A comparative study on in vitro behavior of calcium silicate ceramics synthesized from biowaste resources

Calcium silicate ceramics have received significant attention for biomedical applications for their excellent bioactivity and osteoconduction properties. Sol-gel process is extensively used for the fabrication of calcium silicates. In sol-gel process, calcium nitrate tetra hydrate (Ca(NO₃)₂·4H₂O) and tetraethylorthosilicate (TEOS) are used as precursors. However, these precursors are expensive. The objective of this work was to compare in vitro behavior of calcium silicate (CaSiO₃) produced using biowaste such as rice husk ash (RHA) and eggshells (coded; NCS) with CaSiO₃ prepared using TEOS and Ca(NO₃)₂·4H₂O (coded; CCS). Thermal investigation results revealed that the crystallization temperature for NCS is relatively lower (772°C) than for CCS (870°C). Bioactivity was studied in vitro using simulated body fluid (SBF) with respect to mineralization rate of hydroxyapatite. Mineralization of a greater hydroxyapatite was observed on NCS ceramics than CCS ceramics after incubation for 3, 7, 14 days in SBF solution, which was confirmed using X-ray diffractometer, Fourier transform infrared spectroscopy, scanning electron microscopy-energy dispersive spectroscopy. Degradation studies were conducted in Tris-HCl solution and the test results revealed that NCS ceramics has lower dissolution rate than CCS ceramics. The antimicrobial assay has shown that NCS samples exhibit significant zone of inhibition against Escherichia coli and Staphylococcus aureus which confirmed that the CaSiO₃ prepared from RHA and eggshell can prevent bacteria from adhering to the surface. In addition cell culture studies revealed that NCS ceramics possess good cytocompatibility with MG-63 cells and significantly promoted cell proliferation.     

Cost optimal, parallel reliability systems with fixed repair sanction

Optimisation methods under varied criteria for different parameters in stochastic reliability systems are being increasingly developed and have been reported in recent literature. The large interest evinced in this fascinating area is primarily due to its applicational value and operational role in the decision making process. Recently a parallel system has been considered and the optimal number of units discussed, as well as optimal replacement times for the system based on acquisition and replacement costs.In this paper we consider an improved version of the model formulation, by bringing in additionally the maintenance and per unit repair time costs, and develop a procedure to obtain the optimal number of components in the system with the condition that the system is allowed to undergo a prefixed maximum number of repairs, after which the system is to be replaced.The applicational use of the results is illustrated through numerical work, specialising to some known laws governing the system parameters and corresponding to different fixed number of repair sanctions.     

Oxygen-enrichment of YBa2Cu3 YBa2Cu3O7-δ using the fluidization techniqueusing the fluidization technique

The oxygen-deficient phase of the highT _c superconductor, YBa₂Cu₃O₇, was oxygen-enriched using the fluidization technique to give good superconducting properties. The normal method of oxygen treatment at 900°C for 24 h and at 600°C for 24 h has been reduced to just one treatment at 600°C for 12 h by the fluidization technique to achieve almost the same strength of superconducting signal for the YBa₂Cu₃O₇ powder, which establishes the attractiveness of the latter route for the large-scale preparation of superconducting material. The particle sizes were in the range 0–90, 90–180 and 180–420 μm. The fluidized particles were crystalline with orthorhombic distortion.T _c ^onset , estimated using the a.c. magnetic susceptibility method, was 91·3 K. The volume fraction of superconducting material in the product was 83·7–85·3%, one of the highest values reported so far for YBa₂Cu₃O₇.     

A study of synthesizing benzaldehydes from propenylbenzenes and cinnamic acid derivatives

Propenylbenzenes and cinnamic acid derivatives yield correspondingly substituted benzaldehydes when oxidized by lead-ruthenium pyrochlore oxide in the presence of sodium hydrochlorite as a co-oxidant at pH 11 under heterogeneous conditions. The reaction of terminal and internal aliphatic alkenes under similar conditions affords no aldehydes.     

Descriptive epidemiology of childhood cancers in Bangalore, India

While fairly complete and reliable incident data on childhood cancers are available from the registries in India, mortality and survival information is not. Information concerning the latter was obtained by the Bangalore cancer registry through active follow-up involving visits to homes of patients. Between 1982 and 1989, 617 cases of cancers in childhood were registered, giving an age-standardized incidence rate of 84.8 and 48.4 per million in male and female children, respectively. Active follow-up provided mortality/survival information in 532 or 86.2 percent of these cases. Overall, observed five-year survival was 36.8 percent (both genders combined) with a relative survival of 37.5 percent when childhood mortality in the general population was taken into account. The five-year relative survival was best for thyroid carcinoma (100 percent) followed by Hodgkin's disease (73 percent) and retinoblastoma (72.9 percent). Survival was comparatively low, being 9.9 percent in acute nonlymphatic leukemia and less than 20 percent in rhabdomyosarcoma and the category grouped as 'other malignant neoplasms.' Survival in Hodgkin's disease was influenced by clinical stage at presentation, but was not statistically significant possibly due to small numbers.     

The determination of the enthalpy of formation and the enthalpy increment of Cd0.5Te0.5 by Calvet calorimetry

The enthalpy of formation of Cd_0.5Te_0.5(s) has been determined using a Calvet calorimeter at 785 K by direct reaction calorimetry. The heat changes were measured for the additions of Cd(s) or Te(s) from 298 K to a reaction crucible containing the other liquid metal at 785 K. Measurements were also carried out to determine the enthalpy changes due to the direct reaction of the Te(l) and Cd(l) at 785 K. The enthalpies of formation of Cd_0.5Te_0.5 calculated from the two sets of experiments were in agreement. The H_T°---H₂₉₈° values of the Cd_0.5Te_0.5 compound have also been determined in the temperature range 406–826 K by the drop method. Using ΔH_fm° at 785 K and H_T---H₂₉₈° values of Cd_0.5Te_0.5, ΔH_fm° at 298 K was determined to be −(50.349±0.510) kJ mol⁻¹.     

Microstructure and Magnetic Properties of Sn<Subscript>1 − <Emphasis Type="Italic">x</Emphasis></Subscript>Ni<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>O<Subscript>2</Subscript> Thin Films Prepared by Flash Evaporation Technique

An effort was made to develop semiconductor oxide-based room temperature dilute magnetic semiconductor (DMS) thin films based on wide band gap and transparent host lattice with transition metal substitution. The Sn\(_{\mathrm {1}-x}\)Ni\(_{x}\textit {O}_{\mathrm {2}}\) (\(x\,= \mathrm {0.00, 0.03, 0.05, 0.07, 0.10, and \,0.15}\)) thin film samples were prepared on glass substrates by flash evaporation technique. All the samples were shown single phase crystalline rutile structure of host SnO\(_{\mathrm {2}}\) with dominant (110) orientation. The Ni substitution promotes reduction of average crystallite size in SnO\(_{\mathrm {2}}\) as evidenced from the reduction of crystallite size from 40 (SnO\(_{\mathrm {2}}\)) to 20 nm (Sn\(_{\mathrm {0.85}}\)Ni\(_{\mathrm {0.15}}\textit {O}_{\mathrm {2}}\)). In the energy dispersive spectra as well as X-ray photoelectron spectra of all the samples show, the chemical compositions are close to stoichiometric with noticeable oxygen deficiency. The crystalline films were formed by coalescence of oval-shaped polycrystalline particles of 100 nm size as evidenced from the electron micrographs. The energy band gap of DMS films decreases from 4 (SnO\(_{\mathrm {2}}\)) to 3.8 eV (x \(=\) 0.05) with increase of Ni content. The magnetic hysteresis loops of all the samples at room temperature show soft ferromagnetic nature except for SnO\(_{\mathrm {2}}\) film. The SnO\(_{\mathrm {2}}\) films show diamagnetic nature and it converts into ferromagnetic upon substitution of 3 % Sn\(^{\mathrm {4+}}\) by Ni\(^{\mathrm {2+}}\). The robust intrinsic ferromagnetism (saturation magnetization, 21 emu/cm\(^{\mathrm {3}}\)). Further increase of Ni content weakens ferromagnetic strength due to Ni-O antiferromagnetic interactions among the nearest neighbour Ni ions via O\(^{\mathrm {2-}}\) ions. The observed magnetic properties were best described by bound magnetic polarons model.     

Optical detection of CA 15.3 breast cancer antigen using CdS quantum dot

The present study focus on optical sensing of breast cancer antigen 15.3 (CA 15.3) using cadmium sulphide quantum dot (CdS‐QD) in saline and serum samples spiked with antigen. The surface of CdS‐QD was modified by cysteamine capping followed by tagging of CA 15.3 antibody. The samples were characterised using UV‐visible absorption spectroscopy (UV‐VIS Spectroscopy), Fourier transform infrared spectroscopy (FTIR), high‐resolution transmission electron microscopy (HRTEM) attached with energy‐dispersive X‐ray spectroscopy, phase contrast inverted epi‐fluorescence microscopy and photoluminescence (PL) spectrophotometry (EDS). The CdS‐QD showed a mean diameter of 3.02 ± 0.6 nm. The complex formed after antigen‐antibody interaction resulted in distinguishable optical and fluorescence intensity with respect to varying concentration of antigen. The PL study revealed that CA 15.3 antibody labelled CdS QD can detect CA 15.3 tumour marker even at very low concentration of 0.002 KU/L with a constant response time of 15 min. This study clearly indicates that detection of CA 15.3 at low concentration is possible using surface modified CdS QD in serum samples and can find immense applications in biosensor development for detection of breast cancer marker similar to various automated detection kits available in market.Inspec keywords: semiconductor quantum dots, cadmium compounds, II‐VI semiconductors, wide band gap semiconductors, cancer, tumours, optical sensors, biosensors, biomedical equipment, visible spectra, ultraviolet spectra, Fourier transform infrared spectra, transmission electron microscopy, X‐ray chemical analysis, fluorescence, optical microscopy, photoluminescence, proteins, molecular biophysics, nanosensors, nanomedicine, nanoparticlesOther keywords: optical detection, CA 15.3 breast cancer antigen, optical sensing, cadmium sulphide quantum dot, saline samples, serum samples, cysteamine capping, CA 15.3 antibody, UV‐visible absorption spectroscopy, Fourier transform infrared spectroscopy, high‐resolution transmission electron microscopy, energy dispersive X‐ray spectroscopy, phase contrast inverted epifluorescence microscopy, photoluminescence spectrophotometry, antigen‐antibody interaction, fluorescence intensity, optical intensity, CA 15.3 tumour marker, surface modified CdS QD, biosensor development, time 15 min, CdS     

Electrical properties of ZnSe-CdS alloy films

Thin films of ZnSe _x CdS_1–x (t 0.6 m) over the entire range of x, were deposited on glass substrates at two temperatures, T _s (350 and 470 K) by vacuum evaporation. X-ray diffraction studies showed that all the films were polycrystalline in nature. Films prepared at 470 K were nearly stoichiometric. Grain size increased with substrate temperature, T _s. The electrical conductivity and Hall measurements were carried out by d.c. van der Pauw technique. Hall effect studies/hot probe test showed that all the films were of n-type conductivity. Hall mobility increased with T _s. In addition, mobilities increased with temperature in films of all compositions, indicating the dominance of grain-boundary scattering. Grain-boundary potentials were in range 0.03–0.06 eV.     

Flexible amorphous‐silicon non‐volatile memory

Abstract— The development of a flexible, rewritable, non‐volatile memory (NVM) that is implemented on a standard, low‐temperature a‐Si:H process without additional mask steps is reported. This NVM is a part of a flexible‐display system. Each NVM cell is composed of differentially configured thin‐film‐transistors (TFTs). The cell reads out one of two stable states depending on the relative threshold voltages of the differentially configured TFTs. Information is stored in each cell by increasing the threshold voltage of one differential TFT or the other, utilizing the well‐known electrical‐stress degradation intrinsic to a‐Si:H TFTs. The stored information is retained indefinitely with no applied power. A test array of individually addressable NVM cells has been successfully fabricated and tested on flexible stainless‐steel substrates. Read and write operation, as well as preliminary reliability measurements, are described. The design is readily scalable to large memory arrays.