Characterization and electrochemical properties of CF4 plasma-treated boron-doped diamond surfaces

The effect of CF₄ plasma etching on diamond surfaces, with respect to treatment time, was investigated using scanning electron microscopy (SEM), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), and electrochemical measurements. SEM observations and Raman spectra indicated an increase in surface roughening on a scale of 10–20 nm, and an increase in crystal defect density was apparent with treatment time in the range of 10 s to 30 min. In contrast, alteration of the diamond surface terminations from oxygen to fluorine was found to be rather rapid, with saturation of the F/C atomic ratio estimated from XPS analysis after treatment durations of 1 min and more. The redox kinetics of Fe(CN)₆^3−/4− was also found to be significantly modified after 10 s of CF₄ plasma treatment. This behavior shows that C–F terminations predominantly affect the redox kinetics compared to the effect on the surface roughness and crystal defects. The double-layer capacitance (C_dl) of the electrolyte/CF₄ plasma-treated boron-doped diamond interface was found to show a minimum value at 1 min of treatment. These results indicate that a short-duration CF₄ plasma treatment is effective for the fabrication of fluorine-terminated diamond surfaces without undesirable surface damage.     

High-efficiency finishing process for metal mold by large-area electron beam irradiation

A new finishing process for metal molds by large-area electron beam (EB) irradiation is proposed in this study. In the large-area EB irradiation equipment used here, an EB with high-energy density is irradiated without focusing the beam, and so the EB with a maximum diameter of 60 mm can be used for melting or evaporating metal surface instantly. Experimental results show that the surface roughness decreases from 6 μmRz to less than 1 μmRz in just a few minutes under proper machining conditions. The corrosion resistance of metal mold surface also could be greatly improved by large-area EB irradiation. Furthermore, the surface roughness of tilting surface close to 90° could be well improved. Therefore, large-area EB irradiation method has a possibility to become a high-efficiency finishing process for metal molds.     

The result of a wall failure in-pile experiment under the EAGLE project

The WF (wall failure) test of the EAGLE program, in which 2 kg of uranium dioxide fuel-pins were melted by nuclear heating, was successfully conducted in the IGR (Impulse Graphite Reactor) of NNC/Kazakhstan. In this test, a 3 mm-thick stainless steel (SS) wall structure was placed between fuel pins and a 10 mm-thick sodium-filled channel (sodium gap). During the transient, fuel pins were heated, which led to the formation of a fuel-steel mixture pool. Under the transient nuclear heating condition, the SS wall was strongly heated by the molten pool, leading to wall failure. The time needed for fuel penetration into the sodium-filled gap was very short (less than 1 s after the pool formation). The result suggests that molten core materials formed in hypothetical LMFBR core disruptive accidents have a certain potential to destroy SS-wall boundaries early in the accident phase, thereby providing fuel escape paths from the core region. The early establishment of such fuel escape paths is regarded as a favorable characteristic in eliminating the possibility of severe re-criticality events. A preliminary interpretation on the WF test results is presented in this paper.     

On-Line Shape recognition with incremental training using binary synaptic weights algorithm

Recognition of hand drawn shapes is beneficial in drawing packages and automated sketch entry in handheld computers. In this paper, we propose a new approach to on-line geometric shape recognition with incremental training function, which utilizes a heuristic function to reduce noise and a neural network for classification and on-line training. Instead of recognizing segments of a drawing and then performing syntactical analysis to match with a predefined shape, which is weak in terms of generalization and dealing with noise, we examine the shape as a whole. The main concept of the recognition method is derived from the fact that internal angles are very important in the perceived shape of outlines. Our application's aim is to recognize elliptic, rectangular, and triangular shapes in a way similar to human cognition of these shapes. Human beings recognize such basic shapes regardless of the variations in size, noise on the shape border, rotation and in the case of triangles, regardless of the type of the triangle. The key concept is that the neural network learns the relationships between the internal angles of a shape and its classification, therefore only a few training samples which represent the class of the shape are sufficient. Fast meremental training, which is performed on-line, is accomplished by the use of the Binary Synaptic Weights algorithm, a one pass, feedforward neural network training algorithm. Incremental training offers the advantage of adjusting the recognition capability of the system to the user's drawings. the results are very successful, such that the neural network correctly classified shapes that did not have any resemblance to the shapes in the initial training set.     

Relationship of occupation to blood pressure among middle-aged Japanese men--the significance of the differences in body mass index and alcohol consumption

To clarify how and why blood pressure differs between occupations, the proportions of hypertensives, and the measures of blood pressure, body mass index (BMI) and alcohol consumption among the individuals not taking antihypertensive drugs were compared between the eight occupational categories using the data from a health check-up for 589 middle-aged Japanese males, mostly randomly selected from five areas in Japan. After adjusting for age, the relationships of occupation to the proportion of hypertensives and the mean systolic and diastolic blood pressure substantially differed among the five areas. However, after further adjustment for residence, these blood pressure levels (the proportion of hypertensives, and the mean systolic and diastolic blood pressure) were found to be higher for the "Personnel in transport and communications", the "Clerical personnel", the "Managerial and civil personnel" and the "Professional and technical personnel", whereas these values were consistently lowest in the "Service personnel". Age and residence-adjusted mean BMI was also higher for the four occupational categories with the increased blood pressure levels. According to a weighted multiple regression analysis across the eight occupations, the age and residence-adjusted mean BMI was a significant predictor of the age and residence-adjusted mean systolic and diastolic blood pressure (p = 0.068 and 0.018, respectively). These results suggest that the occupation-related changes in BMI may largely contribute to the occupation-related changes in blood pressure.     

A variational approach to multi-phase motion of gas, liquid and solid based on the level set method

We propose a simple and robust numerical algorithm to deal with multi-phase motion of gas, liquid and solid based on the level set method [S. Osher, J.A. Sethian, Front propagating with curvature-dependent speed: Algorithms based on Hamilton-Jacobi formulation, J. Comput. Phys. 79 (1988) 12; M. Sussman, P. Smereka, S. Osher, A level set approach for capturing solution to incompressible two-phase flow, J. Comput. Phys. 114 (1994) 146; J.A. Sethian, Level Set Methods and Fast Marching Methods, Cambridge University Press, 1999; S. Osher, R. Fedkiw, Level Set Methods and Dynamics Implicit Surface, Applied Mathematical Sciences, vol. 153, Springer, 2003]. In Eulerian framework, to simulate interaction between a moving solid object and an interfacial flow, we need to define at least two functions (level set functions) to distinguish three materials. In such simulations, in general two functions overlap and/or disagree due to numerical errors such as numerical diffusion. In this paper, we resolved the problem using the idea of the active contour model [M. Kass, A. Witkin, D. Terzopoulos, Snakes: active contour models, International Journal of Computer Vision 1 (1988) 321; V. Caselles, R. Kimmel, G. Sapiro, Geodesic active contours, International Journal of Computer Vision 22 (1997) 61; G. Sapiro, Geometric Partial Differential Equations and Image Analysis, Cambridge University Press, 2001; R. Kimmel, Numerical Geometry of Images: Theory, Algorithms, and Applications, Springer-Verlag, 2003] introduced in the field of image processing.     

Buoyancy engine developed for underwater gliders

A buoyancy engine with a swashplate-type axial piston pump was developed. Its oil extrusion and drawing properties under high hydraulic pressure were evaluated. This buoyancy engine is now installed in an underwater glider that will achieve long-term monitoring of ocean environments up to 2100 m depth in a designated area with lower operational costs. This bidirectionally functioning pump can control the amount of oil in extrusion and draw operations. When drawing oil under high pressure, the hydraulic pump and the electric motor, respectively, act as a hydraulic motor and an electric generator. The generated electric power is absorbed by a damping resistor. The oil-drawing and extrusion properties were measured using a large hyperbaric chamber that is able to produce an almost identical environment to that of actual operations. Results confirmed stable oil extrusion operations up to 21 MPa. Regarding oil-drawing properties, although it was measured only up to 10 MPa in the hyperbaric chamber, it can be inferred that the system can draw the oil and can control the buoyancy precisely up to 21 MPa by replacing the two-way ball valve with an electromagnetic latching solenoid valve.     

Compact electrostatic levitator for diffraction measurements with a two axis diffractometer and a laboratory x-ray source

A compact electrostatic levitator was developed for the structural analysis of high-temperature liquids by x-ray diffraction methods. The size of the levitator was 200 mm in diameter and 200 mm in height and can be set up on a two axis diffractometer with a laboratory x-ray source, which is very convenient in performing structural measurements of high-temperature liquids. In particular, since the laboratory x-ray source allows a great amount of user time, preliminary or challenging experiments can be performed with trial and error, which prepares and complements synchrotron x-ray experiments. The present small apparatus also provides the advantage of portability and facility of setting. To demonstrate the capability of this electrostatic levitator, the static structure factors of alumina and silicon samples in their liquid phases were successfully measured.     

Morphological characteristics of flood refugia of cobble-bed vegetation

Periodic flooding alters riverine vegetation community composition; moderate flood disturbance maintains communities at an early seral stage, whereas severe floods may remove entire communities. After disturbance, plants may recolonize riverbeds from refugia.Here, we investigated the morphological characteristics of refugia where riverine plants survived large floods. At three sites, plant communities growing on cobble-bars were surveyed, and the hydraulic characteristics of each site were analyzed. The populations of an indicator plant, Anaphalis margaritacea sub-species yedoensis (Franch. et Savat.) were assessed after major floods in 2004 and 2009. At each survey, the particle size and bed composition were measured, and the critical shear-stress required to move particles at each site was calculated. A one-dimensional flow and the average and local shear-stress at ten different discharges, including that of the largest flood were calculated. The results demonstrate that the A. margaritacea community is maintained at locations where the local shear-stress at peak discharge in large-floods does not exceed a critical value. These conditions were achieved in locations with particular morphological characteristics, where the river is not constrained by levees and is restricted by a downstream narrow-pass; in this reach river width increases with discharge thus limiting the increase in water depth with increasing discharge and allowing the establishment of refugia where plant species may survive large floods.Flooding and reestablishment from refugia maintain a characteristic riverbed community in equilibrium.     

Preparation of β-Fesi2 thin film by metal organic chemical vapor deposition using iron-carbonyl and mono-silane

β-FeSi₂ films were deposited at 750 °C by a supplying Fe(CO)₅ and SiH₄ simultaneously during metal organic chemical vapor deposition (CVD). Films could be deposited using this precursors system, even though film deposition was not ascertained by the single supply of Fe(CO)₅. Fe(CO)₅ was probably decomposed in gas phases before it reached to substrate surface. It was suggested that a kind of intermediate reactant which was more stable than Fe(CO)₅ created by the simultaneous supply of Fe(CO)₅ and SiH₄ makes Fe-Si films. Epitaxial β-FeSi₂ films were obtained on Si(111) substrates, and neither carbide nor oxide phases were detected on XRD patterns.