar, gum tragacanth, and guar gum) on the properties of the core (organogel)–shell [poly(vinyl alcohol)] microparticles. The size, swelling, and mucoadhesive properties of the poly(vinyl alcohol) microparticles were altered in the presence of the polysaccharides. Thermal analysis confirmed the presence of organogels within the microparticles. Fourier transform infrared spectroscopy confirmed the presence of the polysaccharides within the microparticles. The microparticles were biocompatible in nature. Drug release indicated that an alteration in the shell composition can be used for altering drug release. Ciprofloxacin-loaded microparticles showed sufficient antimicrobial efficiency.     

Studies on spinel cobaltites,MCo2O4 (M = Mn,Zn, Fe,Ni and Co) and their functional properties

Optimization of electrodes for charge storage with appropriate processing conditions places significant challenges in the developments for high performance charge storage devices. In this article, metal cobaltite spinels of formula MCo₂O₄ (where M = Mn, Zn, Fe, Ni and Co) are synthesized by oxalate decomposition method followed by calcination at three typical temperatures, viz. 350, 550, and 750 °C and examined their performance variation when used as anodes in lithium ion batteries. Phase and structure of the materials are studied by powder x-ray diffraction (XRD) technique. Single phase MnCo2O4,ZnCo2O4 and Co3O4 are obtained for all different temperatures 350 °C, 550 °C and 750 °C; whereas FeCo₂O₄ and NiCo₂O₄ contained their constituent binary phases even after repeated calcination. Morphologies of the materials are studied via scanning electron microscopy (SEM): needle-shaped particles of MnCo₂O₄ and ZnCo₂O₄, submicron sized particles of FeCo₂O₄ and agglomerated submicron particle of NiCo₂O₄ are observed. Galvanostatic cycling has been conducted in the voltage range 0.005–3.0 V vs. Li at a current density of 60 mA g^?1 up to 50 cycles to study their Li storage capabilities. Highest observed charge capacities are: MnCo₂O₄ – 365 mA h g^?1 (750 °C); ZnCo₂O₄ – 516 mA h g^?1 (550 °C); FeCo₂O₄ – 480 mA h g^?1 (550 °C); NiCo₂O₄ – 384 mA h g^?1 (750 °C); and Co₃O₄ – 675 mA h g^?1 (350 °C). The Co₃O₄ showed the highest reversible capacity of 675 mA h g^?1; the NiO present in NiCo₂O₄ acts as a buffer layer that results in improved cycling stability; the ZnCo₂O₄ with long needle-like shows good cycling stability.     

Failure analysis of air pre-heater tubes of a petrochemicals plant

Heat resistant alloy tubes used in the higher temperature range of 1150–1273 K depends on the protective scale integrity for prevention of corrosion induced premature failures in a mixed gas environment with potential corrodents for oxidation, carburization and sulphidation attack. Cast HK40+Nb alloy tubes of an air pre-heater unit of a petrochemical industry failed prematurely after 13,000 h in service. The unit used smoke gas containing gaseous corrodents that could cause oxidation/sulphidation/carburization type of attack. Failed parts showed crack/punctures below the corrosion product filled pits. The crack occurred in the fully carburized zone present at the thinned out centre of the pit. Factors like excessive temperature cycling, overheating, presence of impurities either in the pre-heating gas mixture or that got introduced while in operation were found to be the reasons for breach of protective scale integrity leading to unwarranted corrosion attack resulting in thinning of tube material and internal corrosion penetration which finally led to premature failure.