QoS-Aware Optical Fog-Assisted Cyber-Physical System in the 5G Ready Heterogeneous Network

Wireless Personal Communications - In recent years, the emergence of Internet of things and cyber-physical system provide a proactive and efficacious solution to enable remote monitoring, machine...     

An Exemplar Imidazoline Surfactant for Corrosion Inhibitor Studies: Synthesis,Characterization, and Physicochemical Properties

An optimized one-pot recipe has been developed to synthesize a surfactant molecule, referred to as OMID, consisting of an imidazoline head group and aliphatic tail, which is an exemplar corrosion inhibitor for carbon steel in acidic solutions. As evidenced by gas chromatography, ¹H and ¹³C nuclear magnetic resonance, and Fourier-transform infrared data, a high-purity product was achieved without the use of either a solvent or catalyst. Critical micelle concentration values and corrosion inhibition efficiencies ( η %) were determined in aqueous solutions of hydrochloric acid and sulfuric acid using surface tensiometry and linear polarization resistance measurements, respectively. Hydrolysis of the imidazoline head group as a function of pH (0–11) was explored with ultraviolet–visible absorption spectroscopy. In addition, N 1s and C 1s X-ray photoelectron spectroscopy data were acquired from both surface-adsorbed OMID and a multilayer of the imidazoline head group of OMID. These latter data are highly relevant to those attempting to understand OMID inhibition chemistry.     

Deep autoencoders for feature learning with embeddings for recommendations: a novel recommender system solution

Neural Computing and Applications - We propose “Deep Autoencoders for Feature Learning in Recommender Systems,” a novel discriminative model based on the incorporation of features from...     

Analysis of phosphorus removal and anaerobic selector performance in a full-scale activated sludge process in Singapore.

This paper analyses the performance of the anaerobic selector (A/O process) in a full-scale activated sludge process receiving mostly industrial sewage discharge (> 60%) in Singapore. In addition to the sludge settleability, enhanced biological phosphorus removal (EBPR) was studied. The sludge volume index (SVI) reduced from 200 to 80 ml g(-1) and foaming was suppressed significantly, indicating the effectiveness of the anaerobic selector in improving sludge settleability. The phosphorus removal efficiency was 66%, and 7.5 mg HAc-COD was consumed per mg PO4(3-) -P removed. In the anaerobic compartment, 31% of the SCOD and 73% of the acetic acid in the settled sewage were removed with PO4(3-) -P release of 14.1 mg PO4(3-)-P l(-1). The linear correlation between PO4(3-) -P release in the anaerobic compartment and PO4(3-) -P uptake in the aerobic compartment indicates that there is about 0.8 mg PO4(3-) -P release in the anaerobic compartment per mg PO34(3-) -P uptake in the aerobic compartment. The fates of volatile fatty acids (VFAs) and its short chain acids (SCAs) in the process were studied and discussed.     

A Code Assignment Algorithm for Nonblocking OVSF Codes in WCDMA

OVSF codes are used as channelization codes in WCDMA. Due to code blocking property of OVSF codes, the bandwidth available in the system is severely limited. Code reassignments mitigate the impact of the blocking property at the expense of causing delays and decreasing the throughput of the system. Nonblocking OVSF (NOVSF) codes have been proposed to alleviate the adverse effect of code reassignments. This paper presents a code assignment algorithm for NOVSF codes, which does not require any code reassignments. Simulation results show that NOVSF codes achieve better throughput than OVSF codes, even though code reassignments are allowed in the assignments of OVSF codes.     

Phase behavior,density, and crystallization of polyethylene in n‐pentane and in n‐pentane/CO2 at high pressures

The phase behavior and volumetric properties of polyethylene (PE) in solutions of n‐pentane and n‐pentane/CO₂ were studied in a temperature (T) range of 370–440 K at pressures up to 60 MPa. Measurements were conducted with a variable‐volume view‐cell system equipped with optical sensors to monitor the changes in the transmitted light intensity as the P or the T of the system was changed. Lower‐critical‐solution‐temperature‐type behavior was observed for all of the liquid–liquid (L–L) phase boundaries, which shifted to higher pressures in solutions containing CO₂. The solid–fluid (S–F) phase boundaries were investigated over a P range of 8–54 MPa and took place in a narrow T range, from 374 to 378 K in this P interval. The S–F phase boundary showed a unique feature in that the demixing temperatures showed both increasing and decreasing trends with P depending on the P range. This was observed in both the PE/n‐pentane and PE/n‐pentane/CO₂ mixtures. The density of these solutions were measured as a function of P at selected temperatures or as a function of T at selected pressures that corresponded to the paths followed in approaching the phase boundaries (S–F or L–L) starting from a homogeneous one‐phase condition. The data showed a smooth variation of the overall mixture density along these paths. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 2201–2209, 2003     

Restoration of blood pressure by choline treatment in rats made hypotensive by haemorrhage

1. Intracerebroventricular (i.c.v.) injection of choline (25-150 micrograms) increased blood pressure in rats made acutely hypotensive by haemorrhage. Intraperitoneal administration of choline (60 mg kg-1) also increased blood pressure, but to a lesser extent. Following i.c.v. injection of 25 micrograms or 50 micrograms of choline, heart rate did not change, while 100 micrograms or 150 micrograms i.c.v. choline produced a slight and short lasting bradycardia. Choline (150 micrograms) failed to alter the circulating residual volume of blood in haemorrhaged rats. 2. The pressor response to i.c.v. choline (50 micrograms) in haemorrhaged rats was abolished by pretreatment with mecamylamine (50 micrograms, i.c.v.) but not atropine (10 micrograms, i.c.v.). The pressor response to choline was blocked by pretreatment with hemicholinium-3 (20 micrograms, i.c.v.). 3. The pressor response to i.c.v. choline (150 micrograms) was associated with a several fold increase in plasma levels of vasopressin and adrenaline but not of noradrenaline and plasma renin. 4. The pressor response to i.c.v. choline (150 micrograms) was not altered by bilateral adrenalectomy, but was attenuated by systemic administration of either phentolamine (10 mg kg-1) or the vasopressin antagonist [beta-mercapto-beta,beta-cyclopenta-methylenepropionyl1, O-Me-Tyr2,Arg8]-vasopressin (10 micrograms kg-1). 5. It is concluded that the precursor of acetylcholine, choline, can increase and restore blood pressure in acutely haemorrhaged rats by increasing central cholinergic neurotransmission. Nicotinic receptor activation and an increase in plasma vasopressin and adrenaline level appear to be involved in this effect of choline.     

BATCH SEQUENCING

Consider the single machine scheduling problem where there are a number of part types to be processed. A part type is defined as follows: Two parts are of the same part type if the machine does not require a setup in between the processing of these parts. The problem investigated in this paper is to find a sequence of batches of parts (if there are any) where all the requirements for parts are met. A heuristic and an exact algorithm are developed, and computational analysis is performed to measure the performance of the heuristic. The time complexity function of the heuristic is O(n²), and the exact algorithm runs in polynomial time given a fixed upper bound on the number of setups.     

Morphological changes in poly(?-caprolactone) in dense carbon dioxide

Morphological changes that take place in poly(?-caprolactone) upon exposure to carbon dioxide at high pressures have been explored as a function of pressure and temperature. SEM and DSC results point to a competition between CO₂-modulated crystallization and pressure-induced phase separation which leads to unique morphologies. At 293 K, exposure to CO₂ at pressures up to 45 MPa leads to recrystallization resulting in higher level of crystallinity and higher melting temperatures. Highest crystallinity levels along with distinct crystal morphology were observed after exposure to CO₂ at 308 K and 21 MPa. At a higher pressure at this temperature (308 K/34 MPa) polymer undergoes melting, and foaming is achieved during depressurization prior to solidification. At 323 K, the polymer is found to display unique crystal morphology with concave crystal geometry as well as porous domains. The results are discussed in terms of the crystallization and phase separation paths that are followed during exposure to CO₂ and the depressurization stages.     

Solubility of polyethylene in n-pentane at high pressures

The high pressure solubility of polyethylene standards (M_w = 2100, 16400, 108000 and 420000 and M_w/M_n = 1.14, 1.16, 1.32 and 2.66, respectively) in n-pentane has been studied. Concentrations of up to 15 wt% polymer have been investigated. For each polymer sample and concentration, pressures that are required to achieve single-phase solutions have been determined over a range of temperatures. The solutions are found to all show lower critical solution temperatures. Demixing pressures are observed to depend strongly on the molecular weight of the polymer.