In-tube condensation of mixture of R134a and ester oil: empirical correlations

This paper presents a comparative study of the condensation heat transfer coefficients in a smooth tube when operating with pure refrigerant R134a and its mixture with lubricant Castrol “icematic sw”. The lubricant is synthetic polyol ester based oil commonly used in lubricating the compressors. Two concentrations of R134a-oil mixtures of 2% and 5% oil (by mass) were analysed for a range of saturation temperatures of refrigerant R134a between 35 °C and 45 °C. The mass flow rate of the refrigerant and the mixtures was carefully maintained at 1 g/s, with a vapour quality varying between 1.0 and 0. The effects of vapour quality, flow rate, saturation temperature and temperature difference between saturation and tube wall on the heat transfer coefficient are investigated by analysing the experimental data. The experimental results were then compared with predictions from earlier models [Int J Heat Mass Transfer (1979), 185; 6th Int Heat Transfer Congress 3 (1974) 309; Int J Refrig 18 (1995) 524; Trans ASME 120 (1998) 193]. Finally two new empirical models were developed to predict the two-phase condensation heat transfer coefficient for pure refrigerant R134a and a mixture of refrigerant R134a with Castrol “icematic sw”.     

Facial myokymia and spastic paretic facial contracture as the result of anaplastic pontocerebellar glioma

The case of a 36-year-old man who sought treatment of right facial myokymia and spastic paretic facial contracture is reported. Computed tomography and magnetic resonance imaging revealed a tumor located in the right cerebellar peduncle and the right dorsal pons bulging into the fourth ventricle. After microsurgical partial resection of the mass, which was verified histologically as an anaplastic glioma, facial myokymia initially ceased. The vermicular rippling movements were less intense upon recurrence and could be controlled by low-dose dexamethasone in the further course, when magnetic resonance imaging showed an interstitial pontine edema after percutaneous radiation therapy. It is assumed that facial myokymia and spastic paretic facial contracture were generated by ectopic activity due to alterations in the microenvironment at the intrapontine portion of the axons of the seventh nerve caused by the compressive effect of the tumor and later by edema.     

Biodegradation of chlorpyrifos by either single or combined cultures of some soilborne plant pathogenic fungi

Biodegradation of chlorpyrifos was studied in liquid culture media amended with either single or combined eight different plant pathogenic fungi isolated from the continuous cropping wheat fields. The average recovery of chlorpyrifos from the liquid media was found to be 86.1%. The detection limit of chlorpyrifos by the analytical method used was 19 ppb. Data showed that the growth of mixed fungi at concentrations up to 200 ppm of chlorpyrifos was higher than in the control treatment. Chlorpyrifos concentrations declined in the medium of combined fungi more than it did in the medium of any single fungus with increase in the incubation period. The amount of chlorpyrifos recovered was 79.8 ppm (39.9%) in the combined fungal cultures after 21 days. However, those recovered from the media of Fusarium graminearum, F. oxysporum, Rhizoctonia solani, Cladosporium cladosporiodes, Cephalosporium sp., Trichoderma viridi, Alternaria alternata, and Cladorrhinum brunnescens, ranged from 48.0 to 74.8%. The half-life value (T1/2) for chlorpyrifos was 15.8 day in the medium amended with mixed fungi. However, for the single cultures it ranged from 19.3 to 33.0 day.     

Modeling of Diffusion in Capillary Porous Materials During the Drying Process

This paper presents a model of heterogenous diffusion in capillary porous materials during the process of drying. The governing heat and mass transfer equations have been established using the liquid as well as vapor flow. Two models have been presented. Model 1 does not consider the heat conduction while the model 2 has been established by considering the conduction. The developed models and the numerical solutions of the resulting differential equations can take into account the moisture and temperature dependent thermophysical properties of the product. All equations have been established in spherical coordinates but the programme written for the purpose of calculations can be used for other geometries also. Numerical calculations have been performed for gas concrete and tiles using model 1, while model 2 has been used for gas concrete only because of the lack of data for thermophysical properties of the tile. For gas concrete it was seen that conduction has only marginal effect on the drying process and the numerical predictions of the drying process were reasonably accurate.     

Modeling and optimization of fringe capacitance of nanoscale DGMOS devices

We analyze the impact of gate electrode thickness and gate underlap on the fringe capacitance of nanoscale double-gate MOS (DGMOS) transistors. We propose an analytical fringe capacitance model considering gate underlap and finite source/drain length. A comparison with the simulation results show that the model can accurately estimate the fringe capacitance of the device. We show that an optimum gate underlap can significantly reduce the fringe capacitance resulting in higher performance and lower power consumption. Also, the effects of process variation in gate underlap devices are discussed. Simulation results on a three-stage ring oscillator show that with optimum gate underlap 32% improvement in delay can be achieved.     

Three-phase self-excited induction generators: an overview

Induction generators are increasingly being used in nonconventional energy systems such as wind, micro/mini hydro, etc. The advantages of using an induction generator instead of a synchronous generator are well known. Some of them are reduced unit cost and size, ruggedness, brushless (in squirrel cage construction), absence of separate dc source, ease of maintenance, self-protection against severe overloads and short circuits, etc. In isolated systems, squirrel cage induction generators with capacitor excitation, known as self-excited induction generators (SEIGs), are very popular. This paper presents an exhaustive survey of the literature over the past 25 years discussing the process of self-excitation and voltage buildup, modeling, steady-state, and transient analysis, reactive power control methods, and parallel operation of SEIG.     

Limit load analysis of strength undermatched welded T-joints under bending

An increasing amount of laser beam welded T‐joints (e.g. skin‐stringer) of aluminium alloys are now in use in advanced fuselage applications designed as ‘integral structures’ for weight and cost savings. It is known that weld joints generally show lower strength (undermatching) than base metal in both laser beam and friction stir welded joints of 6xxx series Al‐alloys. Damage tolerance considerations in terms of the residual strength of such joints require limit load solutions to be used in engineering fitness‐for‐service (FFS) analysis. The paper, therefore, provides an upper bound limit load solution in closed form for welded T‐joints (idealized) with strength undermatching and subject to a bending moment. In addition to the necessary requirements of the upper bound theorem, the kinematically admissible velocity field chosen leads to a stress field, which satisfies the equilibrium equations and some stress boundary conditions in the plastic zone. This is an advantage of the solution and, therefore, it is expected that the upper bound obtained is close to the exact limit load of such joints.     

Gastrointestinal autonomic nerve tumour presenting as small bowel volvulus: a rare disease with a rare presentation

A 78-year-old Chinese woman presented with recurrent postprandial abdominal pain. Computerised tomography revealed a small bowel tumour causing volvulus of a segment of the small bowel. Laparotomy confirmed an extraluminal ileal tumour with partial volvulus of the involved small bowel segment. Small bowel resection was done. Histological and ultrastructural studies confirmed a gastrointestinal autonomic nerve tumour. We review the medical literature on this rare tumour.     

Longitudinal bone mineral density changes in early rheumatoid arthritis

A prospective longitudinal study of patients with early RA was performed to examine the influence of disease duration, disease activity and physical activity on bone loss. Sixty-seven patients with non-steroid treated RA of less than 5 yr duration, including 16 patients with disease duration less than 6 months, had BMD measurements of the femoral neck and the lumbar spine over a 12-month period using dual energy X-ray absorptiometry. The BMD changes were compared with values from 72 control patients and were also correlated with serial measurements of disease activity (measured by the Stoke Index) and disability [measured by the Health Assessment Questionnaire (HAQ) score], at 3-monthly intervals over the 12-month period. No significant differences in BMD changes were found between RA patients and controls overall. Patients with disease duration of less than 6 months had significantly greater loss of BMD at the femoral neck (-3.9%, S.E.M. 1.5) than the remainder of the cohort (-0.2%, S.E.M. 0.7) (P = 0.02) and controls (-0.8%, S.E.M. 0.6). Lumbar spine BMD changes correlated with the initial Stoke Index (Rs-0.373, P = 0.01) but not mean Stoke Indices. There was no correlation of BMD changes with age or HAQ scores. These findings suggest that significant bone loss occurs within the first few months of disease in patients with RA.