The relationship between umbilical artery Doppler findings, fetal biophysical score and placental inflammation in cases of premature rupture of membranes

BACKGROUND: To assess the relationship between placental inflammation, umbilical artery Doppler waveforms and fetal biophysical profile score, umbilical artery Doppler studies and fetal biophysical evaluations were performed in 24 preterm pregnants with premature rupture of membranes (PPROM). SUBJECTS: After delivery, the placentas were microscopically examined and two subgroups were formed including noninflamed or inflamed placentas. RESULTS: In the first group, which includes 14 cases with no histological signs of placental inflammation, we found increased systolic/diastolic ratio only in one patient, whereas in the second group including ten cases with microscopically proven inflammation, nine were found to have increased systolic/diastolic ratios (p < 0.05). Mean systolic/diastolic ratio in the first and the second groups were 2.74 +/- 0.18 and 4.64 +/- 0.93 respectively (p < 0.001). Mean biophysical profile score was 9 +/- 1.04 in the first group and 7 +/- 1.05 in the second group (p < 0.001). CONCLUSION: Abnormal biophysical profile scores along with increased arterial systolic/diastolic ratios have been shown to be the markers of impending clinical infection.     

Corrosion inhibition of stainless steel by polyaniline,poly(2-chloroaniline), and poly(aniline-co-2-chloroaniline) in HCl

Polyaniline (PANi), poly(2-chloroaniline) (PClANi), and poly(aniline-co-2-chloroaniline) (co-PClANi) films were synthesized by electrochemical deposition on 304-stainless steel (SS) from an acetonitrile solution. The structural properties of these polymer films were characterized by spectroscopic (FTIR and UV–vis) and electrochemical (cyclic voltammetry) methods. Open circuit potential–time (E_ocp–time) curves, potentiodynamic polarization, and electrochemical impedance (EIS) measurements showed that these films have significant protective performance against corrosion of SS in 0.5 M HCl solution. It was found that co-PClANi film has acted as a passivator as well as barrier for cathodic reduction reaction in a similar manner as PANi film. However, PClANi film has behaved only as barrier for corrosion protection of SS in 0.5 M HCl.     

Effect of the salt addition practice on the grain refining efficiency of Al–Ti–B master alloys

The impact of the salt addition practice on the microstructure and grain refining efficiency of Al–Ti–B alloys produced by the “halide salt” route was investigated. The grain refining performance of an experimental Al–5Ti–1B master alloy was optimized when the halide salts were pre-mixed before addition to aluminium melt at 800 °C during the production of the grain refiner. The stirring action provided during salt addition was found to degrade, while a high rate of addition was found to improve, the grain refining efficiency. In view of the above, an improved salt addition practice to ensure an exceptional grain refining performance is claimed to comprise the following steps: melting commercial purity aluminium ingot; addition of pre-mixed salts to molten aluminium at 800 °C, at once to facilitate a rapid salt reaction, gently mixing the salts with the aluminium melt without introducing any stirring. The grain refiner master alloy thus produced gives an average grain size of 102 μm 2 min after inoculation.     

An improved practice to manufacture Al–Ti–B master alloys by reacting halide salts with molten aluminium

The well-established “halide salt” route was employed in the present work to produce Al–Ti–B grain refiner alloys with consistent, good properties. The holding step in the production cycle was revised, however, to avoid oxidation of the molten alloy which is believed to be responsible for the relatively low Ti recoveries and thus for the inadequate and inconsistent grain refining efficiency. Stirring during holding was found to degrade the grain refining properties when molten potassium aluminium fluride salt was left on the molten alloy to avoid excessive oxidation. Likewise, holding temperatures higher than 800 °C and holding times longer than 30 min both had an undesirable effect on the grain refining performance. The experimental Al–5Ti–1B grain refiner alloy produced according to the present method provided consistent and better overall grain refining performance.     

Differentiating types of muscle movements using a wavelet based fuzzy clustering neural network

Abstract: The electromyographic signals observed at the surface of the skin are the sum of many small action potentials generated in the muscle fibres. After the signals are processed, they can be used as a control source of multifunction prostheses. The myoelectric signals are represented by wavelet transform model parameters. For this purpose, four different arm movements (elbow extension, elbow flexion, wrist supination and wrist pronation) are considered in studying muscle contraction. Wavelet parameters of myoelectric signals received from the muscles for these different movements were used as features to classify the electromyographic signals in a fuzzy clustering neural network classifier model. After 1000 iterations, the average recognition percentage of the test was found to be 97.67% with clustering into 10 features. The fuzzy clustering neural network programming language was developed using Pascal under Delphi.     

Treatment of olive mill wastewater by different physicochemical methods and utilization of their liquid effluents for biological hydrogen production

In this study various two-stage processes were investigated for biological hydrogen production from olive mill wastewater (OMW) by Rhodobacter sphaeroides O.U.001. Two-stage processes consist of physicochemical pretreatment of OMW followed by photofermentation for hydrogen production. Explored pretreatment methods were chemical oxidation with ozone and Fenton's reagent, photodegradation by UV radiation, and adsorption with clay or zeolite. Among these different two-stage processes, strong chemical oxidants like ozone and Fenton's reagent have the highest color removal (90%). However, their effluents were observed to be unsuitable for both hydrogen production and bacterial growth. On the other hand, clay treatment method was selected as the optimum process that allows fast and low-cost treatment as well as its effluent found to have the highest hydrogen production potential (31.5 m³ m^?3). Spent-clay regeneration was also investigated on the grounds that solid waste minimization is important for the overall efficiency of this process.     

Producing NiCrAl alloy by the SHS method for use in thermal spray powder manufacturing

A series of Ni alloys containing 36.15–44.54 wt.% Cr and 2.0–13.50 wt.% Al was synthesized by Self-Propagating High-Temperature Synthesis (SHS) using a mixture of NiO, Cr₂O₃ and Al powders in order to obtain low-cost starting materials for thermal spray powder production. The experiments were carried out with the addition of an excess stoichiometric amount of Al between 0 % and 30 %. Additions of CaO and CaF₂ were also done to remove sulfur from the alloy and to investigate the effect on metal recovery. Thermochemical simulations of the SHS processes were examined with the FactSage program. The products were characterized by chemical analysis, X-ray diffraction (XRD), electron probe microanalysis (EPMA) and microhardness techniques.     

Optical constants detection in tin dioxide nano-size layers by surface plasmon resonance investigation

Optical constants of tin dioxide nano-size layers were detected using surface plasmons resonance research technique. Squared reflectance indexes difference as well as the ones with s- and p-polarized light are measured simultaneously. Obtained in the work the refraction coefficient of the tin dioxide film gives the possibility to judge about the structural perfection of the layer and confirms that the film has significant porosity, which is created during the decomposition of the polymer materials used as structuring additives. It is shown that the resonance condition for surface plasmons may be destroyed through the interaction of surface plasmons with surface roughness potential of the film (medium dielectric properties variation).     

Mechanical properties of reactive powder concrete containing mineral admixtures under different curing regimes

Mechanical properties (compressive strength, flexural strength, and toughness) of reactive powder concrete (RPC) produced with class-C fly ash (FA) and ground granulated blast furnace slag (GGBFS) were investigated under different curing conditions (standard, autoclave and steam curing) in this study. Test results indicate that, compressive strength of RPC increased considerably after steam and autoclaving compared to the standard curing. On the other hand, it was observed that steam and autoclave curing decreased the flexural strength and toughness. Increasing the GGBFS and/or FA content improved the toughness of RPC under all curing regimes considerably. Furthermore, SEM micrographs revealed dense microstructure of RPC.