Pull-Down of Metalloproteins in Their Native States by Using Desthiobiotin-Based Probes

One-third of all proteins are estimated to require metals for structural stability and/or catalytic activity. Desthiobiotin probes containing metal binding groups can be used to capture metalloproteins with exposed active-site metals under mild conditions so as to prevent changes in metallation state. The proof-of-concept was demonstrated with carbonic anhydrase (CA), an open active site, Zn²⁺-containing protein. CA was targeted by using sulfonamide derivatives. Linkers of various lengths and structures were screened to determine the optimal structure for capture of the native protein. The optimized probes could selectively pull down CA from red blood cell lysate and other protein mixtures. Pull-down of differently metallated CAs was also investigated.     

Electrical conductivity in iodine-doped ethyl cellulose

The electrical conductivity of solution-grown ethyl cellulose (EC) films, 5–30 μm thick, has been studied in the sandwich configuration (metal–EC–metal) as a function of iodine concentration from 0.5 to 5.0 wt% ratio. The studies were conducted in the temperature range 333–383 K, while the field was varied over the range (3.0–5.5) × 10⁴V/cm. Aluminium was used as the lower electrode, while the upper electrode was of Al, Ag, Cu, Au or Sn. Certain transient effects such as a large burst of current immediately after the application of field were observed. An attempt was made to identify the nature of the current by comparing the observed dependence on electric field, electrode material and temperature with the respective characteristic features of the existing theories of electrical conduction. The results show that the electrical conduction follows Ohm's law at lower fields, while at higher fields, space-charge limited current (SCLC) was observed. It was also found that Richardson–Schottky emission was responsible, to some extent, for the transport of charge carriers in the polymer. The conductivity of the films increased on doping with iodine. The dopant molecules are considered to act as additional trapping centes and provide links between the polymer molecules in the amorphous region, thus resulting in the formation of charge transfer complexes.     

Synchronised carrier-based SVPWM signal generation scheme for the entire modulation range extending up to six-step mode using the sampled amplitudes of reference phase voltages

The issues in synchronised implementation of space vector-based pulse width modulation (SVPWM) signal generation are addressed on a conventional DSP platform. With the present day digital signal processors (DSPs) with clock over 10 MHz, it is possible to include additional tasks for synchronisation in the interrupt service routine (ISR). Also, the task of the synchronisation can be easily accommodated within the same ISR without disturbing the time critical pulse width modulation (PWM) operation. The authors systematically present the additional software requirements to determine the time period proportional to the half carrier switching time interval that is required for the synchronisation. First, the DSP implementation of the conventional multi-level SVPWM based on the sampled amplitudes of reference voltages is presented and then the additional requirements to maintain the PWM in synchronisation are discussed. The simulation results as well as experimental results are presented for a five-level PWM signal generation. A five-level inverter configuration, using a 1.5 kW open-end winding induction motor drive, is used for experimentally verifying the SVPWM     

A bi-criteria model for the inventory aggregation problem under risk pooling

Inventory aggregation, also called Risk Pooling, is one of the most efficient ways to reduce the level of safety stocks thereby reducing inventory across the supply chain. Determining the best level of aggregation is a difficult problem and needs extensive study of all the possible scenarios that can affect this decision. Minimizing costs in a supply chain is no longer the sole priority of businesses. Maintaining a high level of responsiveness is also considered equally important. The conflicting nature of these two criteria makes the solution of the problem difficult. In this paper, we develop a bi-criteria nonlinear stochastic integer programming model to determine the best supply chain distribution network to meet customer demands, where minimizing costs while maintaining high levels of responsiveness is important. We develop a two-stage optimization algorithm to solve this problem.     

Electrical conduction in non-metallic rare-earth solids

Schematic energy band diagrams for the genesis of charge carriers in non-metallic rare-earth solids have been presented. It has been shown that positions of 4f bands have significant effect on the genesis and nature of charge carriers, their conduction mechanism and magnitude of electrical conductivity () and Seebeck coefficient (S) of the solid. Relevant relations have been given for both and S in different situations. Experimental data on rare-earth sesquioxides (R₂O₃), rare-earth tungstates [R₂(WO₄)₃] and rare-earth molybdates [R₂(MoO₄)₃] in the intrinsic range have been explained as examples for the validity of energy band diagrams.     

Analytical studies on the temperature distribution in spiral plate heat exchangers: Straightforward design formulae for efficiency and mean temperature difference

The temperature distribution in spiral plate heat exchangers has been calculated numerically to obtain the efficiency and the logarithmic mean temperature difference (LMTD) correction factors F as a function of the number of transfer units N, the number of turns n, and the heat capacity rate ratio C. It has been found that the LMTD correction factors, when plotted against the number of transfer units per turn N/n, fall approximately on a single curve. That curve for balanced countercurrent operation (C = −1) can be very closely represented by the simple formula F = (n/N)tanh(N/n). From that simple analytic representation of our numerical results it was concluded that a simpler physical model might exist to represent the overall behaviour of a spiral plate heat exchanger equally well. In fact, a countercurrent cascade of n cocurrent heat exchangers does result exactly in the above-mentioned formula for the LMTD correction factor. From that model the F-factors for other heat capacity rate ratios C (−1 < C 0) can also be calculated and they are in sufficient agreement with the numerical results.     

Bioenergy,food security and poverty reduction: trade-offs and synergies along the water–energy–food security nexus

This article provides a review of trade-offs and synergies of bioenergy within the water–energy–food security nexus, with emphasis on developing countries. It explores the links of bioenergy with food security, poverty reduction, environmental sustainability, health, and gender equity. It concludes that applying the nexus perspective to analyses of bioenergy widens the scope for achieving multiple-win outcomes along the above aspects.     

Integrating functional,social, and psychological determinants to explain online social networking usage

People involved in business are increasingly aware of the online social phenomenon and its potential as a marketing tool. Building upon the marketing, social psychology, and information system literature, this study empirically examines a set of functional determinants derived from the technology acceptance model and socio-psychological determinants drawn from the theory of reasoned action and social cognitive theory that may be responsible for the motivations of participants in online social networks. We propose a model by integrating functional, social, and psychological factors in predicting attitude and online social network usage. The survey outcomes from a cross-sectional study among 387 Facebook users in Malaysia support the hypothesised model. This study contributes by extending the cognitive learning theories in predicting online social networking usage. Particularly, this research presents a different perspective on online social networking by exploring the mediating effect of attitude and the moderating role of individual characteristics. This study demonstrates that desirable changes in the perception of functional benefits, self-efficacy, and need for cognition as well as perceptions of social pressure from significant others might lead to corresponding changes in attitude towards online social networking. Results of the study support the model efficacy and predictive ability of the proposed integrative model which may serve as a theoretical foundation for future researchers interested in examining other virtual community engagements such as blogging, online advertising, and online public relations activities.     

Morphology,Mineralogy and Mixing of Individual Atmospheric Particles Over Kanpur (IGP): Relevance of Homogeneous Equivalent Sphere Approximation in Radiative Models

Estimation of the direct radiative forcing (DRF) by atmospheric particles is uncertain to a large extent owing to uncertainties in their morphology (shape and size), mixing states, and chemical composition. A region-specific database of the aforementioned physico-chemical properties (at individual particle level) is necessary to improve numerically-estimated optical and radiative properties. Till date, there is no detailed observation of the above mentioned properties over Kanpur in the Indo-Gangetic Plain (IGP). To fill this gap, an experiment was carried out at Kanpur (IITK; 26.52°N, 80.23°E, 142 m msl), India from April to July, 2011. Particle types broadly classified as (a) Cu-rich particles mixed with carbon and sulphur (b) dust and clays mixed with carbonaceous species (c) Fe-rich particles mixed with carbon and sulfur and (d) calcite (CaCO₃) particles aged with nitrate, were observed. The frequency distributions of aspect ratio (AR; indicator of extent of particle non-sphericity) of total 708 particles from April to June reveal that particles with aspect ratio range >1.2 to ≤1.4 were abundant throughout the experiment except during June when it was found to shift to high AR range, >1.4 to ≤1.6 (followed with another peak of AR i.e. >2 to ≤2.4) due to dust storm conditions enhancing the occurrence of more non-spherical particles over the sampling site. The spherical particles (and close to spherical shape; AR range, 1.0 to ≤1.2) were found to be <20% throughout the experiment with a minimum (11.5%) during June. Consideration of Homogeneous Equivalent Sphere Approximation (HESA) in the optical/radiative model over the study region is found to be irrelevant during the campaign.