Concentration of docosahexaenoic acid in glyceride by hydrolysis of fish oil withcandida cylindracea lipase

In an attempt to concentrate the content of DHA (docosahexaenoic acid) in a glyceride mixture containing triglyceride, diglyceride and monoglyceride, fish oil was hydrolyzed with six kinds of microbial lipase. After the hydrolysis, free fatty acid was removed and fatty acid components of the glyceride mixtures were analyzed. When the hydrolysis withCandida cylindracea lipase was 70% complete, the DHA content in the glyceride mixture was three times more than that in the original fish oil. The EPA (eicosapentaenoic acid) content became almost 70% of the original fish oil. Hydrolysis with other lipases did not result in an increase in the DHA content in the glyceride mixtures. Hydrolysis of DHA-rich tuna oil (DHA content is about 25%) withCandida cylindracea lipase resulted in 53% DHA in the glyceride mixture. The EPA content, however, remained close to that of the original tuna oil. In this report, the acyl chain specificity of lipases is evaluated in terms of hydrolysis resistant value (HRV). HRV is the ratio between the DHA contents in the glyceride mixture of hydrolyzed oil and original oil. HRV clearly indicates differences in hydrolysis between DHA and other fatty acids (e.g., saturated and monoenoic acids).     

Recent activities in antennas and propagation in Japan

Activities since August 1989 are covered. Included are antennas for mobile communication, multibeam earth station antennas, satellite-borne antennas for communication, and for earth remote sensing, direct broadcast satellite antennas, and propagation studies for land mobile radio, mobile satellite systems, fixed satellite systems, and terrestrial propagation     

Preparation and characterization of membranes with positively charged main chain from polyethylenimine

A membrane, which has positively charged groups in the polymer main chain, was prepared from polyethylenimine by crosslinking and successive alkylation. Dibromoalkane was used as a crosslinking agent. The crosslinked membrane was alkylated using methyl iodide under several conditions. Elemental and ICP emission analyses were introduced to measure the rates of alkylation and quaternization. From the membrane potential measurement, the effective charge density was estimated. The highest value was about 1.0 M, which was obtained by a prolonged alkylation time. This value was larger than that of some commercial ion exchange membranes. The effective charge density, which was obtained by the last alkylation procedure, was 10 times larger than that of the former one, though the rate of quaternizing increased by less than a factor of two. This implies that the activity constant in the membrane increased when the charge density is increased. © 1993 John Wiley & Sons, Inc.     

Identification of an endonuclease responsible for apoptosis in rat thymocytes

We studied total occlusion of all three coronary arteries. From 1975 to 1992, a total of 4,100 patients underwent coronary arteriography at Show University Hospital. Of these, four patients (0.1%) had complete occlusion of all three coronary arteries and all of them underwent coronary artery bypass grafting (CABG). The mean numbers of coronary risk factors were only 2.3 but history of angina of effort were long-standing such as 4 to 29 years (mean 16.3 yr). All cases had previous episodes of myocardial infarction. Three cases (75%) had aortic aneurysm. One case was also diagnosed as Leriche syndrome besides coexisting aneurysm. Coronary arteriogram showed total occlusion of right coronary artery, left anterior descending artery and left circumflex artery in the segment of 1.6 or 7 and 11 respectively. All cases had intracoronary anastomosis and intercoronary anastomosis. Among 12 occluded coronary arteries of all four cases, 11 were distally visualized with contrast medium via collateral flow but good opacification of the distal coronary trees were not seen. Also proper assessments of cardiac performance including viability of myocardium were not established because all cases were in the state of C.C.S grades IV. But significant clinical recovery were obtained in all cases after CAGB of three or four bypass. We conclude that these results might be a useful suggestion for the treatment of total occlusion of all three coronary arteries.     

Physicochemical properties of rare earth perovskite oxides used as gas sensor material

The change of the conductivity in the rare earth perovskite oxide took place after the chemisorption of flammable gases. The sensitivity for methanol was highest. From the conductivity change of these perovskite oxides after the injection of methanol, the energy needed to promote an electron from a conducting to a nonconducting state, E=E _c-E _t, could be derived from the equation=A ₀ exp (–E/kT). LnCoO₃ had the smallest E and H (metal-O), which is the binding energy of oxygen coordinating to the metal ions, but exhibited the highest activity for gas sensing. The gas sensing mechanism was also considered.     

Radiation grafting of α,β,β-trifluoroethylenesulfonyl fluoride onto low-density polyethylene film by simultaneous irradiation method. I. Kinetic study of simultaneous-irradiation grafting

α,β,β-Trifluoroethylenesulfonyl fluoride (TFESF) was grafted onto polyethylene (PE) film by a simultaneous-irradiation method. The influences of the grafting conditions were analyzed kinetically. The dependencies of the grafting rate on the dose rates and monomer concentrations ranging from 10 to 75% were found to be of 1 and 0 order, respectively. The overall activation energy for the graft polymerization was 2.05 × 10⁴ J/mol. The grafting rate was found to be independent of the film thicknesses ranging from 25 to 100 μm.     

Hot isostatic pressing of tetragonal ZrO2 solid-solution powders prepared from acetylacetonates in the system ZrO2-Y2O3-Al2O3

In compositions having ZrO₂/Y₂O₃=(74.25–71.25)/(0.75–3.75) (mol% ratio) with 25 mol% Al₂O₃, metastable t-ZrO₂ solid solutions crystallize at 780° to 860°C from amorphous materials prepared by the simultaneous hydrolysis of zirconium, yttrium and aluminium acetylacetonates. Hot isostatic pressing has been performed for 1 h at 1130 and 1230°C under 196 MPa using their powders. Two kinds of material are fabricated: (i) perfect ZrO₂ solid-solution ceramics and (ii) composites of ZrO₂ solid solution and -Al₂O₃. Their mechanical properties are examined, in connection with microstructures and t/m ZrO₂ ratios. Composites with a homogeneous dispersed -Al₂O₃ derived from solid-solution ceramics result in a remarkable increase of strength.     

Discovery of a Novel Scaffold as an Indoleamine 2,3‐Dioxygenase 1 (IDO1) Inhibitor Based on the Pyrrolopiperazinone Alkaloid,Longamide B

Indoleamine 2,3‐dioxygenase 1 (IDO1) has emerged as a key target for cancer therapy, as IDO1 plays a critical role in the capacity of tumor cells to evade the immune system. The pyrrolopiperazinone alkaloid longamide B and its derivatives were identified as novel IDO1 inhibitors based on docking studies and small library synthesis. The thioamide derivative showed higher IDO1 inhibitory activity than longamide B, and displayed an activity similar to that of a representative IDO1 inhibitor, 1‐methyl‐tryptophan. These results suggest that the pyrrolopiperazinone scaffold of longamide B could be used in the development of IDO1 inhibitors.