Improved method for roadside barrier length of need modeling using real-world trajectories

The 2011 AASHTO Roadside Design Guide (RDG) contains perhaps the most widely used procedure for choosing an appropriate length of need (LON) for roadside barriers. However, this procedure has several limitations. The procedure uses a highly simplified model of vehicle departure, and the procedure does not allow designers to specify an explicit level of protection. A new procedure for choosing LON that addresses these limitations is presented in this paper. This new procedure is based on recent, real-world road departure trajectories and uses this departure data in a more realistic way. The new procedure also allows LON to be specified for a precisely known level of protection – a level which can be based on number of crashes, injury outcomes or even estimated crash cost – while still remaining straightforward and quick to use like the 2011 RDG procedure.     

In situ measurements of human cough aerosol hygroscopicity

The airborne dynamics of respiratory droplets, and the transmission routes of pathogens embedded within them, are governed primarily by the diameter of the particles. These particles are composed of the fluid which lines the respiratory tract, and is primarily mucins and salts, which will interact with the atmosphere and evaporate to reach an equilibrium diameter. Measuring organic volume fraction (OVF) of cough aerosol has proved challenging due to large variability and low material volume produced after coughing. Here, the diametric hygroscopic growth factors (GF) of the cough aerosol produced by healthy participants were measured in situ using a rotating aerosol suspension chamber and a humidification tandem differential mobility analyser. Using hygroscopicity models, it was estimated that the average OVF in the evaporated cough aerosol was 0.88 ± 0.07 and the average GF at 90% relative humidity (RH) was 1.31 ± 0.03. To reach equilibrium in dry air the droplets will reduce in diameter by a factor of approximately 2.8 with an evaporation factor of 0.36 ± 0.05. Hysteresis was observed in cough aerosol at RH = ∼35% and RH = ∼65% for efflorescence and deliquescence, respectively, and may depend on the OVF. The same behaviour and GF were observed in nebulized bovine bronchoalveolar lavage fluid.     

Discovery of Affinity-Based Probes for Btk Occupancy Assays

Bruton's tyrosine kinase (Btk) is an attractive target for the treatment of a wide array of B-cell malignancies and autoimmune diseases. Small-molecule covalent irreversible Btk inhibitors targeting Cys481 have been developed for the treatment of such diseases. In clinical trials, probe molecules are required in occupancy studies to measure the level of engagement of the protein by these covalent irreversible inhibitors. The result of this pharmacodynamic (PD) activity provides guidance for appropriate dosage selection to optimize inhibition of the drug target and correlation of target inhibition with disease treatment efficacy. This information is crucial for successful evaluation of drug candidates in clinical trials. Based on the pyridine carboxamide scaffold of a novel solvent-accessible pocket (SAP) series of covalent irreversible Btk inhibitors, we successfully developed a potent and selective affinity-based biotinylated probe 12 (2-[(4-{4-[5-(1-{5-[(3aS,4S,6aR)-2-oxo-hexahydro-1H-thieno[3,4-d]imidazol-4-yl]pentanamido}-3,6,9,12-tetraoxapentadecan-15-amido)pentanoyl]piperazine-1-carbonyl}phenyl)amino]-6-[1-(prop-2-enoyl)piperidin-4-yl]pyridine-3-carboxamide). Compound 12 has been used in Btk occupancy assays for preclinical studies to determine the therapeutic efficacy of Btk inhibition in two mouse lupus models driven by TLR7 activation and type I interferon.     

Lateral ion implant straggle and mask proximity effect

Lateral scattering of retrograde well implants is shown to have an effect on the threshold voltage of nearby devices. The threshold voltage of both NMOSFETs and PMOSFETs increases in magnitude for conventional retrograde wells, but for triple-well isolated NMOSFETs the threshold voltage decreases for narrow devices near the edge of the well. Electrical data, SIMS, and SUPREM4 simulations are shown that elucidate the phenomenon.     

Measuring College Students' Motives for Playing Drinking Games.

Students may choose to play drinking games not only for reasons related to alcohol consumption but also because of incentives related to other aspects of play (competition, fun, interpersonal dominance, etc.). College students (120 men and 167 women) completed measures of motives for playing (based on T. J. Johnson, S. Hamilton, & V. L. Sheets, 1999) and consequences of playing drinking games. Exploratory principal-components analysis identified 8 reasons for playing. Men and women differed in their endorsement of the factors. Motives for play directly predicted consequences of play independently of alcohol consumption. Specific motives predicted specific types of consequences. In multiple regression analyses, Conformity motives were negatively related to consequences and may represent a form of protective motive. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Mechanics of plain-woven fabrics for inflated structures

Pressurized fabric tubes, pressure-stabilized beams (known as air beams) and air-inflated structures are considered to be valuable technologies for lightweight, rapidly deployable structures. Design optimization of an inflated structure depends on a thorough understanding of woven fabric mechanics. In this paper the bending response of woven pressure-stabilized beams have been experimentally tested and analytically investigated. Additionally, the micromechanical effects of interacting tows have been studied through finite element models containing contact surfaces and nonlinear slip/stick conditions. Local unit cell models consisting of pairs of woven tows were created to characterize the effective constitutive relations. The material properties from the unit cell models were then used for the global continuum model subjected to 4-point flexure. An experimental set-up was designed and manufactured for testing of Vectran and PEN air beams. The air beam mid-span deflections were measured as functions of inflation pressure and bending load. Plots of the elastic and shear moduli with respect to the pressure and coefficient of friction have been generated. It was determined that the effective elastic and shear moduli were functions of inflation pressure, the material used and the geometry of the weave. It was shown that pneumatic or pressurized tube structures differ fundamentally from conventional metal structures.     

Intergranular corrosion of a light aircraft aluminum alloy propeller

Examination of the wreckage of a light aircraft revealed that approximately 20 cm was missing from one tip of the aluminum alloy propeller. Fractographic and metallographic examination of the remaining portion of the propeller revealed extensive grain-boundary separation in the vicinity of the fracture, and grain edges and corners rounded by corrosion on the fracture surface. Energy dispersive X-ray analysis (EDXA) revealed fluorine on, and in the vicinity of, the fracture surface. In the ensuing litigation, it was asserted that the crash occurred because the propeller fractured in flight as the result of intergranular attack caused by the use of a fluorine-bearing cleaner.     

Temporary leukocyte depletion reduces ventricular dysfunction during prolonged postischemic reperfusion

Leukocyte depletion improves early postischemic ventricular performance in neonatal models of global myocardial ischemia. However, the rate of leukocyte reaccumulation after cardiopulmonary bypass and its subsequent impact on myocardial function is not known. This laboratory study examined the effect of leukocyte depletion on myocardial performance during the initial 6-hour period after bypass in an in situ, in vivo porcine model of neonatal cardiac surgery. Fifteen 3- to 5-day-old piglets (eight control and seven leukocyte depleted animals) were instrumented by placement of left ventricular short-axis sonomicrometry crystals and an intraventricular micromanometer catheter. Mechanical leukocyte depletion was achieved with Pall RC100 filters (Pall Biomedical, Inc., Fajardo, Puerto Rico) in the cardiopulmonary bypass circuit. Neonatal hearts were subjected to 90 minutes of hypothermic ischemia after a single dose of cold crystalloid cardioplegia. Two control animals died after the operation and were excluded from data analysis. Leukocyte filtration reduced the granulocyte count during initial myocardial reperfusion to 0.8% of control values. However, circulating granulocyte counts increased in leukocyte depleted animals throughout the postoperative period, reaching 68% of control values by 6 hours. Despite this rapid return of circulating granulocytes, animals subjected to leukocyte depletion had significantly better preservation of left ventricular performance (measured by preload recruitable stroke work, p < or = 0.02), left ventricular systolic function (measured by end-systolic pressure-volume relationship, p < or = 0.05), and ventricular compliance (p < or = 0.04) during the experiment. These changes in ventricular function were associated with a significant increase in left ventricular water content (p < or = 0.02) and tissue myeloperoxidase activity (p < or = 0.005) in control animals compared with leukocyte depleted animals. This study demonstrates that leukocyte depletion during initial reperfusion results in sustained improvement in postischemic left ventricular function despite the rapid return of granulocytes to the circulation.