Particle Penetration through Inclined and L-Shaped Cracks

This paper presents a particle penetration model predicting particle penetration coefficient (Pp) through a narrow crack of arbitrary incline angles (θ). The objective was to simulate Pp for outdoor-to-indoor particle penetration for residential infiltration conditions. This model assumes laminar infiltration flow and considers particle deposition from both gravitational sedimentation and Brownian diffusion. For micron-sized particles, modeling results indicate that gravitational sedimentation is the major deposition mechanism. Pp increases monotonically with ∣θ∣ because effective particle sedimentation velocity (vs?cos?θ) decreases monotonically with ∣θ∣. For submicron-sized particles (0.1?μm), Brownian diffusion is the major particle deposition mechanism. Because Brownian diffusion is a nondirectional deposition mechanism, crack inclination did not affect Pp. This study applied this model to estimate Pp for L-shaped cracks, and validated modeling results with experiments. Experimental results indicated that inertial impaction and crack entrance cutoff effects were not significant particle deposition mechanisms for the test micron-sized particles. Gravitational sedimentation was the major deposition mechanism. An L-shaped crack can be simulated as the combination of horizontal and vertical sections. This model agreed reasonably with experimental results.     

Role of hepatic resection in surgery for bilateral intrahepatic stones

The effect of phenylephrine-induced reflex parasympathetic stimulation on QT interval and its dispersion was studied in 16 healthy subjects with a history of paroxysmal supraventricular tachycardia, both during sinus rhythm and during atrial pacing. Results demonstrate that rapid reflex parasympathetic stimulation does not influence QT interval duration or QT dispersion, and also emphasize the inappropriateness of Bazett's formula, the need for comparison of QT intervals during identical heart rates, and the importance of analyzing all 12 leads of a standard electrocardiogram when assessing the effects of various interventions on the QT interval.     

Parental bonding and mental health in adolescence

Attachment between parent and child plays a crucial role in the healthy development of the child. Accordingly disturbances in parental bonding will be linked with the development of mental disorders later in life. The present study examines the relationship between parental bonding and mental health in healthy adolescents. Participants were 847 Israeli high school students who completed the Parental Bonding Instrument (PBI), the Brief Symptom Inventory (BSI), the General Well-Being (GWB), the Perceived Social Support (PSS), and the Social Desirability scale (SDS). In general, Israeli adolescents reported more parental care and less control than did Australian adolescents and adults. Female subjects reported more maternal care than did males. Subjects who reported high care and low control (optimal bonding) reported less distress, better general well-being and better social support that did all other groups. In contrast, those who reported low care and high control (affectionless control bonding) had the highest BSI scores and the lowest GWB and PSS scores. These results are in line with Bowlby's theory of attachment. They also show that specific configuration of parental bonding are linked with distress and isolation in adolescents.     

Simulation of the pressure set-point change transient with the Kuosheng plant analyzer

The purpose of this paper is to simulate the pressure set-point change transient with the Kuosheng plant analyzer. The Kuosheng plant analyzer was developed for the Kuosheng nuclear power station based on the boiling water reactor plant analyzer of the Brookhaven National Laboratory and the Chinshan plant analyzer of the Taiwan Power Co. First, the pressure control system (PCS) model was verified on a stand-alone basis, with the sensed dome pressure test signal as the input variable. Then, a transient induced by a step change in the pressure set-point was simulated with the Kuosheng plant analyzer and compared with the test data. The predicted results of the main system variables showed good agreement with the test data-within 8% of the maximum relative deviation. In addition, the PCS performance of the Kuosheng nuclear power station was analyzed.     

Thin-gate oxides prepared by pure water anodization followed byrapid thermal densification

Anodic oxidation at room temperature with pure deionized water as electrolyte and then followed by high-temperature rapid thermal densification was used to prepare high breakdown endurance thin-gate oxides with thicknesses of about 50 Å. It was observed that the oxides prepared by anodic oxidation followed by rapid thermal densification (AOD) show better electrical characteristics than those grown by rapid thermal oxidation (RTO) only. The AOD oxides have a very low midgap interface trap density, Ditm, of smaller than 1×10¹⁰ eV^-1 cm^-2 and negative effective oxide trapped charge. From the smaller leakage currents observed during staircase ramp voltage time-zero dielectric breakdown (TZDB) and constant field time-dependent dielectric breakdown (TDDB) testings, it is supposed that the uniform interfacial property and the pretrapped negative charges in AOD oxides are responsible for the improved characteristics     

Experimental and analytical studies of innovative prestressed concrete box-girder bridges

This paper presents experimental and analytical results of four scaled prestressed concrete box-girder bridges with corrugated steel webs. The location of prestressing strands at both ends of the specimens and the thickness of end diaphragms are the two major parameters. Based on the experimental results of all four specimens, their seismic behavior is critically examined, including hysteretic loops, ductility factor, dissipated energy, and failure mode, etc. It was found that both the thickness of end diaphragms and the location of prestressing strands at both ends of the specimens are insignificant when the specimens failed at the mid-span due to concrete crushing, and the proposed analytical model can be used to predict the load-displacement relationship of such bridges.     

High density lipoprotein conversion mediated by human plasma phospholipid transfer protein

Phospholipid transfer protein (PLTP) was purified from lipoprotein-free human plasma, obtained upon treatment of plasma with dextran sulfate and Ca2+, by employing a series of column chromatography. Upon sodium dodecyl sulfate-polyacrylamide gel electrophoresis, the purified PLTP showed a single main band, corresponding to the molecular mass of 78 kDa. However, isoelectric focusing of the purified preparation gave multiple bands with pI ranging from 4.3 to 5.1, indicative of microheterogeneity. Purified PLTP was shown to possess not only phospholipid transfer activity, but also high density lipoprotein (HDL) conversion activity (Tu, A.-Y., Nishida, H. I., and Nishida, T. (1990), FASEB J. 4, A2148; Jauhiainen, M., Metso, J., Pahlman, R., Blomqvist, S., van Tol, A., and Ehnholm, C. (1993) J. Biol. Chem. 268, 4032-4036). Isolated HDL3 was enlarged to the size of HDL2b upon incubation with purified PLTP for 6 h at 37 degrees C at the PLTP/HDL3 molar ratio of approximately 1:45. Both the HDL conversion and the phosphatidylcholine transfer activities of purified PLTP were effectively inhibited by rabbit anti-PLTP immunoglobulin G. The primary importance of PLTP in the HDL enlargement that occurs in human plasma upon incubation at 37 degrees C was shown by the strong inhibitory effect of the anti-PLTP immunoglobulin G. The process of PLTP-mediated HDL enlargement was accompanied by the release of apoproteins, primarily apoA-I. HDL3 enlargement mediated by PLTP was effectively inhibited by the addition of free fatty acids.     

Effect of epitaxial realignment on the leakage behavior of arsenic-implanted,as-deposited polycrystalline Si-on-single crystal Si diodes

When dopants are indiffused from a heavily implanted polycrystalline silicon film deposited on a silicon substrate, high thermal budget annealing can cause the interfacial “native” oxide at the polycrystalline silicon-single crystal silicon interface to break up into oxide clusters, causing epitaxial realignment of the polycrystalline silicon layer with respect to the silicon substrate. Anomalous transient enhanced diffusion occurs during epitaxial realignment and this has adverse effects on the leakage characteristics of the shallow junctions formed in the silicon substrate using this technique. The degradation in the leakage current is mainly due to increased generation-recombination in the depletion region because of defect injection from the interface.