One-step synthesis of functional Co nanoparticles for surface-initiated polymerization

Much effort is conducted to construct artificial objects that are capable of converting chemical or electromagnetic energy into a specific, predetermined motion on the nanoscale. We present results on the synthesis of core–shell nanoparticles capable to be set in rotation by the application of electromagnetic fields. The nanorotors implied in the study are based on the cobalt nanospheres decorated with a stabilizing brush shell composed of poly(?-caprolactone) that is attached by surface-initiated polymerization. The functional cores used as macroinitiators can be fabricated alternatively by a two-step or a one-step process.     

(R,R)-2,2'-[1,2-ethanediylbis[imino(1-methyl-2,1-ethanediyl)]]- bis[5-nitro-1H-benz[de]isoquinoline-1,3-(2H)-dione] dimethanesulfonate (DMP 840), a novel bis-naphthalimide with potent nonselective tumoricidal activity in vitro

(R,R)-2,2'-[1,2-ethanediylbis[imino(1-methyl-2,1-ethanediyl)]]- bis[5-nitro-1H-benz[de]isoquinoline-1,3-(2H)-dione] dimethanesulfonate (DMP 840), is a bis-naphthalimide anticancer tumoricidal agent currently in phase I clinical trials. DMP 840 exhibits curative activity in human tumor xenografts, where it shows selectivity for human solid tumors over murine leukemias. In contrast to the selectivity found for DMP 840 in vivo, DMP 840 exhibits potent antiproliferative activity in vitro against a variety of human and murine leukemia and solid tumor cell lines in culture, with inhibitory doses that reduce the number of treated cells to one half (IC50) values ranging from 2.3 to 53 nM. DMP 840 was growth inhibitory to three doxorubicin-resistant cell lines with IC50 values also in the nanomolar range. Clonogenic survival experiments showed that DMP 840 was equally cytotoxic to both exponentially growing and quiescent human clone A colon carcinoma cells. A 1-h incubation of DMP 840 (1.22-12 microM) caused 5-log cell kill in KB-3-1 human epidermoid carcinoma, clone A human colon carcinoma, and L1210 murine leukemia cell lines. The rapid cell killing by DMP 840 in clonogenic survival experiments and initial mechanism of action studies was consistent with a DNA-interactive mechanism for DMP 840 cytotoxicity. Mechanism of action studies in L1210 leukemia cells demonstrated that DMP 840 inhibited the incorporation of thymidine and uridine into DNA and RNA with IC50 values of 0.55 and 0.08 microM, respectively. DMP 840 produced DNA single-strand breaks in a dose-dependent manner. Double-strand breaks were not observed with DMP 840 treatment, even at higher concentrations of compound. Chinese hamster ovary (CHO) and P388 cells resistant to camptothecin and containing a mutant form of topoisomerase I were also used to evaluate whether DMP 840 was cross-resistant with agents active against topoisomerase I. While the CHOR line was 163-fold resistant to camptothecin, the CHOR line was only 1.7-fold resistant to DMP 840. In summary, DMP 840 is a DNA-interactive agent that demonstrates excellent antiproliferative activity in vitro against cultured tumor cells from both human and murine sources. Its mechanism of tumoricidal activity may be novel.     

Biosynthesis and identification of volatiles released by the myxobacterium Stigmatella aurantiaca

The volatiles released by agar plate cultures of two strains of the myxobacterium Stigmatella aurantiaca (strains Sg a15 and DW4/3-1) were collected in a closed-loop stripping apparatus (CLSA) and analyzed by GC-MS. Large numbers of substances from different compound classes (ketones, esters, lactones, terpenes, and sulfur and nitrogen compounds) were identified; several of them are reported from natural sources for the first time. The volatiles 2-methyltridecan-4-one (17), its isomer 3-methyltridecan-4-one (20), and the higher homologue 2-methyltetradecan-4-one (18) were identified in the extracts of both strains and were synthesized. In addition, strain Sg a15 produced 2,12-dimethyltridecan-4-one (19), 2-methyltridec-2-en-4-one (23), and a series of phenyl ketones, among them 1-phenyldecan-1-one (14) and 9-methyl-1-phenyldecan-1-one (16), whereas strain DW4/3-1 emitted traces of 10-methylundecan-2-one (21). The biosynthesis of 14 and 16 was examined in feeding experiments with deuterated precursors carried out on agar plate cultures. The leucine-derived starter unit isovalerate was shown to be incorporated into 16, as was phenylalanine-derived benzoic acid into both 14 and 16. The results point to formation both of the phenyl ketones and of the structurally related aliphatic ketones through an unusual head-to-head coupling between a starter unit such as benzoyl-CoA and a fatty acyl-CoA, followed by decarboxylation.     

Microstructural Characterization of Cofired Tungsten-Metallized High-Alumina Electronic Substrates

Microstructural characterization of a high-Al₂O₃ substrate containing cofired thick-film tungsten metallization, with particular emphasis on the metal/ceramic interface, was conducted. The substrate contained tabular Al₂O₃ grains surrounded by a continuous calcium magnesium aluminum silicate glass containing particles of monoclinic ZrO₂ and reduced rutile (TiO_{2- x} ). The metal/ceramic adhesion was caused by mechanical interlocking between the W and Al₂O₃ grains by the glass phase which penetrated the porous W layers during sintering; there was no interfacial reaction or diffusion zone. The mechanical properties of the W metallization did not limit interfacial strength. Heat treatments of the substrate at 1400 K in air and under vacuum resulted in the devitrification of the intergranular glass. The most abundant devitrification product was anorthite (CaAl₂Si₂O₈), accompanied by magnesium aluminate titanate, magnesium aluminate spinel, α-cristobalite (SiO₂), and α-cordierite (Mg₂Al₄Si₅O₁₈). In addition, small rutile particles precipitated within the Al₂O₃ grains.     

A simple method for the objective characterisation of fabric softness. Part 1: Influence of bleaching,dyeing and crosslinking of wool*

A simple method for the characterisation of fabric softness using a conventional tensile tester and a special measurement device has been developed. The method is demonstrated to be especially useful in detecting changes in softness of a given substrate due to different treatments. The results obtained, particularly hysteresis at 75% of the maximum extension, provide a good correlation with subjective ranking for samples that are subjectively distinguishable; they also differentiate well between samples which seem subjectively indistinguishable. Screening tests were carried out, mainly on wool fabrics, to find the effect of different treatments such as oxidative (alkaline and acidic) and reductive (Blankit IN) bleaching, dyeing with acid and a 1:2 metal complex, chrome and (mono and bi)reactive dyes, the effect of the antisetting agent Basolan AS (BASF) and of crosslinking with Irgasol HTW (CGY) on fabric softness.     

Activity,selectivity, and methanol tolerance of novel carbon-supported Pt and Pt<Subscript>3</Subscript>Me (Me = Ni,Co) cathode catalysts

The activity, selectivity, and methanol tolerance of novel, carbon supported high-metal loading (40 wt.%) Pt/C and Pt₃Me/C (Me = Ni, Co) catalysts for the O₂ reduction reaction (ORR) were evaluated in model studies under defined mass transport and diffusion conditions, by rotating (ring) disk and by differential electrochemical mass spectrometry. The catalysts were synthesized by the organometallic route, via deposition of pre-formed Pt and Pt₃Me pre-cursors followed by their decomposition into metal nanoparticles. Characteristic properties such as particle sizes, particle composition and phase formation, and active surface area, were determined by transmission electron microscopy, energy dispersive X-ray spectroscopy, X-ray photoelectron spectroscopy, and X-ray diffraction. For comparison, commercial Pt/C catalysts (20 and 40 wt.%, E-Tek, Somerset, NJ, USA) were investigated as well, allowing to evaluate Pt loading effects and, by comparison with the pre-cursor-based catalyst with their much smaller particle sizes (1.7 nm diameter), also particle size effects. Kinetic parameters for the ORR were evaluated; the ORR activities of the bimetallic catalysts and of the synthesized Pt/C catalyst were comparable and similar to that of the high-loading commercial Pt/C catalyst; at typical cathode operation potentials H₂O₂ formation is negligible for the synthesized catalysts. Due to their lower methanol oxidation activity the bimetallic catalysts show an improved methanol tolerance compared to the commercial Pt/C catalysts. The results indicate that the use of very small particle sizes is a possible way to achieve reasonably good ORR activities at an improved methanol tolerance at DMFC cathode relevant conditions.     

The Formation of Calcified Nanospherites during Micropetrosis Represents a Unique Mineralization Mechanism in Aged Human Bone

Osteocytes—the central regulators of bone remodeling—are enclosed in a network of microcavities (lacunae) and nanocanals (canaliculi) pervading the mineralized bone. In a hitherto obscure process related to aging and disease, local plugs in the lacuno‐canalicular network disrupt cellular communication and impede bone homeostasis. By utilizing a suite of high‐resolution imaging and physics‐based techniques, it is shown here that the local plugs develop by accumulation and fusion of calcified nanospherites in lacunae and canaliculi (micropetrosis). Two distinctive nanospherites phenotypes are found to originate from different osteocytic elements. A substantial deviation in the spherites' composition in comparison to mineralized bone further suggests a mineralization process unlike regular bone mineralization. Clearly, mineralization of osteocyte lacunae qualifies as a strong marker for degrading bone material quality in skeletal aging. The understanding of micropetrosis may guide future therapeutics toward preserving osteocyte viability to maintain mechanical competence and fracture resistance of bone in elderly individuals.