Effects of SO2 on selective catalytic reduction of NO with NH3 over a TiO2 photocatalyst

The effect of SO₂ gas was investigated on the activity of the photo-assisted selective catalytic reduction of nitrogen monoxide (NO) with ammonia (NH₃) over a TiO₂ photocatalyst in the presence of excess oxygen (photo-SCR). The introduction of SO₂ (300 ppm) greatly decreased the activity of the photo-SCR at 373 K. The increment of the reaction temperature enhanced the resistance to SO₂ gas, and at 553 K the conversion of NO was stable for at least 300 min of the reaction. X-ray diffraction, FTIR spectroscopy, thermogravimetry and differential thermal analysis, x-ray photoelectron spectroscopy (XPS), elemental analysis and N₂ adsorption measurement revealed that the ammonium sulfate species were generated after the reaction. There was a strong negative correlation between the deposition amount of the ammonium sulfate species and the specific surface area. Based on the above relationship, we concluded that the deposition of the ammonium sulfate species decreased the specific surface area by plugging the pore structure of the catalyst, and the decrease of the specific surface area resulted in the deactivation of the catalyst.     

Serum vanadium levels in chronic hemodialysis patients

Serum vanadium, aluminum, silicon and beta 2-microglobulin levels as well as the red cell count, hemoglobin and systolic blood pressure were simultaneously measured in 80 chronic hemodialysis patients. The serum vanadium level was positively correlated with the serum levels of aluminum, silicon and beta 2-microglobulin as well as the systolic blood pressure, and was inversely correlated with the red cell count and hemoglobin. The mean serum vanadium level was 18.4 +/- 7.6 ng/ml before hemodialysis and decreased to 13.0 +/- 5.30 ng/ml at the completion of dialysis. The dialysate vanadium level increased from 0.4 +/- 0.2 (inflow) to 1.0 +/- 0.4 ng/ml (outflow). It was concluded that vanadium was transferred from blood to dialysate when purified water was used in the preparation of the dialysate.     

Circulating platelet-derived endothelial cell growth factor increases in hepatocellular carcinoma patients

BACKGROUND: Platelet-derived endothelial cell growth factor (PD-ECGF) is an angiogenic factor that is expressed in various cancer tissues. Little is known regarding plasma PD-ECGF levels in patients with chronic liver disease such as chronic hepatitis (CH), cirrhosis, and hepatocellular carcinoma (HCC) with cirrhosis. The expression of PD-ECGF in HCC tissues also remains to be clarified. METHODS: Plasma PD-ECGF levels in patients with chronic liver disease were determined with an enzyme-linked immunoadsorbent assay system using the mouse monoclonal antibodies specific to PD-ECGF. These were cross-sectionally compared among groups of normal persons, CH, cirrhosis, and HCC patients. The HCC patients were classified into two groups based on TNM stage: early and advanced stage disease groups. PD-ECGF expressions in HCC tissues were immunohistologically examined. RESULTS: The plasma PD-ECGF levels from the normal individuals and those with CH, cirrhosis, and HCC specimens were 4.2+/-0.5, 4.3+/-0.6, 4.6+/-1.1, and 6.0 +/-2.5 U/mL, respectively. The plasma PD-ECGF concentration was highest in HCC (P < 0.05). No significant difference was found among the normal subjects, CH, and cirrhosis specimens. Plasma PD-ECGF concentrations were significantly higher in the advanced stage disease HCC group compared with the early stage disease group (6.75+/-2.62 U/mL vs. 4.19+/-0.34 U/mL) (P < 0.05). Immunohistochemical expression of PD-ECGF in HCC cells increased significantly compared with normal liver cells (P < 0.05). CONCLUSIONS: Circulating PD-ECGF plasma level might be a new tumor marker for progression in patients with HCC. Immunohistological findings correspond to elevation of the plasma PD-ECGF in HCC patients. It is possible that increased production of PD-ECGF in HCC cells causes abundant neovascularization.     

An investigation of induced voltages to an underground gas pipeline from an overhead transmission line

This paper investigates induced voltage characteristics from an overhead transmission line by applying a method of modeling of induced voltages proposed by the authors. EMTP simulation results obtained by the modeling method agree with analytical results obtained from a well‐known formula. The induced voltages are significantly dependent on the configuration of the overhead line. A horizontal line induces the largest voltage in a gas pipeline, and the voltage induced by a vertical twin‐circuit line is about 20% smaller than that induced by a vertical single‐circuit line. The method is applied to a real pipeline system and the simulation results show reasonable agreement with field test results. © 2008 Wiley Periodicals, Inc. Electr Eng Jpn, 164(1): 43–51, 2008; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20465     

Periacinar collagenization in patients with chronic alcoholism

To examine the development of pancreatic fibrosis in alcoholics, the fibrosis types grouped according to Martin's classification were examined by immunohistochemistry using an antibody against alpha-smooth muscle actin (alpha-SMA). The initial stage of periacinar collagenization was also investigated by electron microscopy. The total incidence of pancreatic fibrosis at autopsy of the 29 alcoholics was significantly higher than that of the 40 non-alcoholics. Intralobular sclerosis was observed to be the most frequent type of fibrosis regardless of alcohol intake. No differences in the enhancement of alpha-SMA expression in each type of fibrosis were found between the alcoholics and non-alcoholics. Electron microscopically, myofibroblasts were found around acini in the early stage of periacinar collagenization, and were accompanied by numerous fine filaments (8-15 nm in diameter). The various changes in zymogen granules (ZG), lysosomes and lipid droplets were augmented in the acinar cells of alcoholics. Medium-density materials were also found in dilated rough endoplasmic reticulum (RER). The contents of ZG and RER occasionally leaked out. In conclusion, pancreatic fibrosis was increased in alcoholics; myofibroblasts may play an important role in the initial stage of periacinar collagenization; and the intracellular transport blockage of protein as represented by abnormalities of ZG, ER and lysosomes may contribute to the development of periacinar collagenization.     

Laser Dressing of Metal Bonded Diamond Wheel

In this study, a laser beam is used as a non-contact thermal dressing tool for a bronze bonded diamond wheel. The pulsed-Nd:YAG laser beam is irradiated on the wheel surface and the bond material partially removed by laser irradiation only. In order to efficiently remove the bond material, it is necessary to direct an air jet on the spot irradiated by the laser so as to blow away the molten binder before it solidifies again. Less damage of diamond particles such as micro-cracks or graphitization occurs. In grinding with a laser-dressed wheel, the grinding forces are almost the same as those for a conventionally dressed wheel. Consequently, effective laser dressing can be expected with the associated dressing conditions.     

Studies on biaxial stretching of polypropylene film. IX. Melting behavior of biaxially stretched film in one step

Melting temperature of a film biaxially stretched in one step in air at 152 or 140°C increases with increase of vA, whereas heat of fusion and density decrease with increase of vA, where vA is the degree of stretching in area. The rapid decrease in density occurs for vA > 10. Extrapolation of the plot of the density versus vA^?1/2 gives a value of 0.870 g/cm³ at infinite vA, which has been reported as the amorphous density of isotactic polypropylene by Farrow. This is so because the fine structure of the film becomes more and more amorphous with further stretching and reaches completely amorphous state at infinite vA. The temperature of stretching has a strong effect on the thermal behavior of a film; a low stretching temperature (140°C) brings about lower melting temperature, heat of fusion, and density. Crystallinity after melt press has not so large an effect on the melting behavior as the stretching temperature. Melting temperature and the shape of the thermogram also depend on the heating rate. There is an appropriate heating rate depending on vA which gives the minimum melting temperature. With stretched samples, a small side peak or a shoulder appears at a relatively low temperature in the thermogram when a high heating rate is used.     

Synthesis of polyoxyethylene derivatives of diesters of sucrose with long-chain fatty acids

Summary Since the long-chain fatty acid sucrose diesters inevitably produced in the synthesis of monoesters are only slightly soluble in water, no important use can be found for them at the present time except as oilsoluble emulsifying agents. In order to exploit new uses we have attempted to improve their solubility in water by introducing oxyethylene radicals into the molecule. The addition reaction of ethylene oxide with the sucrose diesters was carried out in an autoclave in the presence of alkaline catalysts. With the reaction temperature maintained between 100–130° the pressure decreased as the reaction proceeded, and one to two hours were required to consume the ethylene oxide used. The addition products are yellow or orange oily materials soluble in water. Aqueous solutions showed good surface-active properties.     

Studies on sublimation of disperse dye out of dyed polymers. I. Rate of sublimation and amorphous transition points of poly(ethylene terephthalate)

Four samples of poly(ethylene terephthalate) film of various crystallinities and orientation were dyed with p-nitroaniline and disperse dyes. When these films were heated under a 2–3 × 10^?3 mm Hg vacuum at a specified temperature T, the dye sublimed out of the dyed specimen. The amount (M_t/M_∞) of sublimed dye is in linear proportion to the square root of the sublimation time, t^½, where M_t and M_∞ are the amounts of dye sublimed for times t and t = ∞. The diffusion coefficient D, calculated from the slope of the above plot, is independent of the dye concentration of the film. When log D is plotted against 1/T°K over the temperature range 320–520°K, the relation is composed of two to four intersecting lines with the slope decreasing with elevation of temperature and with the breaks at about 89°–98°, 122°–135°, 155° and 175°–176°C. These breaks are the amorphous transitions: the first is the glass transition temperature T_g, the second and the fourth are the amorphous transitions corresponding to the crystalline transition points, i.e., the cold crystallization temperature and the smectic–triclinic transition temperature. With some exceptions, these amorphous transitions are found also by dilatometry and electrical conductivity measurements. The apparent activation energy for diffusion decreases from about 100 kcal/mole for the glass state to 22–24 kcal/mole for the region above 180°C. The activation energy for each region changes slightly with the size of dye molecule and the crystallinity and orientation of the film.     

Evaluation for the curing characteristics of phenolic molding compounds by rockwell hardness test at an elevated temperature

Rockwell hardness measurement at an elevated temperature has been proposed as an evaluation method for the curing characteristics of thermosetting molding compounds. This method is convenient and has a high accuracy over a wide range of curing, Using a cone indenter, the following advantages are brought about: a good correspondence with acetone extraction test, in showing the degree of cure of the internal part of a molding rather than that of the skin layer, and a higher sensitivity in measuring higher degrees of cure. On examining curing behavior of commercial phenolic molding compounds by this method, an inflection point was observed on a plot of the hardness vs log curing time. This critical point has been called “the minimum cure time”, beyond which the molding exhibits good physical properties.