Reactor design considerations for MOCVD growth of thin films

Metal-organic chemical vapor deposition (MOCVD) performance is optimized for growing titanium dioxide (TiO₂) thin films. Different gas flow directions and susceptor rotation, along with reactor geometry and shape variations are considered. Gravity proves to be an important parameter in changing the flow pattern in the reaction chamber. However, since film uniformity is not improved by changing the flow direction, modifying the reactor geometry is also proposed. Among the different geometrical parameters, the susceptor-inlet distance, inlet tube diameter, and susceptor size are considered. To minimize the occurrence of recirculation cells in the reaction chamber, modifications in the reactor shape are also suggested. Acceptable results are achieved by changing the cylindrical reactor to a diamond shape     

Allelopathic Effects of Volatile Monoterpenoids Produced by <Emphasis Type="Italic">Salvia leucophylla</Emphasis>: Inhibition of Cell Proliferation and DNA Synthesis in the Root Apical Meristem of <Emphasis Type="Italic">Brassica campestris</Emphasis> Seedlings

Salvia leucophylla, a shrub observed in coastal south California, produces several volatile monoterpenoids (camphor, 1,8-cineole, -pinene, -pinene, and camphene) that potentially act as allelochemicals. The effects of these were examined using Brassica campestris as the test plant. Camphor, 1,8-cineole, and -pinene inhibited germination of B. campestris seeds at high concentrations, whereas -pinene and camphene did not. Root growth was inhibited by all five monoterpenoids in a dose-dependent manner, but hypocotyl growth was largely unaffected. The monoterpenoids did not alter the sizes of matured cells in either hypocotyls or roots, indicating that cell expansion is relatively insensitive to these compounds. They did not decrease the mitotic index in the shoot apical region, but specifically lowered mitotic index in the root apical meristem. Moreover, morphological and biochemical analyses on the incorporation of 5-bromo-2-deoxyuridine into DNA demonstrated that the monoterpenoids inhibit both cell-nuclear and organelle DNA synthesis in the root apical meristem. These results suggest that the monoterpenoids produced by S. leucophylla could interfere with the growth of other plants in its vicinity through inhibition of cell proliferation in the root apical meristem.     

Finger Braille teaching system-teaching of prosody of finger Braille

Finger Braille is one of tactual communication media of deaf-blind people. Deaf-blind people who are skilled in Finger Braille can catch up with speech conversation, because of prosody of Finger Braille. Features of prosody are： （1） characters at the end of clauses are dotted long; （2） characters of voiced sounds and double consonants are dotted shortly. In this paper, we designed three teaching patterns which taught prosody of Finger Braille （dot conditions about duration of dotting）. Teaching pattern 1 indicated a dot pattern with colored solid background. Teaching pattern 2 indicated a dot pattern with colored empty background. Teaching pattern 3 indicated a dot pattern with colored arrow （long or short）. Every teaching pattern includes 6 colors （red, orange, yellow, green, blue and purple）. In the questionnaire, the yellow pattern of teaching pattern 3 was selected as the most visible pattern. In the evaluation experiment, the yellow pattern of teaching pattern 3, the red and purple patterns of teaching pattern 1 （the least visible pattern） and the existing patterns without teaching of dot conditions are compared. As a result, every subject could dot long at the end of clauses and could dot shortly at the voiced sounds and double consonants. The answers of questionnaire indicated that the yellow pattern of teaching pattern 3 was also the most visible and easiest teaching pattern.     

Wave propagation in functionally graded nanocomposites reinforced with carbon nanotubes based on second-order shear deformation theory

In the present article, as a first endeavor, the wave propagation in functionally graded nanocomposites reinforced with carbon nanotubes is investigated on the basis of second-order shear deformation theory. Four different types of functionally graded nanocomposites are presented. An analytical method is used to find the circular frequencies and phase velocities. To show the accuracy of the present methodology, our results for the free vibration are compared with the results of functionally graded plates available in the literature. The influences of different parameters are also investigated on the circular frequencies and phase velocities.     

A new MLPG method for elastostatic problems

This paper introduces a novel meshless local Petrov-Galerkin (MLPG) method by presenting a new test function as a schema to solve the elasto-static problems. It is seen that the four ordinary MLPG methods can also be approached using the present test function. Both the moving least square (MLS) and the direct method have been applied to the method to estimate the shape function and to impose the essential boundary conditions. The results of three studied elasto-static cases; “two dimensional cantilever beam”, “first mode fracture of a center-cracked strip” and “edge-cracked functionally graded strip” show that by using less number of nodes, the present work gives sufficiently more accurate results. Meanwhile the method can also unify various kinds of MPLGs and one may conclude that the model is a good replacement for other common approaches.     

Thermal degradation characteristic of Tetra Pak panel boards under inert atmosphere

hermal degradation characteristics of Tetra Pak panel boards (TPPB) can be useful to improve usage of such panels as an alternative to wood-based products such as plywood, fiberboard, and particleboard. In the study, samples from the TPBBs manufactured from waste Tetra Pak packages (WTPP) were heated in a nitrogen atmosphere at different heating rates (10, 15 and 20 °C/min) using a thermal analysis system. The Coats-Redfern kinetic model was applied to calculate kinetic parameters. The degradation rate equations were then established. In addition, the kinetic compensation effect (KCE) was used to correlate the pre-exponential factor (k _o ) with activation energy (E _a ) and the existence of the KCE was accepted. TG-FT/IR analyses were applied to the TPPB degradation and then the FT-IR stack plot was used to analyze gas products (CO₂, CH₄, HCOOH, and CH₃OH). Infrared vibrational frequencies and the micro, crystal structure of the TPPBs were investigated by Fourier transform infrared spectroscopy (FT-IR), Scanning electron microscope (SEM) and X-Ray diffraction analysis (XRD), respectively.     

Simple evaluation of aortic arch calcification by chest radiography in hemodialysis patients

Vascular calcification is associated with a poor prognosis in dialysis patients. It can be assessed with computed tomography but simple inoffice techniques may provide useful information. We compared the results obtained with a simple noninvasive technique with those obtained using multidetector computed tomography for aortic arch calcification volume (AoACV) in chronic hemodialysis (HD) patients. The enrolled study subjects were 63 (32 men and 31 women) maintenance HD patients. Calcification of the aortic arch was semiquantitatively estimated with a AoAC score (AoACS) on plain chest radiology. The AoACV was increased, with a mean value of 6.6 ranging from 0% to 36.5%. The coefficient of intraobserver variation was less than 2.5%. Aortic arch calcification score was highly correlated with AoACV (r=0.635, P<0.001). Multiple regression analysis showed age (F value=12.62, P<0.001) and pulse pressure (F value=4.54, P=0.037) to be significant independent determinants of AoACS. In conclusion, a simple measurement of AoACS may be useful for inoffice imaging to choose a therapeutic regimen in HD patients.     

Production of vitamin B12 in genetically engineered Propionibacterium freudenreichii

Since the chemical synthesis of vitamin B12 requires more than 70 steps, the production of vitamin B12 has been achieved by microorganism fermentation with additional brief chemical modifications. In an effort to increase the productivity of vitamin B12, we tried to express 10 genes belonging to the hem, cob and cbi gene families involved in the synthesis of vitamin B12 in Propionibacterium freudenreichii, which is a known producer of vitamin B12. In a recombinant P. freudenreichii clone that harbored the expression vector containing a cobA, cbiLF, or cbiEGH, we obtained an increase in vitamin B12 production of 1.7-, 1.9-, and 1.5-fold higher, respectively, than that in the microorganism without any cloned genes in the expression vector pPK705. The cobU and cobS genes caused a slight increase in the production of vitamin B12. Furthermore, we achieved multigene expression in P. freudenreichii. In a recombinant P. freudenreichii clone that harbored an exogenous gene, hemA, from Rhodobacter sphaeroides and endogenous hemB and cobA genes, we successfully achieved the production of about 1.7 mg/l vitamin B12, 2.2-fold higher than that produced by P. freudenreichii harboring pPK705.     

Equilibrium,kinetic and thermodynamic study of removal of reactive orange 12 on platinum nanoparticle loaded on activated carbon as novel adsorbent

The proposed research describes the synthesis and characterization of platinum nanoparticles loaded on activated carbon (Pt-NP-AC) and its efficient application as novel adsorbent for efficient removal of reactive orange 12 (RO-12). The influences of effective parameters following the optimization of variables on removal percentages, their value was set as 0.015 g Pt-NP-AC, pH 1, contact time of 13 min. At optimum values of all variables at 25 and 50 mgL⁻¹ of RO-12 enthalpy (ΔH⁰) and entropy (ΔS⁰) changes was found to be 59.89 and 225.076, respectively, which negative value of ΔG⁰ shows a spontaneous nature, and the positive values of ΔH⁰ and ΔS⁰ indicate the endothermic nature and adsorption organized of dye molecule on the adsorbent surface. Experimental data was fitted to different kinetic models including first-order, pseudo-second-order, Elovich and intra-particle diffusion models, and it was seen that the adsorption process follows pseudo-second-order model in consideration to intra-particle diffusion mechanism. At optimum values of all variables, the adsorption process follows the second-order kinetic and Langmuir isotherm model with adsorption capacity 285.143 mg g⁻¹ at room temperature.     

Termite Resistance of MDF Panels Treated with Various Boron Compounds

In this study, the effects of various boron compounds on the termite resistance of MDF panels were evaluated. Either borax (BX), boric acid (BA), zinc borate (ZB), or sodium perborate tetrahydrate (SPT) were added to urea-formaldehyde (UF) resin at target contents of 1%, 1.5%, 2% and 2.5% based on dry fiber weight. The panels were then manufactured using 12% urea-formaldehyde resin and 1% NH₄Cl. MDF samples from the panels were tested against the subterranean termites, Coptotermes formosanus Shiraki. Laboratory termite resistance tests showed that all samples containing boron compounds had greater resistance against termite attack compared to untreated MDF samples. At the second and third weeks of exposure, nearly 100% termite mortalities were recorded in all boron compound treated samples. The highest termite mortalities were determined in the samples with either BA or BX. Also, it was found that SPT showed notable performance on the termite mortality. As chemical loadings increased, termite mortalities increased, and at the same time the weight losses of the samples decreased.