Microbeam RBS on flat panel displays

We have demonstrated the utility of microbeam-Rutherford BackScattering (μ-RBS) in spatially resolved studies of operational plasma effects on the interior surfaces of plasma flat panel displays manufactured by Photonics Imaging. The experiments were performed at the Sandia Nuclear microprobe using a 2.8 MeV He beam with an average beam spot size of less than 8 μm. The interior surface of the top panes of the flat panels is composed of approximately 800 nm of MgO on top of a 2000 nm thick PbO layer. μ-RBS of sample panels operated under varying conditions measured changes in the surface MgO film thickness due to plasma erosion and redeposition as accurately as ± 1.5 nm. The high accuracy in the MgO thickness measurement was achieved by inferring the MgO thickness from the shift of the Pb front edge in the RBS spectrum. An estimate for the thickness accuracy as a function of the acquired statistics is presented. The surface of the flat panels' bottom panes is also comprised of MgO on top of PbO. However, troughs 100 μm wide by 10 μm deep were partially filled with phosphor and cover the entire width of the surface. This leaves only 100 μm long sections of MgO within the trough exposed. Using μ-RBS, we were able to analyze the surface composition of these regions.     

Multiple solution conformations of the integrin-binding cyclic pentapeptide cyclo(-Ser-D-Leu-Asp-Val-Pro-). Analysis of the (phi, psi) space available to cyclic pentapeptides

The aqueous solution structure of the cyclic pentapeptide cyclo(-Ser-D-Leu-Asp-Val-Pro-) has been determined by two-dimensional 1H-NMR spectroscopy, combined with a conformational search and distance-geometry calculations. As many as five conformers in slow exchange were observed, and the rate of interconversion between components was measured from the build-up rates of exchange peaks. NMR data allowed the structures of the two predominant conformers to be determined. The major component (66%) contained a cis-proline as part of a type-VIa2 beta-turn encompassing residues Asp-Val-cis-Pro-Ser. The second component (16%) contained only trans-amide bonds, and a type-VIII beta-turn formed by residues Val-Pro-Ser-D-Leu. These structures are discussed in relation to the (phi, psi), space available to the cyclic pentapeptide, determined by a conformational search, and in relation to previously published cyclic-pentapeptide structures. The molecule exhibits activity in a scintillation-proximity assay for the inhibition of the interaction between the integrin very-late antigen-4 (VLA-4; alpha 4 beta 1) and vascular-cell-adhesion molecule-1 (VCAM-1). The structure/activity relationship of the LDV sequence is discussed and related to the recently published X-ray structure of VCAM-1. The relevance of the work to the design of anti-inflammatory drugs is discussed.     

The Subjective and Reinforcing Effects of Visual and Olfactory Stimuli in Alcohol Drinking.

Nonpharmacological cues associated with drug intake may influence subjective and reinforcing effects of those drugs. Social drinkers (N = 80) participated in 2 sessions in which they rated and then consumed ad lib their preferred beer (with participants blind to brand). Visual and olfactory stimuli were obscured during 1 session (blocked) and not obscured during the other (unblocked). Dependent measures included ratings of "liking", "want another", and "desire to drink"; subjective mood; and ad lib beer consumption (reinforcement). Most ratings and ad lib consumption were lower during the blocked versus the unblocked condition. There were no interactions of blockade condition with sex and no effect of blockade on mood. These findings show that nonpharmacological stimuli associated with alcohol consumption influence alcohol's subjective and reinforcing effects. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Plasma immersion ion implantation for SOI synthesis: SIMOX and ion-cut

We have demonstrated feasibility to form silicon-on-insulator (SOI) substrates using plasma immersion ion implantation (PIII) for both separation by implantation of oxygen and ion-cut. This high throughput technique can substantially lower the high cost of SOI substrates due to the simpler implanter design as well as ease of maintenance. For separation by plasma implantation of oxygen wafers, secondary ion mass spectrometry analysis and cross-sectional transmission electron micrographs show continuous buried oxide formation under a single-crystal silicon overlayer with sharp Si/SiO₂ interfaces after oxygen plasma implantation and high-temperature (1300°C) annealing. Ion-cut SOI wafer fabrication technique is implemented for the first time using PIII. The hydrogen plasma can be optimized so that only one ion species is dominant in concentration and there are minimal effects by other residual ions on the ion-cut process. The physical mechanism of hydrogen induced silicon surface layer cleavage has been investigated. An ideal gas law model of the microcavity internal pressure combined with a two-dimensional finite element fracture mechanics model is used to approximate the fracture driving force which is sufficient to overcome the silicon fracture resistance.     

Ionoluminescence decay measured with single ions

A new ion beam analysis-based, single ion technique called the time to first photon has been developed to measure the decay of the luminescence signal of phosphors. Such measurements are currently needed to study luminescence decay mechanisms following high-density excitations and to identify strongly luminescent phosphor coatings with short lifetimes for ion photon emission microscopy (IPEM). The samples for this technique consist of thin phosphor layers placed or coated on the surface of PIN diodes. Single ions from an accelerator strike this sample and simultaneously create ion beam induced luminescence (IBIL) from the phosphor that is measured by a single-photon-detector, and an ion beam induced charge collection (IBICC) signal in the PIN diode. In this case, the IBICC signal provides the start pulse and the IBIL signal the stop pulse to a time to amplitude converter. It is straightforward to show that this approach also measures a signal proportional to activity versus time with an accuracy of 5% as long as the number of detected photons per ion is less than 0.1, which usually requires the use of absorbers for the IBIL detector or electronic discrimination for the IBIL signals. Details of the new analysis are given together with examples of luminescence decay measurements of several ceramic phosphors being considered to coat IPEM samples. IPEM is currently being developed at Sandia National Laboratory (SNL), the University of North Texas in Denton, and the Universities and INFN of Padova and Torino.     

Intracerebroventricular administration of neuropeptide Y to normal rats increases obese gene expression in white adipose tissue

Dose planning programs originally intended for use with symmetric fields have been adapted for use with asymmetric fields. An accurate representation of the change in primary beam quality with off-axis distance and depth is essential for accurate dose calculation and is usually represented in the computer as a primary radiation profile or primary off-center ratio (POCR). The original field edge correction (FEC) method described by Cadman [Med. Phys. 22, 457 (1995)] to determine POCRs has been extended to allow accurate POCR values to be obtained to an off-axis distance defined by the corners of the largest field, typically at an off-axis distance of 28.3 cm. This technique requires only routine symmetric field measurements including beam profiles, TMRs, and collimator and phantom scatter factors. The POCRs obtained using the FEC technique were used to generate off-center ratios (OCRs) using the boundary factor technique of Chui et al. [Med. Phys. 15, 92 (1988)]. Excellent agreement with measured values was obtained for cross-beam OCRs using a 10 x 10-cm2 field defined by a single set of asymmetric jaws with a field center offset of 15 cm and for diagonal OCRs using a 20 x 20-cm2 field with each pair of jaws in a half-blocked configuration.