Low temperature densification by lithium co-doping and its effect on ionic conductivity of samarium doped ceria electrolyte

Low temperature densification and improving the ionic conductivity of doped ceria electrolyte is important for the realization of efficient intermediate temperature solid oxide fuel cell system. Herein, we report the effect of lithium co-doping (1, 3, 5 and 7?mol%) in 20?mol% samarium doped ceria on the low temperature sinterability and conductivity. The synthesized nanoparticles by citrate-nitrate combustion method showed a decrease in lattice parameter and increase in oxygen vacancy with lithium content after calcination due to the substitution of Li⁺ into CeO₂ lattice. Upon sintering at 900?°C, the density improved and reached a maximum value of 98.6% for 5% Li which exhibited a dense microstructure than at 7% Li. 5%Li co-doping exhibited the best conductivity of 3.65?×?10^?04–1.81?×?10^?3 S?cm^?1 in the operative temperature range of IT-SOFC (550–700?°C).Our results demonstrate the significance of lithium as co-dopant for efficient low temperature sintering as well as improving the electrolyte conductivity.     

A Real-Time Application of Modified Inductor Coupled KY Converter Topology in Speed Control of E-Bikes

Abstract

Congested road network and traffic jam lead to vehicle idling and fuel wastage. An E-bike which is a solution to this is often available with Thumb Throttle Mechanism and single speed operation. A motor controller with multiple output voltage levels and Click Throttle Mechanism is presented in this paper which provides variable speed operation, better power utilization and is highly economical. Proposed modified KY converter utilizes the turns ratio of an On-Line Tap Changer (OLTC) to generate multiple output voltages for variable speed commutation. This possess a stable continuous conduction mode throughout its operation and reduced switching transients when compared to the existing topologies. Mutually independent control variables namely turns ratio and duty ratio, are used here for voltage conversion, which facilitates the flexible transition between multiple output voltage levels. A 15?W prototype of the proposed modified inductor coupled KY converter is realized using Arduino Uno Board.     

2-Aminobenzothiazole as an efficient corrosion inhibitor of AA6061-T6 in 0.5 M HCl medium: electrochemical,surface morphological,and theoretical study

Journal of Applied Electrochemistry - The inhibitive action of 2-aminobenzothiazole (ABT) on the corrosion of AA6061-T6 was evaluated in 0.5 M HCl by electrochemical techniques. The...     

Room temperature efficacious synthesis of diphenylmethane over Fe/Al-MCM-41 catalysts

Fe/Al-MCM-41 (Si/Al = 25, 50, 75 and 100) were synthesized. Their catalytic activity was evaluated towards benzylation of benzene with benzyl chloride in liquid phase. The catalytic activity of Fe/Al-MCM-41(25) was higher than the other catalysts. Diphenylmethane(DPM) was obtained as the major product with 100% selectivity and with 100% conversion of benzyl chloride under optimum condition. The effect of temperature and the feed ratio, on the activity of Fe/Al-MCM-41(25) and selectivity towards DPM was studied and a possible reaction mechanism was proposed.     

Photocatalytic hydrogen production using Fe2O3-based core shell nano particles with ZnS and CdS

Stability and efficiency of photocatalysts are important to realize the practical applications of them for photocatalytic hydrogen production from industrial sulfide effluent. Novel, magnetically separable core–shell nano photocatalysts viz., CdS/Fe₂O₃, ZnS/Fe₂O₃ and (CdS + ZnS)/Fe₂O₃ were prepared and their hydrogen evolution activity under visible light was examined. The XRD result shows that CdS and ZnS were very well coated on the surface of the iron oxide core shell particles. The HR-TEM result also confirms the core shell formation. (CdS + ZnS)/Fe₂O₃ evolved higher volume of hydrogen than the other catalysts. It is ascribed to rapid migration of excited electrons from (CdS + ZnS) toward Fe₂O₃ suppressing electron hole annihilation compared to other catalysts. The catalysts can be easily recovered from the reaction medium using external magnetic bar and so the photocatalyst can be reused without any mass loss. Hence, it can be a potential catalyst for recovery of hydrogen from industrial sulfide containing waste streams.     

Palladium‐nanoparticle intercalated vermiculite for selective hydrogenation of α,β‐unsaturated aldehydes

Palladium nanoparticles were generated in the interlamellar region of swelling 2:1 type vermiculite clay using an adsorption excess isotherm. An adsorption excess isotherm was constructed for vermiculite after exchanging the exchangeable Na⁺ ions in the interlamellar region using a binary liquid mixture (ethanol:toluene). Based on adsorption excess isotherm, 1% w/w palladium was intercalated into the interlamellar space of vermiculite. The Pd‐intercalated vermiculite was characterized by X‐ray diffraction, transmission electron microscopy and atomic absorption spectroscopy. The 1% w/w Pd‐intercalated vermiculite was tested for its catalytic activity towards selective hydrogenation reactions involving some α,β‐unsaturated carbonyl compounds using a pulse reactor and its catalytic activity was compared with commercial 1% Pd/C. The intercalated catalyst was found to be very selective towards the desired product of unsaturated alcohols. Copyright © 2007 Society of Chemical Industry     

Boron-containing bioactive glasses in bone and soft tissue engineering

Boron is considered to influence the performance of several metabolic enzymes and boron deficiency is associated with impaired growth and abnormal bone development. As such, boron is a beneficial bioactive element for animals and humans. It is also well known that boron stimulates wound healing and improves bone health. The addition of boron in different proportions to bioactive glasses has significant effects on glass structure, glass processing parameters, biodegradability, biocompatibility, bioactivity and cytotoxicity. Different compositions of bioactive glasses (BGs) containing boron, including boron-doped, borosilicate and borate glasses, are being investigated for bone and soft tissue engineering under the premise that these BGs are suitable carriers of boron, indicating controlled release of B species in the biological environment. This paper reviews up to date research and applications of borate, borosilicate, and boron doped silicate and phosphate BGs focussing on their physical, structural, degradation and biological properties for hard and soft tissue regeneration.     

CTAB-templated formation of CuCo2O4/CuO nanorods and nanosheets for high-performance supercapacitor applications

Journal of Materials Science: Materials in Electronics - In the present work, Copper cobaltites (CuCo2O4) were efficiently developed by the CTAB-assisted sonochemical process succeeded by...