Fabrication of Copper Nanowire Films and their Incorporation into Polymer Matrices for Antibacterial and Marine Antifouling Applications

With the ban of tributyltin, copper‐based biocides are now widely used in antifouling coatings as the major active ingredients. Given the past experience of heavy‐metal accumulation in harbors with limited water exchange, there is a significant interest in developing copper materials that greatly reduce the amount of copper ions released into marine surroundings. In this paper, copper nanowires (NWs) encapsulated in polymer matrices are investigated as the means to control the release of copper ions and to achieve a long‐lasting antifouling effect. Very long CuNWs with high aspect ratio in organic solution are drop‐coated onto substrates to fabricate uniform thin films. They are then incorporated into an elastomeric polydimethylsiloxane (PDMS) matrix. A small amount of CuNWs in PDMS can inhibit barnacle cyprid settlement, while it exhibits low mortality to cyprids and nauplii present in the surrounding seawater environment. The low levels of copper released after 50 days suggest that the intersecting and interconnected CuNWs embedded in PDMS could potentially release copper ions continuously over a few years in seawater. This approach provides a novel platform to use hybrid materials as effective marine antifouling coatings, and may be applied to fouling release materials to enhance their antifouling properties.     

Doubled layered ITO/SnO2 conducting glass for substrate of dye-sensitized solar cells

The effects of indium tin oxide (ITO) and ITO/SnO₂ conducting substrates on photovoltaic properties of dye-sensitized solar cells (DSCs) using nanocrystalline TiO₂ were studied. The decrease in fill factor of the DSCs was correlated to the increase in resistance of conducting substrate. The heat stability of ITO conducting glass was improved by depositing SnO₂ on ITO layer. The efficiency of the cells using double layered ITO/SnO₂ substrate remarkably increased comparing with that of the cells using ITO substrates. It is worth mentioning that increasing in sintering time, which enhanced the electronic contact between substrate and TiO₂, also modified the cell performance of MP-TiO₂ cells. Our experimental finding suggests that 3000 Å ITO substrate, which was covered by 1000 Å SnO₂ layer, exhibited the best properties for the DSCs.     

Photocatalytic activity of nanocrystalline mesoporous-assembled TiO2 photocatalyst for degradation of methyl orange monoazo dye in aqueous wastewater

In this work, nanocrystalline mesoporous-assembled TiO₂ photocatalyst was synthesized by a sol–gel process with the aid of a structure-directing surfactant and employed for the photocatalytic degradation of methyl orange azo dye (monoazo dye), as compared to various commercially available non-mesoporous-assembled TiO₂ powders. The experimental results showed that the synthesized mesoporous-assembled TiO₂ nanocrystal calcined at 500 °C provided superior decolorization and degradation performance to the non-mesoporous-assembled commercial TiO₂ powders. In addition, several operational parameters affecting the decolorization and degradation of methyl orange, namely photocatalyst dosage, initial dye concentration, H₂O₂ concentration, and initial solution pH, were systematically investigated, using the mesoporous-assembled TiO₂ nanocrystal. The optimum conditions were a photocatalyst dosage of 7 g/l, an initial dye concentration of 5 mg/l, a H₂O₂ concentration of 0.5 M, and an initial solution pH of 4.7, exhibiting the highest decolorization rate of methyl orange.     

Hydrogen production over metal-loaded mesoporous-assembled SrTiO3 nanocrystal photocatalysts: Effects of metal type and loading

Mesoporous-assembled SrTiO₃ photocatalysts with different loaded metal co-catalysts (Au,Pt, Ag, Ni, Ce, and Fe) synthesized by the single-step sol–gel method with the aid of a structure-directing surfactant were tested for the photocatalytic activity of hydrogen production from a methanol aqueous solution under both UV and visible light irradiation. The Au, Pt, Ag, and Ni loadings had a positive effect on the photocatalytic activity enhancement, whereas the Ce and Fe loadings did not. The best loaded metal was found to be Au due to its electrochemical properties compatible with the SrTiO₃-based photocatalyst and its visible light harvesting enhancement. A 1 wt.% Au-loaded SrTiO₃ photocatalyst exhibited the highest photocatalytic hydrogen production activity with a hydrogen production rate of 337 and 200 μmol h⁻¹ g_cat⁻¹ under UV and visible light irradiation, respectively. The hydrogen diffusivity from the liquid phase to the gas phase also significantly affected the photocatalytic hydrogen production efficiency. An increase in the hydrogen diffusability led to an increase in the photocatalytic hydrogen production efficiency.     

Synthesis of mesoporous-assembled TiO2 nanocrystals by a modified urea-aided sol-gel process and their outstanding photocatalytic H2 production activity

Mesoporous-assembled TiO₂ nanocrystals with very high photocatalytic H₂ production activity were synthesized through a modified sol-gel process with the aid of urea as mesopore-directing agent, heat-treated under various calcination temperatures, and assessed for their photocatalytic H₂ production activity via water splitting reaction. The resulting mesoporous-assembled TiO₂ nanocrystals were systematically characterized by N₂ adsorption-desorption analysis, surface area and pore size distribution analyses, X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The experimental results showed that the photocatalytic H₂ production activity of the synthesized mesoporous-assembled TiO₂ nanocrystal calcined at 500 °C, which possessed very narrow pore size distribution, was extraordinarily higher than that of the commercially available P-25 TiO₂ and ST-01 TiO₂ powders.     

Mesoporous-assembled V2O5 nanosheet synthesized via a surfactant-modified sol-gel technique and its photocatalytic H2 production activity under visible light irradiation

A modified sol-gel technique with the aid of a structure-directing surfactant was employed to synthesize highly crystalline mesoporous-assembled V₂O₅ nanosheet under mild conditions. The synthesized V₂O₅ nanosheet was systematically characterized by TG-DTA, XRD, N₂ adsorption-desorption, high resolution TEM, and UV-visible spectroscopy analyses. The characterization results revealed that the synthesized V₂O₅ nanosheet exhibited not only high crystallinity but also narrow pore size distribution in the mesoporous range. The photocatalytic H₂ production activity of the synthesized mesoporous-assembled V₂O₅ nanosheet from both self photoexcitation and dye photosensitization systems under visible light irradiation was also found to be higher than that of a commercially available V₂O₅ powder.     

TiO2/modified natural clay semiconductor as a potential electrode for natural dye-sensitized solar cell

TiO₂/modified natural bentonite clay semiconductor, as a potential electrode of dye-sensitized solar cell, having a Ti:Si molar ratio of 85:15 was, for the first time, compared with pure TiO₂ (commercial P25) electrode in terms of solar cell efficiency and characteristics. 4-Chloro-2,5-difluorobenzoic acid and 4-(chloromethyl)benzoyl chloride were added to the electrodes to increase light harvesting ability of natural dyes extracted from red cabbage, rosella, and blue pea. The results showed that the TiO₂/clay semiconductor provided a higher surface area but a slightly lower efficiency than the pure TiO₂. The best natural sensitizer was found to be the dye extracted from red cabbage. Besides, the 4-(chloromethyl)benzoyl chloride provided a higher short circuit current for the TiO₂/clay semiconductor.     

Hydrogen production from water splitting under UV light irradiation over Ag-loaded mesoporous-assembled TiO2-ZrO2 mixed oxide nanocrystal photocatalysts

Hydrogen production from the photocatalytic water splitting reaction is very attractive because it is an environmentally friendly process, where hydrogen is produced from two abundantly renewable sources, i.e. water and solar energy, with the aid of photocatalysts. TiO₂ is the most widely investigated photocatalyst; however, it alone still exhibits low performance to photocatalytically produce hydrogen. Hence, the aim of this work focused on the enhanced photocatalytic hydrogen production over Ag-loaded mesoporous-assembled TiO₂-ZrO₂ mixed oxide nanocrystal photocatalysts under UV light irradiation. The TiO₂-ZrO₂ mixed oxides with various TiO₂-to-ZrO₂ molar ratios were synthesized by a sol-gel process with the aid of a structure-directing surfactant, followed by Ag loading via a photochemical deposition method. The influences of photocatalyst preparation parameters, i.e. calcination temperature, phase composition, and Ag loading, were studied. The results revealed that the mesoporous-assembled TiO₂-ZrO₂ mixed oxide nanocrystal photocatalyst with a TiO₂-to-ZrO₂ molar ratio of 93:7 calcined at 500 °C exhibited the highest photocatalytic hydrogen production activity, and the Ag loading of 0.5 wt.% further greatly enhanced the photocatalytic activity of such TiO₂-ZrO₂ mixed oxide photocatalyst.