Novel method for simultaneous formation of wires and vias of a printed circuit board using nanoporous body

A new type of a flexible printed circuit board with landless vias is developed using a novel method called interconnection via nanoporous structure (INPS). This method can make wires and vias of the printed circuit board simultaneously by a single photo-exposure process. A new photo-induced selective plating method was used to impregnate a nanoporous substrate with copper, and a new photomask was designed, which constitutes of a completely vacant large hole for via and aggregation patterns of very fine holes for wire. Because of the simple process, the INPS board is characterized by landless vias and very fine circuit. Owing to the structure, it is also characterized by flexibility and detachable wires.     

Laser Induced Periodic Structures on Polymer Surfaces

Subhalf micron (0.2 nm) space and amplitude linear periodic structures and an array of dot images are obtained with the Nd:YAG laser irradiation on Kapton polyimide films, poly(ethylene terephthalate) films, spin-coated polyimide films and others. Different from the excimer laser irradiation, which requires a polarizer, our solid state Nd:YAG laser source provides polarized beams without a polarizer with advantage over excimer laser irradiation. AFM and SEM studies have been carried out. XPS studies of laser exposed areas indicate no significant chemical reactions took place on exposed areas.     

Field-induced spin density waves in Bechgaard salts in the presence of normal impurities

We study theoretically the effect of the quasiparticle scattering in field-induced spin density waves (FISDW) in Bechgaard salts in a high magnetic field. The effects of scattering are introduced by a random impurity model similar to the one used by Zittartz in his analysis of the charge density wave. Within the single-gap approximation and weak impurity scattering, we find that the FISDW with normal impurities is similar to a superconductor with magnetic impurities. From this analogy the thermodynamics as well as the electronic thermal conductivity and the sound attenuation coefficient of the FISDW are obtained.On leave of absence from Nankai University, China.     

Bryostatin 1 induces ubiquitin COOH-terminal hydrolase in acute lymphoblastic leukemia cells

It has been previously reported that Bryostatin 1 (Bryo1) induces differentiation of the human acute lymphoblastic leukemia (ALL) cell line, Reh, to a monocytoid B-cell stage. In this study we demonstrate that a novel protein, ubiquitin COOH-terminal hydrolase (UCH-L1), is associated with this differentiation. Reh cells were treated with 200 nmol/l of Bryo1 for 72 h and analyzed for changes in morphology, surface immunophenotype, acid phosphatase and terminal deoxynucleotidyl transferase. Protein patterns of the parent and differentiated cells, by two-dimensional polyacrylamide gel electrophoresis (2D PAGE), were studied. Bryo1-treated cells expressed morphologic, phenotypic and enzymatic features of the monocytoid B-cell stage. The UCH-L1 enzyme (MW-pl 34-5.3) was detected by 2 D PAGE in the differentiated, but not in parent cells. The presence of UCH-L1 in the Bryo1-treated cells was further confirmed by immunoblotting of 2 D PAGE using UCH-L1 polyclonal antibody. Ubiquitin expression was studied in parent and Bryo1-treated cells and was compared with 12-O-tetradecanoylphorbol-13-acetate (TPA)-treated cells. Both agents, TPA and Bryo1, increased the level of ubiquitin expression as detected by flow cytometry. Sodium borohydride, an inhibitor of UCH-L1, inhibited the Bryo1-induced differentiating effect on Reh cells. To date, the mechanism by which Bryo1, exerts its B-cell differentiating effect is not fully understood. This study shows that UCH-L1 expression may play a major role in Bryo1-induced differentiation in pre-B-ALL.     

The blocking barrier effect on aluminum electromigration due totitanium layers in multilayered interconnects of LSI's

Experimental evidence of an increase in the resistance of a cathode-side metal line without any void generation is presented for a multilayered metal structure terminated by via-holes during electromigration tests. This resistance increase is reversed to the initial value by high temperature storage after electromigration testing. The increase in the resistance of multilayered metal structures is attributed to the vacancy accumulation in the cathode side due to the blocking barrier effect of the refractory metal layer in the via-hole     

A 3-V, 2%-mW multibit current-mode ΣΔ DAC with 100 dBdynamic range

The area ratio of analog to digital for mixed-mode chip has been inversely proportional to the process design rule for a given dynamic range objective, in contradiction to the LSI trend. This paper presents a design approach to realize a high degree of size reduction with process design rules for analog circuitry and a signal processing architecture for digital circuitry. A five-level current-mode ΣΔ digital-to-analog converter (DAC) system reveals full scale total harmonic: distortion plus noise (THD+N) of -90 dB and dynamic-range of 100 dB at 3 V (low power of 22 mW). Analog-area down-scaling can be accomplished by this architecture to be 1.09 mm², using 0.6-μm double-poly double-metal (DPDM) CMOS. For the digital filter, a pipeline instruction sequence with multiplierless architecture also gives small area of 1.98 mm²     

Strengths and ductility of Mo–TiC alloys after secondary recrystallization

A series of Mo–TiC alloys were heated in vacuum at 2473 K for 36 ks. First grain growth behavior was observed using a scanning electron microscope. Then effects of TiC addition on the strengths and ductility at low temperature were discussed from the viewpoints of chemical composition and grain structure.

Materials with TiC additions of not larger than 0.1% demonstrated a single-crystalline grain structure. Both yield and maximum strengths increased by TiC addition and consequently ductility was improved.     

Frequency measurements of 9- and 10-μm N2O lasertransitions

We have measured frequencies of N₂O transitions by heterodyning sub-Doppler fluorescence-stabilized N₂O laser radiation with that from a reference CO₂ laser. A high-resolution cavity incorporates a ribbed tube and a highly reflective grating, permitting the CW oscillation of both the 10⁰ 0-02⁰0 9-μm and the 10⁰0-00⁰1 10-μm regular bands. This is the first sub-Doppler frequency measurement of the 9-μm band. The accuracy in the determination of the rotational constants for both bands has been improved by an order of magnitude, and calculated transition frequencies are presented     

A monocyte chemotactic factor, S19 ribosomal protein dimer, in phagocytic clearance of apoptotic cells

HL-60 cells derived from a human promyelocytic leukemia underwent apoptosis by heat treatment. When the heat-treated HL-60 cells were injected into guinea pig skin, monocyte/macrophage infiltration was observed 24 or 36 hours later, and the apoptotic cells were phagocytically cleared by 48 hours after their injection. The infiltration and clearance patterns were quite different from those observed in injection of necrotic or boil-fixed HL-60 cells. The apoptotic cells released a monocyte chemotactic factor in vitro 24 hours after the heat treatment. The chemotactic factor generated was identified as the cross-linked homodimer of S19 ribosomal protein by its immunologic and physicochemical properties. A serine protease that inactivates the monocyte chemotactic factor was also released from the apoptotic cells 30 hours after the heat treatment. A super infusion of this protease into the skin where the apoptotic cells had been injected diminished the number of infiltrated monocytes. The present results indicate an important role of the S19 ribosomal protein dimer in the phagocytic clearance of apoptotic cells.