A new design strategy for DC/DC LLC resonant converter: Concept,modeling, and fabrication

In this paper, a new design procedure for LLC converter has been introduced. In fact, this method is a computer-based design algorithm based on a numerical technique. In the process of designing, the value of the resonant element is obtained by solving the LLC converter fundamental equation. This converter will be controlled by using state feedback, such as output voltage variable. As a matter of fact, in a control system, the change of output voltage (because of load variation) will affect the switching frequency, so the output voltage will be tuned. In the designing process, the fundamental equations of LLC converter are obtained, and the value of the resonant elements is calculated. Also, a comparison analysis is carried out between the proposed and typical methods. The simulation is done to investigate the validity of the proposed method. Moreover, a prototype is manufactured, and the experimental test is done to evaluate its applicability.     

Intelligent control of static synchronous series compensator via an adaptive self-tuning PID controller for suppression of torsional oscillations

In this paper, an intelligent controller is proposed to control a static synchronous series compensator (SSSC) in order to mitigate subsynchronous resonance (SSR) oscillations in a power system. This intelligent controller is an adaptive self-tuning PID controller. To train the PID controller, the gradient descent method is employed where the learning rate is adapted in every iteration in order to accelerate the speed of convergence. This control scheme also requires a wavelet neural network (WNN) to identify the controlled system dynamic. To update the parameters of WNN, the gradient descent (GD) along with the adaptive learning rates derived by the Lyapunov method is used. The computer simulations are used to show the ability of the proposed controller. In addition, the performance of the proposed controller is compared with another self-tuning PID controller. The results demonstrate that the proposed controller has a successful performance in minimizing the SSR.     

Bioinspired Nacre‐Like Ceramic with Nickel Inclusions Fabricated by Electroless Plating and Spark Plasma Sintering

Hybrid composites of layered brittle‐ductile constituents assembled in a brick‐and‐mortar architecture are promising for applications requiring high strength and toughness. Mostly, polymer mortars have been considered as the ductile layer in brick‐and‐mortar composites. However, low stiffness of polymers does not efficiently transfer the shear between hard ceramic bricks. Theoretical models point to metals as a more efficient mortar layer. However, infiltration of metals into ceramic scaffold is non‐trivial, given the low wetting between metals and ceramics. The authors report on an alternative approach to fabricate brick‐and‐mortar ceramic‐metal composites by using electroless plating of nickel (Ni) on alumina micro‐platelets, in which Ni‐coated micro‐platelets are subsequently aligned by a magnetic field, taking advantage of ferromagnetic properties of Ni. The assembled Ni‐coated ceramic scaffold is then sintered using spark plasma sintering (SPS) to locally create Ni mortar layers between ceramic platelets, as well as to sinter the ceramic micro‐platelets. The authors report on materials and mechanical properties of the fabricated composite. The results show that this approach is promising toward development of bioinspired ceramic‐metal composites.

     

Homotopy perturbation method for motion of a spherical solid particle in plane couette fluid flow

He’s homotopy perturbation method is applied to obtain exact analytical solutions for the motion of a spherical particle in a plane couette flow. It is demonstrated that the applied analytical method is very straightforward in comparison with existing techniques. Furthermore, it is decidedly effectual in terms of accuracy and rapid convergence. The formulation of the problem is presented in the text as well as the analytical and numerical procedures. The current results can be used in different areas of particulate flows.     

Controller Design Based On Wavelet Neural Adaptive Proportional Plus Conventional Integral-Derivative For Bilateral Teleoperation Systems With Time-Varying Parameters

International Journal of Control, Automation and Systems - In this study, a new controller method based on wavelet neural adaptive proportional plus conventional integral-derivative (WNAP+ID)...     

Discussion on “Enhancement of combined heat and power economic dispatch using self adaptive real-coded genetic algorithm,by P. Subbaraj et al., Applied Energy 86 (2009) 915–921.”

The paper studied by Subbaraj et al. (2009) considers the feasibility of using self adaptive real-coded genetic algorithm for enhancement of combined heat and power economic dispatch. The paper includes some problems about the considered feasible operating region. In this discussion, the controversial point of the paper are given.     

Experimental and numerical investigations of low velocity impact behavior of high-performance fiber-reinforced cement based composite

Fiber-reinforced concrete (FRC) has been used in structural applications in order to enhance the structural performance under dynamic loading and reduce cracking and spalling phenomena by increasing toughness, ductility, and tensile strength of the concrete. High-performance fiber-reinforced cement based composite (HPFRC) is a high-strength FRC with enhanced high-performance characteristics. Recent studies have shown that HPFRC has higher impact resistance than other types of concrete. Therefore, it has been widely considered as a promising material for the construction of important and strategic structures. HPFRC panels are tested by drop projectiles up to an impact at which failure occurs. Mechanical properties of HPFRC are obtained to define material parameters in the MAT_SOIL_CONCRETE model in LS-DYNA, which is used to simulate the behavior of HPFRC panel under impact loading and perform parametric studies. Predicted crack and failure patterns on both sides of the HPFRC panel based on finite element simulation are in good agreement with their corresponding experimental results.     

Influences of feeding conditions and objective function on the optimal design of gas flow channel of a PEM fuel cell

Polymer electrolyte membrane fuel cell (PEMFC) is one of the promising electricity generating technologies with a wide range of applicability; however, it needs further improvements to be commercially viable. The design of a PEMFC plays a key role in its viability, and is often reduced to the design of gas flow channel (GFC) at the cathode side. In this study, it is attempted to figure out the optimal dimensions (i.e., width and height) of the rectangular cross sectional area of the cathode GFC of a PEMFC via numerical examination of various sets of dimensions. The optimization procedure is carried out for two different objective functions (the maximization of the maximum power and the maximization of the average power over a range of operating voltages) as well as for different sets of operating conditions (cell temperature, operating pressure, and stoichiometry and relative humidity of inlet gases). To the best of authors' knowledge, the following observations may be considered to be the contributions of the present work to the subject: First, the influence of cross sectional dimensions on the PEMFC performance is considerable, and this considerable influence is not limited to a specific set of operating conditions. Second, the performance of the PEMFC may both deteriorate and improve with the channel width or height, depending on its operating conditions as well as on its current dimensions. Third, there exists no single optimal cross section for different sets of operating conditions. Fourth, the polarization curves of two different cross sections may intersect, and as a result, one cross section may have a greater maximum power but at the same time lower average power in comparison to the other one. And fifth, among all the operating parameters, the relative humidity of inlet gases has the greatest effect on the optimal cross sectional dimensions.