Atomistic simulations of grain boundary migration in copper

While the motion of twist boundaries can be readily studied by atomistic simulations with molecular dynamics (MD) under the action of an elastic driving force, the approach fails for tilt boundaries. This is due to the interaction of the elastic stress with the grain boundary (GB) structure, which causes plastic strain by GB sliding. A novel concept, the orientation correlated driving force, is introduced to circumvent this problem. It is shown that this concept can be successfully applied to the study of the migration of tilt boundaries. The migration behavior of several twist and tilt GBs was investigated. The transition from low-to high-angle boundaries can be captured, and a structural transition of tilt boundaries was found at high temperatures, which also affected the migration behavior. The results compare well with experimental results of the motion high-angle boundaries, but for low-angle boundaries, the agreement is poor. This article is based on a presentation made in the “Hillert Symposium on Thermodynamics & Kinetics of Migrating Interfaces in Steels and Other Complex Alloys,” December 2–3, 2004, organized by The Royal Institute of Technology in Stockholm, Sweden.     

Sensor guided handling and assembly of active micro-systems

Positioning accuracies in the range of a few micrometers and below are necessary for the assembly of active micro-systems. In order to reach these accuracies, an assembly system for sensor guided micro-assembly is developed in the Collaborative Research Centre 516 “Design and manufacturing of active micro-systems”. The combination of a parallel robot with an integrated 3D vision sensor and a micro-gripper enables to reach relative positioning accuracies below 1 μm.     

Surfactant replacement therapy in acute respiratory distress syndrome from viral pneumonia

A modified natural surfactant was administered to a patient with life-threatening adult respiratory distress syndrome caused by viral pneumonia. Subsequently, there was a marked improvement in gas exchange. In order to assess the mechanism for improved oxygenation, computed tomography of the lungs was done. Quantitative analysis of the scans taken before and after surfactant administration indicates that improvement in gas exchange was largely due to the expansion of underinflated and collapsed lung areas. Although this is a single case report, it provides insight into the possible beneficial effect of instilled surfactant in severe respiratory distress from viral pneumonia.     

Growth Stresses in the Oxide Scales on TiAl Alloys at 800 and 900°C

In the oxidation of TiAl alloys, the role of scale-growth stresses formed during oxidation has, thus far, been unknown. In the present paper the oxide-growth stresses were investigated by the deflection-test method in monofacial oxidation (DTMO) accompanied by acoustic-emission measurements. On unmodified surfaces the growth stresses are compressive and reach levels of around –100 MPa. At the same time, significant acoustic emission occurs indicating that even under isothermal conditions, stresses are relieved by a scale-cracking mechanism. For oxide scales on TiAl surfaces, which had been ion implanted with chlorine before oxidation, a very thin protective alumina layer is formed which, however, develops growth stresses in the range of several GPa, accompanied by intensive acoustic emission. In all stress–time curves, a dynamic situation is observed. This consists of phases of stress relief by scale microcracking and phases of stresses increase due to crack healing and further oxide growth. As a result, the level of stress as a function of oxidation time, is characterized by an oscillating course.     

Thomas Fincke und die <Emphasis Type="Italic">Geometria rotundi</Emphasis>

Thomas Fincke (January 6^th, 1561–April 24^th, 1656), born in Flensburg (Germany), was one of the very most important and significant scientists in Denmark during the seventeenth century, a mathematician and astrologer and physician in the beginning of modern science, a representative of humanism and an influentual academic organizer. He studied in Strasbourg (since 1577) and Padua (since 1583) and received his M.D. in Basel (1587), he practised as a physician throughout his life (since 1587 or 1590) and became a professor at Copenhagen (1591). But he was best known because of his Geometriae rotundi libri XIIII (1583), a famous book on plane and spherical trigonometry, based not on Euclid but on Petrus Ramus. In this influentual work, in which Fincke introduced the terms tangent and secant and probable first noticed the Law of Tangents and the so-called Newton-Oppel-Mauduit-Simpson-Mollweide-Gauss-formula, he showed himself to be „abreast of the mathematics of his time“.      

Applications of the discrete element method in mechanical engineering

Compared to other fields of engineering, in mechanical engineering, the Discrete Element Method (DEM) is not yet a well known method. Nevertheless, there is a variety of simulation problems where the method has obvious advantages due to its meshless nature. For problems where several free bodies can collide and break after having been largely deformed, the DEM is the method of choice. Neighborhood search and collision detection between bodies as well as the separation of large solids into smaller particles are naturally incorporated in the method. The main DEM algorithm consists of a relatively simple loop that basically contains the three substeps contact detection, force computation and integration. However, there exists a large variety of different algorithms to choose the substeps to compose the optimal method for a given problem. In this contribution, we describe the dynamics of particle systems together with appropriate numerical integration schemes and give an overview over different types of particle interactions that can be composed to adapt the method to fit to a given simulation problem. Surface triangulations are used to model complicated, non-convex bodies in contact with particle systems. The capabilities of the method are finally demonstrated by means of application examples. Commemorative Contribution.     

Developmental and light-dependent changes of the cytosolic chaperonin containing TCP-1 (CCT) subunits in maize seedlings, and the localization in coleoptiles

The cytosolic chaperonin containing TCP-1 (CCT) is known to keep fold cytoskeletal proteins and is involved in the proper organization of the cytoskeleton. These studies are based on the assumption that growth responses linked to structural rearrangement of the plant cytoskeleton include the action of CCT and the need for newly synthesized tubulin. The presence of the alpha- and epsilon-subunits of CCT was investigated in soluble fractions of protein extracts from maize mesocotyls and coleoptiles at distinct growth stages. The CCT-subunits, tubulins and actin decreased in the coleoptile in response to far-red light. In addition, independent from light treatment, the amount of CCT epsilon abundance declined with age in coleoptiles and mesocotyls between 2 and 4.5 days after sowing. In contrast to CCT epsilon, no significant light regulation of CCT alpha was found in the mesocotyl. In two day old, light-grown rapidly elongating coleoptiles part of the CCT alpha subunit and the bulk of actin and tubulin was found shifted into fractions of high molecular weight complexes when compared to slowly elongating, dark grown coleoptiles. In 4.5 day old, etiolated and elongating coleoptiles, part of both CCT-subunits and cytoskeleton proteins were found in fractions of high molecular weight. A complete disappearance of these polypeptides was observed in old far-red irradiated growth-arrested coleoptiles. CCT epsilon was found to be colocalized to microtubular structures and to the nucleus. We conclude from our data that abundance of CCT-subunits in soluble extracts is dependent on age and light treatment, but independent from the growth stage of mesocotyl and coleoptile.