Effects of vasodilators and perfusion pressure on coronary flow and simultaneous release of nitric oxide from guinea pig isolated hearts

OBJECTIVE: The aims were to validate the use of a direct reading NO electrode, to compare the effects of diverse acting drugs on altering coronary flow (CF) and NO release, and to examine the effects of altered perfusion pressure on flow-induced changes in NO concentration [NO] in the hemoglobin free effluent of guinea pig isolated hearts. METHODS: Hearts were isolated and perfused initially at a constant perfusion pressure (55 mmHg) with a modified Krebs-Ringer's solution equilibrated with 97% O2 and 3% CO2 at 37 degrees C. Heart rate, left ventricular pressure, CF, and effluent pH, pCO2, pO2, and NO generated current were monitored continuously on-line. Effluent was sampled for L-citrulline. Percent O2 extraction and O2 consumption were calculated. [NO] was quantitated with a sensitive amperometric sensor (sensitivity > or = 1 nmol/l approximately 3 pA) and a selective gas permeable membrane. RESULTS: The electrode was not sensitive to changes in solution pO2, flow, or pressure. The electrode was sensitive to pCO2 (-0.50 nmol/l/mmHg) and temperature (+24.5 nmol/l/degree C), so coronary effluent pCO2 was measured to compensate for a small decrease in pCO2 that occurred with an increase in coronary flow, and effluent temperature was rigidly controlled. Serotonin, bradykinin, and nitroprusside increased NO release along with CF, whereas nifedipine, butanedione monoxime, zaprinast, and bimakalim comparably increased CF but did not increase [NO] or NO release. Increases in CF (ml/g/min) and NO release (pmol/g/min), respectively, were 5.0 +/- 1 and 100 +/- 17 for 1 mumol/l serotonin, 7.5 +/- 1 and 148 +/- 18 for 100 nmol/l bradykinin, and 7.8 +/- 1 and 173 +/- 28 for 100 mumol/l nitroprusside. The increases in effluent NO by bradykinin were proportional to the increases in L-citrulline. Tetraethylammonium decreased CF, but did not change NO release, indomethacin changed neither CF nor NO release, and NG-nitro-L-arginine methyl ester (L-NAME) reduced CF by 2.6 +/- 1 ml/g/min and NO release by 25 +/- 8 pmol/g/min. An increase of CF of 8.0 +/- 0.3 ml/g/min, produced by increasing perfusion pressure from 25 to 90 mmHg, increased [NO] by 30 +/- 4 nmol/l; L-NAME but did not reduce the pressure-induced increase in CF, but reduced the increase in [NO] to 10 +/- 5 nmol/l. CONCLUSIONS: This study demonstrates in intact hearts real-time release of NO by several vasodilator drugs and by pressure-induced increases in flow (shear stress) and attenuation of these effects by L-NAME.     

Water-Quality Monitoring in Anguilla

Anguilla is a UK overseas (non-independent) territory in the Caribbean. It is a small middle-income island with a population of 13 000, and recent statistics indicate that it is more dependent on tourism than any other country or territory in the world. Rapid population growth and development have placed more emphasis on the need for human health and environmental protection. For the first time, a systematic water-quality monitoring programme has been developed, based on the realities of the local situation, e.g. low resource base, limited capabilities, dependence on household rainwater catchment, storage cisterns, and a poor water-supply network. Development of the programme incorporated the key themes of pragmatic, realistic, incremental, responsive, and consultative approaches.     

Analysis of a stiffener intersection eccentricity in a steel containment

Containment structures have several regions in which the continuity of the cylindrical pressure boundary is interrupted, e.g., shell penetrations, discontinuous stiffeners, and changes in the shell thickness. Significant strain concentrations can occur in these areas of discontinuity. The Sandia National Laboratories 1:8-scale steel containment equipment hatch was analyzed as an example of an eccentricity at a stiffener intersection.A portion of the as-built 1:8-scale model was modeled with the ANSYS general purpose finite element program using triangular, thin shell finite elements. The overall size of the model was determined from Saint-Venant type considerations of the stress field around the hatch. Shell elements were used to model the ring and formed stiffeners. Geometric and material nonlinear behavior were included. The model was loaded using discrete load steps up to a pressure of 165 psig. At this pressure, the maximum strain was 19.7 percent in the formed stiffener near its intersection with the ring stiffener. The finite element solution demonstrated the very localized nature of the strain field near the ring/formed stiffener intersection.In an attempt to reduce analysis costs, a small portion of the 1:8-scale model immediately surrounding the ring/formed stiffener intersection was selected for further analysis. Two smaller models, a ring/formed stiffener intersection and a ring/circular stiffener intersection, were studied. The models were significantly smaller than the regions used previously. A comparison of the two intersection models showed that the circular stiffener is a more efficient configuration.     

Structural characterisation of apatite coatings

The current, most frequently employed, commercial route to produce hydroxyapatite prosthetic coatings is plasma spraying. However, this has several important limitations especially for textured surfaces. Low temperature methods of coating fabrication such as cathodic electrodeposition are attractive alternatives. However, quantitative characterisation of the phase composition of thin electrodeposited coatings can be problematic. An X-ray diffraction method, which provides quantitative compositional information without reference to external or internal standards, is introduced and validated. The method can also be applied when Bragg peaks from the supporting substrate are apparent within the data and preferred orientation can be tolerated. This method has been used to examine in detail the microstructure of electrodeposited coatings which are compared directly with those formed by a commercial plasma spraying process.We show that, unlike the plasma sprayed coatings, the electrodeposited material consists of a single crystalline phase (hydroxyapatite) and a significantly reduced amorphous phase. The electrodeposited coatings also possess significantly more microstrain and a smaller crystallite size than the corresponding plasma sprayed material.     

Characteristics of Milk Powders Produced by Spray Freeze Drying

Skim and whole milk powders were manufactured at lab scale by spray freeze drying (SFD), using liquid nitrogen as the cryogen. The polydispersity of droplet/particle sizes was limited using an encapsulator nozzle to atomize the feed. Particle morphology was examined using a scanning electron microscope. Samples were compared with equivalent spray-dried powders in tests of wettability and dissolution in water. The spray freeze-dried powders were found to be highly porous, with a uniform structure of pores throughout the entire particles. When tested in water, SFD skim milk powders wetted roughly three times as fast as industrially spray-dried agglomerated skim milk powders and were observed to dissolve rapidly by breaking down into smaller particles.     

A role for Edman degradation in proteome studies

Advances in protein database design and the software used to access the sequence data has led to progress in using protein attributes such as amino acid composition and peptide masses to identify proteins separated by two-dimensional electrophoresis. However, Edman degradation remains the principal technique for protein identification and it presents a significant bottleneck in the progress towards rapid protein identification. Simple modifications to the sequencing hardware, which automate the delivery of protein spots into the sequencer, and parallel sequencing of the protein spots represent a significant advance in the use of Edman degradation to rapidly generate the powerful protein attribute, an N-terminal sequence tag.     

System requirements for Ka-band Earth-satellite propagation data

Accurate estimates of the propagation impairments that affect link quality and availability and determine signal interference fields are essential for the reliable design of telecommunication systems and the efficient use of the electromagnetic spectrum. Recent announcements by commercial entities of their intent to use Ka-band spectrum to supply satellite services have heightened interest in propagation data and models for these frequencies. This paper provides a brief overview of Ka-band Earth-satellite systems and requirements in relation to the need for specific types of propagation data     

Analysis of immunoglobulin-synthesizing cells in human dental periapical lesions by in situ hybridization and immunohistochemistry

The iron status of 22 children and adolescents with Crohn's disease (mean age: 13 years) was evaluated. Eleven patients were suffering from active disease with inflammation, identified by at least one abnormal value for serum orosomucoid, C-reactive protein or sedimentation rate (group I). Eleven patients were in clinical remission and showed no biological evidence of inflammation (group II). Hemoglobin and red cell indices, erythrocyte protoporphyrin, serum iron, transferrin, serum ferritin and basic red cell ferritin were determined in all patients. The usual indicators of iron status, particularly serum ferritin, were affected by the inflammatory processes, but basic red cell ferritin appeared to be independent of inflammation. Basic red cell ferritin can therefore be considered to be a reliable indicator of iron status in children and adolescents with Crohn's disease.     

Translational research models in neuro-oncology

Tumor development and progression in the nervous system are poorly understood. Consequently, even though there seems to be little possibility of major advances in existing clinical modalities used to treat malignant brain tumors, no targeted molecular therapies have risen to take their place. The variability and plasticity of brain neoplasms make them an illusive target for study and therapeutic intervention. Further complicated by infiltration of vital nervous tissue, clinical studies have serious practical limitations and the ability to assess tumor progression in vivo is still a developing technology. Evaluation of potential new therapies for brain tumors is heavily dependent on the development of more informative and cognate experimental models. To develop and validate new models, it is particularly important to integrate clinical, pathological, and cell biological characterizations of malignant brain tumors. This discussion provides an overview of developments in tumor cell culture and the impact of animal models on brain tumor research. Studies of malignant glial neoplasms associated with a dismal prognosis in patients receive particular attention.