Large Area Self-Assembled Ultrathin Polyimine Nanofilms Formed at the Liquid–Liquid Interface Used for Molecular Separation

Separation membranes with higher molecular weight cut-offs are needed to separate ions and small molecules from a mixed feed. The molecular sieving phenomenon can be utilized to separate smaller species with well-defined dimensions from a mixture. Here, the formation of freestanding polyimine nanofilms with thicknesses down to ≈14 nm synthesized via self-assembly of pre-synthesized imine oligomers is reported. Nanofilms are fabricated at the water–xylene interface followed by reversible condensation of polymerization according to the Pieranski theory. Polyimine nanofilm composite membranes are made via transferring the freestanding nanofilm onto ultrafiltration supports. High water permeance of 49.5 L m^-2 h⁻¹ bar⁻¹ is achieved with a complete rejection of brilliant blue-R (BBR; molecular weight = 825 g mol⁻¹) and no more than 10% rejection of monovalent and divalent salts. However, for a mixed feed of BBR dye and monovalent salt, the salt rejection is increased to ≈18%. Membranes are also capable of separating small dyes (e.g., methyl orange; MO; molecular weight = 327 g mol⁻¹) from a mixed feed of BBR and MO. Considering a thickness of ≈14 nm and its separation efficiency, the present membrane has significance in separation processes.     

Heat Transfer Analysis for Gas-to-Liquids Transportation Through Trans Alaska Pipeline

Gas-to-liquids (GTL) technology involves the conversion of natural gas to liquid hydrocarbons. In this article, theoretical studies have been presented to determine the feasibility of transporting GTL products through the Trans-Alaska Pipeline System (TAPS). To successfully transport GTL through TAPS, heat loss along the route must be carefully determined. This study presents heat transfer and fluid dynamic calculations to evaluate this feasibility. Because of heat loss, the fluid temperature decreases in the direction of flow and this affects the fluid properties, which in turn influence convection coefficient and pumping power requirements. The temperature and heat loss distribution along the pipeline at different locations have been calculated. Fairly good agreement with measured oil temperatures is observed. The powers required to pump crude oil and GTL individually, against various losses have been calculated. Two GTL transportation modes have been considered; one as a pure stream of GTL and the second as a commingled mixture with crude oil. These results show that the pumping power and heat loss for GTL are less than that of the crude oil for the same volumetric flow rate. Therefore, GTL can be transported through TAPS using existing equipment at pump stations.     

A genetic‐based neuro‐fuzzy controller for blind equalization of time‐varying channels

This paper presents a neuro‐fuzzy network (NFN) where all its parameters can be tuned simultaneously using genetic algorithms (GAs). The approach combines the merits of fuzzy logic theory, neural networks and GAs. The proposed NFN does not require a priori knowledge about the system and eliminates the need for complicated design steps such as manual tuning of input–output membership functions, and selection of fuzzy rule base. Although, only conventional GAs have been used, convergence results are very encouraging. A well‐known numerical example derived from literature is used to evaluate and compare the performance of the network with other equalizing approaches. Simulation results show that the proposed neuro‐fuzzy controller, all parameters of which have been tuned simultaneously using GAs, offers advantages over existing equalizers and has improved performance. From the perspective of application and implementation, this paper is very interesting as it provides a new method for performing blind equalization. The main contribution of this paper is the use of learning algorithms to train a feed‐forward neural network for M‐ary QAM and PSK signals. This paper also provides a platform for researchers of the area for further development. Copyright © 2008 John Wiley & Sons, Ltd.     

An intelligent decision theoretic approach to producibility optimization in conceptual design

Product optimization involves selecting design, manufacturing, and support attributes that can produce the best system. Producibility or manufacturability is the term often used to describe the relative ease of manufacturing a product. In complex systems, productibility optimization is a very difficult process, particularly when the values of many attributes are restricted by constraints. One challenge is to develop more universal producibility metrics for the conceptual design phase when design information is limited and drawings are nondimensional. This paper develops a new method for producibility optimization in conceptual design based on a combination of both decision theoretic and expert system techniques. Decision theoretic techniques provide the means to model the design for producibility problem in a manner that can deal with risk, uncertainty, and user (or corporate) preferences, and can effectively integrate diverse factors to provide a measure of the overall worth of a design. The particular decision theoretic approach employed is based on multi-attribute utility theory. An illustrative example of the methodology is applied to the conceptual design of a structural composite part.     

Multiple exemplar-based facial image retrieval using independent component analysis.

In this paper, we design a content-based image retrieval system where multiple query examples can be used to indicate the need to retrieve not only images similar to the individual examples, but also those images which actually represent a combination of the content of query images. We propose a scheme for representing content of an image as a combination of features from multiple examples. This scheme is exploited for developing a multiple example-based retrieval engine. We have explored the use of machine learning techniques for generating the most appropriate feature combination scheme for a given class of images. The combination scheme can be used for developing purposive query engines for specialized image databases. Here, we have considered facial image databases. The effectiveness of the image retrieval system is experimentally demonstrated on different databases.     

Effect of chromium aging on the structural and thermal properties of chromium polyacrylate

The effects of aging time of Cr(III) solutions on the structural, thermal, magnetic, and morphological properties of chromium polyacrylate complexes were studied. Chromium retention was found to increase with longer aging periods. IR spectra revealed the formation of polychelate structures with noticeable changes on aging. The interaction of multivalent, polynuclear Cr(III) species with the polymer backbone resulted in a decrease in thermal stability for the complexes prepared from olated chromium solutions. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 490–493, 2005     

Adenosine triphosphate (ATP) and other nucleotides stimulate the hydrolysis of phosphatidylethanolamine in intact fibroblasts

Addition of adenosine triphosphate (ATP) to [¹⁴C]ethanolamine-prelabeled NIH 3T3 fibroblasts resulted in rapid formation of [¹⁴C]ethanolamine from the prelabeled cellular phosphatidylethanolamine (PtdEtn) pool. After 2-min exposure, 10 μM ATP had near maximal effects on PtdEtn hydrolysis. Several other nucleotides, including UTP, ITP, and the stable ATP analog adenosine 5′-O-(3-thiotriphosphate) (ATPγS), also had stimulatory effects on PtdEtn hydrolysis with a potency comparable to that observed with ATP. The same nucleotides which acted on PtdEtn hydrolysis also had similar stimulatory effects on the hydrolysis of phosphatidylcholine (PtdCho) in [¹⁴C]choline-labeled cells. In isolated membranes, Mg²⁺ greatly enhanced the stimulatory effects of ATP and ATPγS, but not of other nucleotides, on the hydrolysis of PtdEtn and PtdCho. Results indicate that in isolated membranes, both ATP and ATPγS stimulate phospholipid hydrolysis by two different mechanisms, but in intact cells only one of these mechanisms appears to be responsive to externally added nucleotides.     

Electrical Conduction in Nano-Structured La0.9Sr0.1Al0.85Co0.05Mg0.1O3 Perovskite Oxide

Nanocrystalline La_0.9Sr_0.1Al_0.85Co_0.05Mg_0.1O₃ oxide powder was synthesized by a citrate–nitrate auto-ignition process and characterized by thermal analysis, X-ray diffraction, and impedance spectroscopy measurements. Nanocrystalline (50–100 nm) powder with perovskite structure could be produced at 900°C by this process. The powder could be sintered to a density more than 96% of the theoretical density at 1550°C. Impedance measurements on the sintered samples unequivocally established the potential of this process in developing nanostructured lanthanum aluminate-based oxides. The sintered La_0.9Sr_0.1Al_0.85Co_0.05Mg_0.1O₃ sample exhibited a conductivity of 2.40 × 10⁻² S/cm in air at 1000°C compared with 4.9 × 10⁻³ S/cm exhibited by La_0.9Sr_0.1Al_0.85Mg_0.15O₃.     

Preprogramming Floating Time of Liquid Marble

Non-sticking droplets wrapped with fine hydrophobic particles, namely liquid marbles, can be transported both on solid and water pool without an undesired spill of the inner encapsulated liquid. While the stimuli-responsive release of the inner liquid in the target area is proposed, the time-programmed release is not yet achieved. Herein, the hydrophobicity of nanoclay is modulated via a catalyst-free 1,4-conjugate addition reaction to form liquid marbles. This nanoclay liquid marble is robust and stable in air but collapses on the liquid pool with a specific lifetime. The lifetime of the liquid marble can be modulated over seconds to hours scale depending on the selection of chemically modulated wettability of the nanoclay. The critical mechanism of lifetime modulation is responsible for controlling the coalescence kinetics between the water pool and inner liquid by nanoclays’ high diffusion length and chemically varied water spreading potential. The NC liquid marble's programmable lifetime to ‘time-bomb’ type drug release and cascade chemical reaction is applied—without requiring any external intervention.