In situ observation of synthesized nanoparticles in ultra-dilute aerosols via X-ray scattering

In-air epitaxy of nanostructures (Aerotaxy) has recently emerged as a viable route for fast, large-scale production. In this study, we use small-angle X-ray scattering to perform direct in-flight characterizations of the first step of this process, i.e., the engineered formation of Au and Pt aerosol nanoparticles by spark generation in a flow of N₂ gas. This represents a particular challenge for characterization because the particle density can be extremely low in controlled production. The particles produced are examined during production at operational pressures close to atmospheric conditions and exhibit a lognormal size distribution ranging from 5–100 nm. The Au and Pt particle production and detection are compared. We observe and characterize the nanoparticles at different stages of synthesis and extract the corresponding dominant physical properties, including the average particle diameter and sphericity, as influenced by particle sintering and the presence of aggregates. We observe highly sorted and sintered spherical Au nanoparticles at ultra-dilute concentrations (< 5 × 10⁵ particles/cm³) corresponding to a volume fraction below 3 × 10^–10, which is orders of magnitude below that of previously measured aerosols. We independently confirm an average particle radius of 25 nm via Guinier and Kratky plot analysis. Our study indicates that with high-intensity synchrotron beams and careful consideration of background removal, size and shape information can be obtained for extremely low particle concentrations with industrially relevant narrow size distributions.

     

Greater task difficulty amplifies the facilitatory effect of des-glycinamide arginine vasopressin on appetitively motivated learning.

39 3–6 mo old male Long-Evans rats were trained in a discrete-trial forward autoshaping paradigm to touch an extended lever to earn food pellets. Reinforcement was delivered either simultaneously with or 6 sec after lever retraction, which occurred either noncontingently after 15 sec or when the Ss touched the lever. Treatment with subcutaneous des-glycinamide arginine vasopressin (DGAVP [15 μg/kg]) 1 hr before sessions increased the rate of acquisition of the extended-lever-touch response and also facilitated development of intertrial (adjunctive) nose poking. The effects of the peptide were more robust in the more difficult delayed reinforcement task. Results are consistent with previous findings that DGAVP lacks the classical peripheral activity of vasopressin. In both experiments, peptide treatment was terminated before asymptotic levels of performance were attained; the continued facilitation of acquisition in treated groups suggests a specific enhancement of learning and/or enhanced memory retrieval. (22 ref) (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Observing Inequality: Can Ergonomic Observations Help Interventions Transform the Role of Gender in Work Activity?

Computer Supported Cooperative Work (CSCW) - Work activity ergonomics (sometimes called francophone ergonomics) draws heavily on observation in order to support transformation of work to arrive at...     

When is light work heavy? Components of the physical workload of sewing machine operators working at piecework rates

Epidemiologists have associated the job of sewing machine operators with a high incidence of musculoskeletal and other health problems, despite its classifications as light work according to energy expenditure criteria. An ergonomic analysis was undertaken in a trouser factory in order to describe components of the physical load of this work: force exerted, repetitions, time allocation and postures. Work activity of ten operators was observed and timed in situ, and forces were measured with a dynamometer. The time required to sew one seam is very short, 10-15 s per trouser leg. This short cycle is repeated more than 1500 times during the work day, involving quasi-continuous movements of the same parts of the body. The fact that movements are repeated so many times means that small details of the task assume a great importance. During the work day, a substantial force is exerted, only part of which can be measured with current technology. By these measurements, operators lift an average 406.1 kg of trousers per day and exert an average total force of 2858.4 kg with the upper limbs and 24 267.9 kg with the lower limbs. The work posture is static: seated with upper back curved and head bent over the sewing machine. Movements of the upper limbs involve abduction and adduction of the shoulders while exerting a force. For the same task, there is considerable variation in the dimensions of workstations. Interviews were conducted to determine the types of musculoskeletal complaints. The components of work activity could be treated to these complaints and to existing epidemiological data on musculoskeletal problems among sewing machine operators. This type of detailed examination can be applied by health and safety personnel to identify task components which could be changed to minimize the probability of musculoskeletal problems.     

Indicators for choosing an optimal mix of major working postures

North American workers usually stand while working, and prolonged standing is associated with discomfort and cardiovascular problems. Since prolonged sitting is also associated with health problems, and standing postures differ as to mobility and access to seating, it is desirable to identify an optimal mix of postures. As a step towards this identification, it is desirable to develop indicators of potential health effects that respond to changes in work requirements. We observed 65 subjects who usually stood at work, in four types of workplaces. Pressure-pain threshold (PPT) recorded on the plantar surface was used as an indicator of discomfort and arterial blood pressure was used as an indicator of cardiovascular effects. PPT after work was significantly lower than that before work. Sitting for even a small part of the day appeared to be protective. The effects of static vs. dynamic work on PPT and arterial blood pressure may differ.     

Ceramic Powder Synthesis by Spray Pyrolysis

A variety of spray pyrolysis (SP) techniques have been developed to directly produce ceramic powders from solutions. This paper reviews the current status of these processes in terms of the process parameters that enable the formation of particles with controlled morphology and composition. A model incorporating solute diffusion in the droplet and solvent evaporation from the droplet surface is presented to establish the critical parameters leading to solid particle formation. The model illustrates that solid particles can be obtained if solutes with high solubility and a large difference between the critical supersaturation and equilibrium concentration are used and if the process is designed to avoid solvent boiling. It is demonstrated that mixed metal oxide, non-oxide, and composite particles that are solid, hollow, porous, or fibrous can be produced by modifying the precursor characteristics, solution properties, and process parameters. The physical and chemical flexibility of SP processes offers numerous opportunities for the controlled synthesis of advanced ceramic powders and films. However, production rates are limited by the need to produce < 5-μm-diameter droplets and to avoid subsequent droplet coagulation. Developments in process controls, atomization, and system design are required for wider commercialization of SP-type processes.     

Exploiting nonacoustic sensors for speech encoding

The intelligibility of speech transmitted through low-rate coders is severely degraded when high levels of acoustic noise are present in the acoustic environment. Recent advances in nonacoustic sensors, including microwave radar, skin vibration, and bone conduction sensors, provide the exciting possibility of both glottal excitation and, more generally, vocal tract measurements that are relatively immune to acoustic disturbances and can supplement the acoustic speech waveform. We are currently investigating methods of combining the output of these sensors for use in low-rate encoding according to their capability in representing specific speech characteristics in different frequency bands. Nonacoustic sensors have the ability to reveal certain speech attributes lost in the noisy acoustic signal; for example, low-energy consonant voice bars, nasality, and glottalized excitation. By fusing nonacoustic low-frequency and pitch content with acoustic-microphone content, we have achieved significant intelligibility performance gains using the DRT across a variety of environments over the government standard 2400-bps MELPe coder. By fusing quantized high-band 4-to-8-kHz speech, requiring only an additional 116 bps, we obtain further DRT performance gains by exploiting the ear's insensitivity to fine spectral detail in this frequency region.     

Dielectric and electromechanical properties of barium titanate single crystals grown by templated grain growth

Single crystals of BaTiO(3) were grown by templated grain growth (TGG). TGG involves contacting a single crystal "template" to a sintered polycrystalline matrix, then heating the assemblage to a temperature that promotes the migration of the single crystal boundary through the matrix. In this investigation the properties of millimeter-sized, plate-shaped and bar-shaped, single crystals of BaTiO(3) grown by TGG were examined in order to compare the results to single crystals grown by conventional methods. A dielectric constant, epsilon(33)(T)/epsilon(0), of 260, polarizations of P(R)~16 muC/cm(2) and P(sat)~21.5 muC/cm(2), electromechanical coupling coefficients of k(33)~0.51 and k(31)~0.18, and a piezoelectric coefficient of d(33)~140 pC/N were achieved. Entrapped porosity in the crystals made fully poling the crystals difficult.     

Processing parameter effects on the reaction bonding of aluminum oxide process*

The reaction bonding of aluminum oxide (RBAO) process was analyzed from the milling of the precursor mixtures to the sintering of the reaction bonded -alumina as a function of precursor powder composition, Al particle size, temperature, and heating rate. The RBAO process involves both solid-gas (T < T_M,AI) and liquid-gas (T > T_M,AI) oxidation of Al + -Al₂O₃ powder compacts. It has been demonstrated that maximum Al content of the precursor powder is limited to 60 vol %. In addition, it was observed that the initial Al particle size affects the oxidation behavior significantly and hence final properties of -Al₂O₃ compacts. Therefore, the initial Al particle size is very critical for the RBAO process. The critical Al particle size (i.e., the largest Al particle size can be used to obtain dense ceramic materials by the RBAO process) was determined as 1.5 m. It has been demonstrated that heating rate can be used to improve the final microstructures of RBAO ceramics. Although there is no large (>4 vol %) amount of ZrO₂ addition, alpha aluminum oxide ceramics with 97% TD have been produced by optimizing the processing parameters such as fine (<1.5 m) Al particles and slower heating rate during the liquid-gas oxidation.     

A clinical technique for temporization of teeth to receive porcelain laminate veneers

Temporization of teeth prepared for porcelain laminate veneers is sometimes necessary to preserve occlusal relationships, prevent sensitivity or maintain esthetics. The literature describes several techniques which satisfy different requirements for temporization. A modified technique is presented that satisfies at once: occlusion, sensitivity and esthetic needs. Clinical time spent with the patient is minimized by fabricating a matrix on a diagnostic cast prior to the preparation/ impression appointment.