Equal-channel angular extrusion of beryllium

The equal-channel angular extrusion (ECAE) technique has been applied to a powder metallurgy (P/M) source Be alloy. Extrusions have been successfully completed on Ni-canned billets of Be at approximately 425°C. No cracking was observed in the billets, and significant grain refinement was achieved. In this article, microstructural features and dislocation structures are discussed for a singlepass extrusion, including evidence of <c> and <c+a> dislocations. Significant crystallographic texture developed during ECAE, which is discussed in terms of this unique deformation processing technique and the underlying physical processes which sustain the deformation. S.R. AGNEW, formerly with the Oak Ridge National Laboratory, Oak Ridge, TN 37831-6115 This article is based on a presentation made in the symposium entitled “Defect Properties and Mechanical Behavior of HCP Metals and Alloys” at the TMS Annual Meeting, February 11–15, 2001, in New Orleans, Louisiana, under the auspices of the following ASM committees: Materials Science Critical Technology Sector, Structural Materials Division, Electronic, Magnetic & Photonic Materials Division, Chemistry & Physics of Materials Committee, Joint Nuclear Materials Committee, and Titanium Committee.     

Gelsolin is a downstream effector of rac for fibroblast motility

Rac, a member of the rho family of GTPases, when activated transmits signals leading to actin-based membrane ruffling in fibroblasts. Compared with wild-type fibroblasts, gelsolin null (Gsn-) dermal fibroblasts have a markedly reduced ruffling response to serum or EGF stimulation, which signal through rac. Bradykinin-induced filopodial formation, attributable to activation of cdc42, is similar in both cell types. Wild-type fibroblasts exhibit typical lamellipodial extension during translational locomotion, whereas Gsn- cells move 50% slower using structures resembling filopodia. Multiple Gsn- tissues as well as Gsn- fibroblasts overexpress rac, but not cdc42 or rho, 5-fold. Re-expression of gelsolin in Gsn- fibroblasts by stable transfection or adenovirus reverts the ruffling response, translational motility and rac expression to normal. Rac migrates to the cell membrane following EGF stimulation in both cell types. Gelsolin is an essential effector of rac-mediated actin dynamics, acting downstream of rac recruitment to the membrane.     

Development and characterization of a biocompatible OH-modified copolymer based on polyurethane

Different polyurethanes were synthesized by varying the diol as well as the diisocyanate components and chain extenders. Polyurethanes with OH-groups were obtained by photo- and thermoinitiation of the radical polymerization of hydroxy alkyl acrylates in the presence of the polyurethanes. The polymers were evaluated with respect to their biocompatibility by measuring the cell spreading, the rates of DNA- and protein synthesis and the swelling behaviour. The differences in the surfaces and the bulks between the selected basic polyurethane and the functionalized modification were determined and characterized by XPS, FTIR-ATR and ¹³C-FT-NMR-spectroscopy. The mechanical data of Tecoflex EG 60D® and Pellethane 2363–80AE® were compared with the data of the synthesized polyurethanes.     

Syntheses and reactions of urethanes of cellobiose and cellulose-containing uretdione groups

Urethanes of cellobiose and cellulose-containing uretdione groups are synthesized by the reaction of aliphatic and aromatic diisocyanate uretdiones with the saccharides. The syntheses are performed as a heterogeneous reaction in dimethyl acetamide using dibutyl tin dilaurate as a catalyst, as well as a homogeneous reaction in dimethyl acetamide-lithium chloride. Thus, Semisynthetic prepolymers are formed that offer the reactivity of (blocked) isocyanate groups. To demonstrate their reactivity, ring opening of the uretdiones is performed by the addition of a secondary amine to yield the corresponding ureas.     

The effect of temperature and extrusion speed on the consolidation of zirconium-based metallic glass powder using equal-channel angular extrusion

In this study, gas-atomized amorphous Zr_58.5Nb_2.8Cu_15.6Ni_12.8Al_10.3 (Vitreloy 106a) containing 1280 ppmw oxygen was consolidated by equal-channel angular extrusion (ECAE). The powder was vacuum encapsulated in copper cans and subjected to one extrusion pass in the temperature region above the glass transition temperature (T _g) and below the crystallization temperature (T _x). The effects of extrusion temperature and the extrusion rate on microstructure, thermal stability, hardness, and compressive strength are investigated. Compression fracture surfaces were examined to determine the deformation mechanisms. The consolidates in which the time-temperature-transformation (TTT) boundary was not crossed during processing exhibit differential scanning calorimetry (DSC) patterns similar to the initial powder, with a slight decrease in T _x. Compressive strengths of about 1.6 GPa are recorded in the consolidates processed at 30 °C and 40 °C below T _x, which is close to what is observed in cast counterparts. The fracture surfaces exhibit vein patterns covering up to 90 pct of the surface area in some samples, which are characteristic of glassy material fracture. The slight decrease in T _x after consolidation is attributed to thermal-history-dependent short-range order and formation of nanocrystalline islands. The present results show that ECAE is successful in consolidation of metallic glass powder. This processing avenue opens a new opportunity to fabricate bulk metallic glasses (BMGs) with dimensions that may be impossible to achieve by casting methods.     

Flammability of layered silicate epoxy nanocomposites combined with low‐melting inorganic ceepree glass

Tetraphenylphosphonium modified layered silicate epoxy nanocomposite (EP/TPPMMT) combined with low‐melting silicate glass, Ceepree (CP) is investigated by thermal analysis, flammability tests and cone calorimeter at different heat fluxes. Adding CP and TPPMMT does not change the pyrolysis apart from increasing inorganic residue. The total heat evolved (THE) is changed insignificantly, as neither relevant additional carbonaceous charring nor flame inhibition occurs. However, flame retardancy is clearly observed due to an inorganic‐carbonaceous surface protection layer. The peak heat released rate (PHRR) is reduced by around 32–42% when 5 wt% TPPMMT is added, and 51–63% when 10 wt% CP is added. PHRR reduction less than expected is observed when both additives are combined. The reduction is greater than that achieved by using TPPMMT but less than when only CP is used. The morphology of fire residue is investigated by scanning electron microscope on different length scales and turns out to be the key to understanding the efficiency of flame retardancy. The fire residue of EP/CP shows a layered structure, whereas separated columns limit the barrier properties for EP/5%TPPMMT on the micrometer scale. Columns dominating the fire residue structure of EP/5%TPPMMT/10%CP deteriorate the fire retardancy, whereas a more integral structure at the top of the residue causes the improvement over EP/5%TPPMMT. POLYM. ENG. SCI., 2012. © 2011 Society of Plastics Engineers     

A new enzymatically produced 1-lactulose: A pilot study to test the bifidogenic effects

In a novel pilot plant scale process, lactulose was synthesized enzymatically, operating a maximum batch volume of 170 L. The test product was subjected to a randomized, double-blind, placebo-controlled pilot feeding study. Participants consumed a milk serum drink for 14 days, equalling a daily intake of about 3 g d⁻¹ galactosyl-fructoses. Additionally, the effect of industrially produced lactulose and a placebo drink without lactulose was determined. So far, clinical studies on the prebiotic action of lactulose only focussed on the effects of industrially generated lactulose. The intake of enzymatically synthesized lactulose significantly increased (p = 0.001) faecal bifidobacterial counts, while there was no difference with industrially produced lactulose. Analysis of the compounds showed that the drink with enzymatically synthesized lactulose contained an additional disaccharide, β-1,1-galactosyl-fructose. Presumably, this sugar has a bifidogenic effect and may represent a novel prebiotic.     

Spray drying with a two-fluid nozzle to produce fine particles: Atomization,scale-up,and modeling

This article presents experimental and modeling work to complete previously reported work on spray drying. Back-calculated droplet sizes have been verified by measurements with a laser imaging rig. Flow patterns in a cylindrical spray chamber have been simulated by computational fluid dynamics and demonstrated that droplet residence times are much shorter than expected. A droplet tracking population balance model has been implemented in gSOLIDS and shows how drying times vary with droplet diameter. Particle collection by cyclone and bag filter have also been compared experimentally.     

FLOW BOILING OF WATER AND n -HEPTANE IN MICRO CHANNELS

Heat transfer characteristics during flow boiling in micro channels with rectangular cross section were studied using a thermographic measuring method. The characteristic length of the channels investigated was varied in a region of 300 w m up to 700 w m. The channels were designed as Joule heating pipes. Thus, the evaporation was achieved under conditions of nearly constant heat fluxes at the heating wall of the channel. The thermographic measuring method was used to examine the wall temperature. The high spatial and temporal resolution of this thermographic measuring method makes it possible to detect the axial position of the different boiling regions. Furthermore, it allows conclusions to be made on which flow conditions occur in the different sections of the channel. Experimental results are shown with water and n -heptane as the fluid to be vaporized. The results of measurements are discussed and a correlation is given of the location where the dryout starts with the characteristic parameters. The dependence of the pressure drop in such channels on the technological parameters has also been presented.     

APPLICATIONS OF THE DRAZIN INVERSE TO THE HILL CRYPTOGRAPHIC SYSTEM. PART II.

The present Part II continues the discussion in Part I of the Drazin inverse as applied to the Hill system. A second type of Drazin inverse key-matrix (V-key) is treated in detail. The V-key is of a more complex nature than the W-key considered in Part I and allows for the use of a general involution. There are several worked out Examples and some Problems for the reader. The reader should have available Part I which includes a mod 26 multiplication table.