The influence of volume fraction of amorphous phase on corrosion resistance of Mg67Zn 29Ca 4 alloy

The aim of this study was to investigate the structure and corrosion resistance of amorphous, amorphous‐crystalline, and crystalline Mg₆₇Zn₂₉Ca₄ alloy for biodegradable applications. This paper presents a preparation method and results of the structural characterization and corrosion resistance analysis of the material. Samples were prepared in the form of 3 mm diameter rods. The structure of the alloy was examined with the use of X‐ray diffractometry and scanning electron microscopy. The thermal properties of the samples were examined with differential scanning calorimetry (DSC). Results of DSC analysis were used to determine heat treatment temperatures, allowing to obtain different fractures of crystalline phase in the material. Corrosion resistance of heat‐treated samples was investigated by immersion tests and electrochemical measurements performed in the simulated body fluid. The X‐ray diffraction results confirmed that the prepared Mg₆₇Zn₂₉Ca₄ alloy's structure is fully amorphous. After heat treatment, samples with different fractions of amorphous phase in the structure were obtained. Immersion tests of the samples showed that the structure significantly influenced corrosion resistance in examined materials. It should be pointed out, that certain amounts of crystalline phase in amorphous matrix can greatly improve the corrosion resistance of Mg₆₇Zn₂₉Ca₄ alloy.     

Thick film NO2 Sensor

 Thick film technology was used to manufacture a solid-state electrochemical nitrogen dioxide sensor. The prepared sensor has a linear dependence of electromotive force that is based in the NO₂ concentration level. This paper presents discussion on a thick-film sensor that has a much smaller dimension and shorter response time as compared to typical ceramic solid-state electrochemical devices. Received: 26 February 1996/Accepted: 27 June 1996     

Microstructure and Mechanical Properties of the Ductile Al–Ti–Mo–Nb–V Refractory High Entropy Alloys

Metallurgical and Materials Transactions A - A number of non-equimolar refractory high entropy alloys (RF HEAs) from the Al–Ti–Mo–Nb–V system are synthesized, with the...     

Novel conventional and chelating anion exchange resins with amino ligands for sorption of silver

ABSTRACT

The polymeric resins containing diethylenetriamine, tetraethylenepentamine, 2-(diethylamino)ethanol, 1-methylimidazole, and 1,2-dimethylimidazole ligands have been synthesized from vinylbenzyl chloride-divinylbenzene copolymers and used in the removal of Ag(I) from chloride solution. The best Ag(I) sorption was reached in the case of 1-methylimidazole resin. Resins retain their capacity towards Ag(I) in five consecutive sorption/desorption cycles. The resins with imidazole ligands were highly selective for Ag(I) from synthetic chloride solution and they did not sorb chloride complexes of Cu(II). Additionally, the recovery of Ag(I) was tested from real chloride solution coming from leaching of the copper concentrate from Lubin Concentrator (KGHM Polska Mied? S.A.).     

Psychosocial aspects of children and families treated with hemodialysis

Introduction: The aim of this study was to analyze the selected psychosocial aspects of chronic kidney disease in children treated with hemodialysis (HD). Methods: The study included 25 children treated with HD aged 2 to 18 years and their parents. Data concerning the illness and socio‐demographic parameters was collected. We used the Paediatric Quality of Life Inventory (PedsQL) for patients and for their parents the PedsQL‐proxy version, General Health Questionnaire (GHQ‐12), Berlin Social Support Scales (BSSS), and the Caregivers Burden Scale (CBS) to evaluate health‐related quality of life (QoL) of HD children and their primary caregivers. Findings: In the PedsQL test, the QoL of HD children was lower than in healthy children. Children treated with HD assessed their QoL on the PedsQL questionnaire higher than the primary caregivers, on all subscales as well as an overall health‐related QoL. Scoring below 2 on the GHQ‐12 test was reported in 56% of mothers, which may indicate that psychological symptoms have intensified. There was no correlation between BSSS, CBS, and GHQ‐12. Discussion: The assessment of QoL in pediatric patients would allow for the earliest possible identification of their nonsomatic problems and irregularities. This could, consequently, contribute to improving QoL in both children with chronic kidney disease and their families.     

A Chamber for Testing the Release of Volatile Substances Secreted by Animals,Especially Mammals,as Exemplified by Substances Released by Rats in Response to Stress

Abstract

The success of the testing of volatile organic compounds emitted by animals is dependent on the creation of appropriate conditions for air sampling subsequently used to assay and identify the compounds. These conditions play a particularly important role in the investigation of pheromones, which are secreted in extremely low concentrations. The authors have not come across any previous work which offers constructional solutions, which would allow avoidance of contamination of the air samples containing volatile substances secreted by animals.

A constructional solution was developed, which provides optimal conditions for their sampling and isolation. Its main advantages are as follows: the exposure chamber (the chamber in which the animal is studied) is filled with synthetic air; the exposure chamber is separated from the atmospheric air with a synthetic air “jacket”; the exposure chamber has been constructed using materials which do not release chemicals and absorb them in trace quantities.     

In vitro culture of Boletus badius as a source of indole compounds and zinc released in artificial digestive juices

Food Science and Biotechnology - The objective of this study was to obtain the in vitro cultures of Boletus badius under controlled conditions and investigate the release of indole compounds and...     

Microwave-assisted synthesis and characterization of bioactive chitosan scaffolds doped with Au nanoparticles for mesenchymal stem cells culture

In this work we present a novel strategy for chitosan-based scaffolds. Chitosan is a versatile biopolymer obtained from waste biomass known of its favorable biological properties. Thus it can replace other polymers in the preparation of bioactive scaffolds. To increase its durability chitosan can be crosslinked into form of the hydrogel yet application of toxic crosslinkers may lead to loss of biocompability. Mesenchymal stem cells can be used in cell therapy for advanced wound treatment. However their culture requires special biomaterials application. In this article a novel microwave-assisted synthesis method for bioactive chitosan scaffolds is presented.