Surface characteristics and electrolysis efficiency of a Palladium-Nickel electrode

In view to finding a better electrode for water electrolysis-the hydrogen and oxygen evolution efficiencies of a Pd-80 at% Ni electrode along with its surface oxidation-reduction characteristics were investigated in alkaline medium using cyclic voltammetry. On cycling the electrode in between the potential range of ?1.0 to +0.65 V, two oxidation and two reduction transformations were observed. The origins of the transformations were found out. Most of the transformation peak potentials were found to be different than that of Pd and Ni electrodes. The generation of (PdNi)(III) species over the electrode surface identified to be the crucial for the oxygen evolution and continuous cycling up to 100 min succeeded to obtain its saturated layer. Tafel plots for both the hydrogen and oxygen evolution reactions (HER and OER) showed two regions. The kinetic parameters for the HER and OER, i.e., exchange current density at zero overpotential (i_o) and slope (b) values for both the low and high overpotential (η) regions were found out. For the HER, the i_o and b values are found to be 6.17 × 10^?2 and 4.36 mA/cm² and 137.0 and 343.9 mV/dec, respectively. For the OER, the values are 2.83 × 10^?3 and 2.35 mA/cm² and 72.8 and 215.1 mV/dec, respectively. On comparing these kinetic values with that available for Pd, Ni and Pd-50 at% Ni, it is realized that the investigated Pd-80 at% Ni electrode showed better electrolysis efficiencies than that of its component materials and Pd-50 at% Ni electrode.     

Role of microporosity and surface functionality of activated carbon in methylene blue dye removal from water

Activated carbons have been prepared from jute stick by both chemical and physical activation methods using zinc chloride and steam, respectively. They were characterized by evaluating surface area, iodine number, pore size distribution, and concentration of surface functional groups. The chemically activated carbon largely featured micropore structure, while the physically activated carbon mainly featured macropore structure. The specific surface area of chemically and physically activated carbons was 2,325 and 723 m ² /g, while the iodine number was 2,105 and 815mg/g, respectively. The concentration of surface functional groups was determined by Boehm titration method, which suggested that different types of surface functional groups are randomly distributed on chemical activated carbons, while it is limited for physical activated carbon. The microporosity along with surface functional groups provided a unique property to chemically activated carbon to adsorb Methylene Blue dye to a large extent. The adsorption of dye was also affected by the adsorption parameters such as adsorption time, temperature and pH. Comparatively, higher temperature and pH significantly facilitated dye adsorption on chemically activated carbon.     

Estimation of colloidal deposition from heterogeneous populations

This paper reports a study of size-heterogeneous colloid filtration in a new bed using different types of colloids under different conditions of flow and solution chemistry. Depth-wise variation of the particle-size-distributions f_i(x), and the total liquid-phase colloid concentration, C(x) are measured which are used to estimate the depth-wise variation of the liquid-phase concentration for each distinct section of the heterogeneous population, C_i(x). It is observed that log C_i(x) is linear with depth, for some systems, while it shows deviation from linearity, with the slope decreasing with depth, for others. Deposition-rates for these distinct sections of the heterogeneous population, k_i, are estimated from the slopes of the log C_i(x) data. These deposition-rates were then compared with predicted homogeneous-population deposition-rates from Colloid Filtration Theory (CFT), which shows agreement between the CFT-based-deposition-rates and heterogeneous-population-data based deposition-rates, for low flow velocities. At higher flow velocities a gap between the CFT-based and Data-based deposition-rates is observed. Deposition-rates from CFT are then used in a heterogeneous-colloid-filtration model, to examine if heterogeneous colloid deposition can be expressed as the sum of its parts. It is observed that, the sum-of-parts model provides a reasonable estimate of colloidal deposition from heterogeneous populations. Based on these results, it is possible to make predictions of colloidal deposition from complex heterogeneous suspensions. A new method for studying heterogeneous colloid filtration is also proposed.     

Correlation of auditory 'oddball' P300 with verbal memory deficits in schizophrenia

BACKGROUND: The study attempts to recruit well known 'cognitive' event related potential measures as an objective estimate of cognitive and specific memory impairment in schizophrenia. METHODS: We examined 19 schizophrenic patients and 28 healthy controls using an auditory discrimination task to elicit event related potentials, and a number of neuropsychological tests, including tests of general intellectual ability, putative frontal lobe function and verbal memory. RESULTS: The late positive deflection presumed to be associated with stimulus evaluation (P300) was of lower amplitude and had a longer latency in the patients compared with controls of similar age and sex. We found correlations between P300 amplitude and latency, and neuropsychological performance scores in patients. There were correlations between decreased P300 amplitude and lower IQ and poorer memory performance, in particular, abnormal semantic clustering, discriminability and intrusion errors. Increased P300 latency was correlated with lower pre-morbid IQ, poorer total memory scores and serial clustering, but paradoxically less relative retrieval deficit and fewer intrusion errors. CONCLUSIONS: These findings suggest that abnormal P300 is generally more likely to occur in patients with memory impairment.     

Brain activation during an auditory ''oddball task'' in schizophrenia measured by single photon emission tomography

When infants are weighed at well baby or infant welfare clinics, the weight change from one visit to the next is used as a guide to the welfare of the child. Infant welfare clinic nurses are expert clinicians who use weight measurements as a rough indicator of well-being only, as it is well known by them that these measurements are fraught with error. This paper calculates the amount of error which was found in repeated tests of weights of infants, and in the weight changes brought about by biological variation. As a result, it is recommended that babies under nine months of age be weighed at clinic visits no less than a fortnight apart, and older infants, at least one month apart. If they are weighed more often, then the weight changes detected will be less than the amount of error which affects the measurements.     

Structural transformation of carbon nanotubes to silicon carbide nanorods or microcrystals by the reaction with different silicon sources in rf induced CVD reactor

Silicon carbide (SiC) nanorods and microcrystals were synthesized through a two-step reaction scheme. Carbon nanotubes (CNTs) were first grown over metal catalyst-loaded Si(1 0 0) wafer surface by thermal decomposition of C₂H₂. The grown CNTs were then reacted with a gas mixture of SiH₄ and C₃H₈ or tetramethylsilane (TMS) to form β-SiC nanostructures. The growth of SiC nanorods was observed when CNTs were reacted with SiH₄ and C₃H₈, whereas SiC microcrystals were formed when reacting the CNTs with TMS. However, the SiC nanostructures were not grown without CNTs. The diameter of the nanorods was around six times larger than that of the mother nanotubes. The nanorods were crystalline β-SiC with the diameter of 300–400 nm and grew along (1 1 1) direction. The structural transformation of CNTs to SiC nanorods or to microcrystals during the reaction was discussed in this paper.     

Effect of Electrodeposition Current and Pulse Parameter on Surface Mechanical and Electrochemical Behavior of Ni–W Alloy Coatings

Metallurgical and Materials Transactions A - Ni–W alloy coatings have various applications because they are capable of replacing hard chromium coatings due to their corrosion, oxidation,...     

Low cost growth route for single-walled carbon nanotubes from decomposition of acetylene over magnesia supported Fe-Mo catalyst

A large amount of single wall carbon nanotubes (SWNTs) was successfully produced by thermal decomposition of C₂H, at 800 °C over magnesia supported Fe-Mo bimetallic catalysts in a tubular flow reactor under an atmosphere of hydrogen flow. The growth density of SWNTs increased with increasing the weight percent of the catalyst metals (wt% ratio of two metals: 50 : 50) supported on magnesia (MgO) from 5 to 30 wt%. The yield of SWNTs reached 144.3% over 30 wt% metal-loaded catalyst. Raman measurements showed the growth of bundle type SWNTs with diameters ranging from 0.81 to 1.96 nm. The growth of SWNTs was also identified by thermal gravimetric analysis (TGA) and Raman spectroscopy.     

Effects of indoor environmental parameters related to building heating,ventilation, and air conditioning systems on patients' medical outcomes: A review of scientific research on hospital buildings

The indoor environment of a mechanically ventilated hospital building controls infection rates as well as influences patients’ healing processes and overall medical outcomes. This review covers the scientific research that has assessed patients’ medical outcomes concerning at least one indoor environmental parameter related to building heating, ventilation, and air conditioning (HVAC) systems, such as indoor air temperature, relative humidity, and indoor air ventilation parameters. Research related to the naturally ventilated hospital buildings was outside the scope of this review article. After 1998, a total of 899 papers were identified that fit the inclusion criteria of this study. Of these, 176 papers have been included in this review to understand the relationship between the health outcomes of a patient and the indoor environment of a mechanically ventilated hospital building. The purpose of this literature review was to summarize how indoor environmental parameters related to mechanical ventilation systems of a hospital building are impacting patients. This review suggests that there is a need for future interdisciplinary collaborative research to quantify the optimum range for HVAC parameters considering airborne exposures and patients’ positive medical outcomes.