Bounded disorder file organization

The bounded disorder file organization proposed by W. Litwin and D.B. Lomet (1987) uses a combination of hashing and tree indexing. Lomet provided an approximate analysis with the mention of the difficulty involved in exact modeling of data nodes, which motivated this work. In an earlier paper (M.V. Ramakrishna and P. Mukhopadhyay, 1988) we provided an exact model and analysis of the data nodes, which is based on the solution of a classical sequential occupancy problem. After summarizing the analysis of data nodes, an alternate file growth method based on repeated trials using universal hashing is proposed and analyzed. We conclude that the alternate file growth method provides simplicity and significant improvement in storage utilization     

MEETING THE IT CHALLENGES OF BUSINESS The Changing Mandate for MBAs

What is the implication for business when information technology (IT) changes in the workplace without a commensurate change in the composition of business programs educating tomorrow's employees? A survey of MBA graduates forms the basis of this article on the IT skills needed in the marketplace.     

Surface characterization of sprayed CuGa x In1−x Se2 layers

Small-area polycrystalline CuGa _x In_1–x Se₂-based solar cells produced in the laboratory have been reported with efficiencies up to 18.8%. This success at achieving high-efficiency devices has stimulated a parallel research effort to produce large-area modules based on the use of CuGa _x In_1–x Se₂ with reduced cost of production. One method that has potential to achieve these objectives is chemical spray pyrolysis. Preliminary studies have resulted in devices with efficiencies of 4–5%. Further improvements toward implementing higher-efficiency devices are expected to result from a better understanding of the physical and chemical properties of the chalcopyrite layers produced. In this work we have investigated, for the first time, the properties of these layers using X-ray photoelectron spectroscopy (XPS) to identify the secondary phases and residual impurities present. The layers studied were for In/Ga mole ratios of x=0, 0.2, 0.4, 0.6, 0.8, and 1.0 in CuGa _x In_1–x Se₂. The layers were also profiled by sputter etching away the surface of the layers and repeating the XPS measurements. The effects of annealing the layers in air, vacuum, and selenium vapor were also investigated.     

Creep deformation of induction pressure welded 2·25Cr-1Mo steel

In this paper, experimental results involving the effect of stress and temperature on creep behaviour of induction pressure welded (IPW) 2·25Cr-1Mo steel are presented. Creep rupture tests were conducted at 550–700°C in steps of 50°C over a stress range of 112·5–180 MPa. Above 650°C failure of the specimen was enhanced due to the microstructural instability. Failure in the specimens occurred invariably in the heat affected zones (HAZ), and the fracture surfaces indicated ductile failure.     

Cloning and characterization of a symbiosis-related gene from an ectomycorrhizal fungus Laccaria bicolor

Point-to-point functional movements involve simultaneous shoulder and elbow joint rotations. In able-bodied subjects these movements are fully automatic, and feed-forward control ensures the synergistic activity of many muscles. Synergy between joint rotations was defined and described as a scaling between joint angular velocities [19]. Similarly, subjects who can control their shoulder movements may be assisted in reaching tasks by functional electrical stimulation (FES) of elbow extensor muscles. The synergistic control paradigm can be implemented in real-time by employing a hierarchically structured production-rules method. The use of production-rules necessitates the acquisition of knowledge and the assembly of a rule-base. A nonparametric technique was designed for the identification of the rules. The identification process was divided into two phases: determination of the scaling parameters, and determination of the stimulation parameters. The scaling parameters, needed for the coordination of movements, were determined in able-bodied subjects. Those depend exclusively on the initial and target positions of the hand. The number of scalings could be reduced by dividing the workspace into 12 zones. The stimulation parameters, needed for the execution of movements, were determined in subjects with paralyzed elbow extensor muscles by identifying triplets: elbow angular velocity, elbow angular acceleration (velocity increments), and the corresponding pulse durations for various classes of movements and loads attached to the hand.     

Dissipative Particle Dynamics Simulation: A Review on Investigating Mesoscale Properties of Polymer Systems

Polymer systems have typical multiscale characteristics, both in space and time. The mesoscopic properties of polymers are difficult to describe through traditional experimental approaches. Dissipative particle dynamics (DPD) is a simulation method used for solving mesoscale problems of complex fluids and soft matter. The mesoscopic properties of polymer systems, such as conformation, dynamics, and transport properties, have been studied extensively using DPD. This paper briefly summarizes the application of DPD to research involving microchannel flow, electrospinning, free-radical polymerization, polymer self-assembly processes, polymer electrolyte fuel cells, and biomedical materials. The main features and possible development avenues of DPD are described as well.     

Role of Interfacial Carbon layer in the Thermal Diffusivity/Conductivity of Silicon Carbide Fiber-Reinforced Reaction-Bonded Silicon Nitride Matrix Composites

The role of an interfacial carbon coating in the heat conduction behavior of a uniaxial silicon carbide nitride was investigated. For such a composite without an interfacial carbon coating the values for the thermal conductivity transverse to the fiber direction agreed very well with the values calculated from composite theory using experimental data parallel to the fiber direction, regardless of the ambient atmosphere. However, for a composite made with carbon-coated fibers the experimental values for the thermal conductivity transverse to the fiber direction under vacuum at room temperature were about a factor of 2 lower than those calculated from composite theory assuming perfect interfacial thermal contact. This discrepancy was attributed to the formation of an interfacial gap, resulting from the thermal expansion mismatch between the fibers and the matrix in combination with the low adhesive strength of the carbon coating. In nitrogen or helium the thermal conductivity was found to be higher because of the contribution of gaseous conduction across the interfacial gap. On switching from vacuum to nitrogen a transient effect in the thermal diffusivity was observed, attributed to the diffusion-limited entry of the gas phase into the interfacial gap. These effects decreased with increasing temperature, due to gap closure, to be virtually absent at 1000°C.     

Utilization of flyash as filler for polybutyleneterepthalate‐toughened epoxy resin

Flyash, a waste product generated in large quantities in thermal power plants, has been posing problems of disposal. The purpose of the present work was to make a meaningful utilization of flyash as filler in neat epoxy resin matrix and 2% Polybutyleneterepthalate (PBT)/epoxy blend matrix. For this purpose, the tensile, flexural, compression, impact, chemical resistance, and water absorption properties were studied. Composites were made with varying proportion of flyash in epoxy resin and 2% PBT/epoxy blend matrix. Tensile, flexural, and compression properties were measured on a computerized universal testing machine, according to ASTM procedures. Impact strength was determined using izod impact tester for un‐notched specimens. PBT (2%)/epoxy blend matrix composites showed improved mechanical properties over neat epoxy flyash composites. All the composites were found to have good chemical resistance toward acids, solvents, and alkalies. These composites showed better water resistance over neat epoxy flyash composites. POLYM. ENG. SCI. 46:946–953, 2006. © 2006 Society of Plastics Engineers     

Bubble temperature data for phenol-alcohol systems: Phenol-I-Amyl alcohol and phenol-n-Amyl alcohol systems

In order to supplement the literature data on VLE, isobaric bubble temperature data were collected for the binary systems phenol-i-amyl alcohol and phenol-n-amyl alcohol over the entire composition range by indirect method using a standard Swietoslawski type ebulliometer. The measurements were made at three sub-atmospheric pressures. The experimental t-x data were correlated with both equation of state method and gamma-phi methods. In the former approach, the Soave equation of state is used, whereas in the latter case Wilson, NRTL and UNIQUAC equations are used.     

Generating vegetation leaf area index Earth system data record from multiple sensors. Part 2: Implementation,analysis and validation

The evaluation of a new global monthly leaf area index (LAI) data set for the period July 1981 to December 2006 derived from AVHRR Normalized Difference Vegetation Index (NDVI) data is described. The physically based algorithm is detailed in the first of the two part series. Here, the implementation, production and evaluation of the data set are described. The data set is evaluated both by direct comparisons to ground data and indirectly through inter-comparisons with similar data sets. This indirect validation showed satisfactory agreement with existing LAI products, importantly MODIS, at a range of spatial scales, and significant correlations with key climate variables in areas where temperature and precipitation limit plant growth. The data set successfully reproduced well-documented spatio-temporal trends and inter-annual variations in vegetation activity in the northern latitudes and semi-arid tropics. Comparison with plot scale field measurements over homogeneous vegetation patches indicated a 7% underestimation when all major vegetation types are taken into account. The error in mean values obtained from distributions of AVHRR LAI and high-resolution field LAI maps for different biomes is within 0.5 LAI for six out of the ten selected sites. These validation exercises though limited by the amount of field data, and thus less than comprehensive, indicated satisfactory agreement between the LAI product and field measurements. Overall, the inter-comparison with short-term LAI data sets, evaluation of long term trends with known variations in climate variables, and validation with field measurements together build confidence in the utility of this new 26 year LAI record for long term vegetation monitoring and modeling studies.