Process optimisation in sunflower oil extraction by supercritical CO2

A continuous process for the extraction of sunflower oil using supercritical CO₂, featuring multiple extractors, one oil separator and three cascaded CO₂ recovery vessels operating at different pressures, was devised and studied. For every single equipment of the plant making up the process a mathematical model was built. Experimental tests—consisting in measurements of oil solubility in supercritical CO₂—were carried out in a laboratory-scale apparatus to characterise the behaviour of sunflower oil in the separation from the supercritical fluid. The mathematical model of the whole process was coded in the commercial gPROMS process modelling environment where both its simulation and optimisation—this latter assuming the overall oil production cost as the objective function—were carried out. The process- and economics-related results are discussed and compared with those obtained with traditional and cold-pressing extraction.     

Kinetics of discontinuous precipitation in a Zn-2.5 at % Cu alloy

The morphology and growth kinetics of discontinuous precipitation in a Zn-2.5 at % Cu alloy have been studied in the temperature range 383–583 K by optical and scanning electron microscopy. The precipitate phase has a lamellar morphology, and maintains a statistically constant interlamellar spacing under isothermal growth conditions. The interlamellar spacing increases with an increase in temperature. The isothermal growth kinetics in terms of reaction front migration rate is maximum at 523 K. The upper temperature limit for the occurrence of reaction in this alloy has been predicted to be 643 K. A detailed kinetic analysis of the experimental data using several analytical models has confirmed discontinuous precipitation in this system to be a boundary diffusion controlled reaction, and enabled the determination of the grain boundary chemical diffusivity of Cu in a Zn-rich Zn-Cu alloy in the temperature range studied. The corresponding activation energy values determined in this study, range between 65 to 86 kJ/mol^–1, which compare well with the relevant data in the literature.     

Deductive verification of alternating systems

Alternating systems are models of computer programs whose behavior is governed by the actions of multiple agents with, potentially, different goals. Examples include control systems, resource schedulers, security protocols, auctions and election mechanisms. Proving properties about such systems has emerged as an important new area of study in formal verification, with the development of logical frameworks such as the alternating temporal logic ATL*. Techniques for model checking ATL* over finite-state systems have been well studied, but many important systems are infinite-state and thus their verification requires, either explicitly or implicitly, some form of deductive reasoning. This paper presents a theoretical framework for the analysis of alternating infinite-state systems. It describes models of computation, of various degrees of generality, and alternating-time logics such as ATL* and its variations. It then develops a proof system that allows to prove arbitrary ATL* properties over these infinite-state models. The proof system is shown to be complete relative to validities in the weakest possible assertion language. The paper then derives auxiliary proof rules and verification diagrams techniques and applies them to security protocols, deriving a new formal proof of fairness of a multi-party contract signing protocol where the model of the protocol and of the properties contains both game-theoretic and infinite-state (parameterized) aspects.     

High power GaN‐HEMT SPDT switches for microwave applications

In this article, the design, fabrication, and on‐wafer test of X‐Band and 2–18 GHz wideband high‐power SPDT MMIC switches in AlGaN/GaN technology are presented. The switches have demonstrated state‐of‐the‐art performance and RF fabrication yield better than 65%. Linear and power measurements for different control voltages have been reported and an explanation of the dependence of the power performances on the control voltage is given. In particular, the X‐band switch exhibits a 0.4 dB compression level at 10 GHz when driven by a 38 dBm input signal. The wideband switch shows a compression level of 1 dB at an input drive higher than 38 dBm across the entire bandwidth. © 2009 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2009.     

Preprogramming Floating Time of Liquid Marble

Non-sticking droplets wrapped with fine hydrophobic particles, namely liquid marbles, can be transported both on solid and water pool without an undesired spill of the inner encapsulated liquid. While the stimuli-responsive release of the inner liquid in the target area is proposed, the time-programmed release is not yet achieved. Herein, the hydrophobicity of nanoclay is modulated via a catalyst-free 1,4-conjugate addition reaction to form liquid marbles. This nanoclay liquid marble is robust and stable in air but collapses on the liquid pool with a specific lifetime. The lifetime of the liquid marble can be modulated over seconds to hours scale depending on the selection of chemically modulated wettability of the nanoclay. The critical mechanism of lifetime modulation is responsible for controlling the coalescence kinetics between the water pool and inner liquid by nanoclays’ high diffusion length and chemically varied water spreading potential. The NC liquid marble's programmable lifetime to ‘time-bomb’ type drug release and cascade chemical reaction is applied—without requiring any external intervention.     

Verifying Temporal Properties of Reactive Systems: A STeP Tutorial

We review a number of formal verification techniques supported by STeP, the Stanford Temporal Prover, describing how the tool can be used to verify properties of several versions of the Bakery Mutual exclusion algorithm for mutual exclusion. We verify the classic two-process algorithm and simple variants, as well as an atomic parameterized version. The methods used include deductive verification rules, verification diagrams, automatic invariant generation, and finite-state model checking and abstraction.     

可键控的高频信号发生器的设计

介绍了一种键控式的采用单片机对高频函数发生电路进行程序控制的高频信号发生器的设计方案。此方案能产生方波、正弦波和三角波等信号;采用数字频率合成器,使输出信号频稳度和晶体振荡器的相当;并用键盘设置波形和频率,由LED显示。输出信号的频率分成1 MHz~16 MHz和8 kHz~999 kHz两挡。     

Laser composite surfacing of AISI 304 stainless steel with titanium boride for improved wear resistance

The present study concerns development of a hard in situ boride-dispersed composite layer on the surface of AISI 304 stainless steel substrate to improve the wear resistance property. Laser processing was carried out by melting the surface of sand-blasted AISI 304 stainless steel substrate using a continuous wave CO₂ laser and simultaneous deposition of a mixture of K₂TiF₆ (potassium titanium hexafluoride) and KBF₆ (potassium hexafloroborate) (in the weight ratio of 2:1) using Ar as shrouding environment. Powder feed rate was maintained constant at 4 g/min. Irradiation results in dissociation of a pre-deposited mixture along with a part of the stainless steel substrate, intermixing and rapid solidification to form the composite layer on the surface. The micro-structure of composite layer consists of dispersion of titanium boride particles in AISI 304 stainless steel matrix. Volume fraction of particles is found to be uniform throughout the composite layer, though varied with laser parameters. The micro-hardness of the surface was improved 250–350 VHN as compared to 220 VHN of the AISI 304 stainless steel substrate with a significant improvement in wear resistance property. The mechanism of wear was found to be a combination of adhesive and abrasive in as-received stainless steel. However, it was predominantly abrasive for laser composite surfaced stainless steel.