Concurrent phase separation and clustering in the ferrite phase during low temperature stress aging of duplex stainless steel weldments

The concurrent phase separation and clustering of alloying elements in the ferrite phase of duplex stainless steel weldments after stress aging at 325 °C have been investigated by atom probe tomography analysis. Both phase separation, into Fe-rich and Cr-rich ferrite, and solute clustering were observed. Phase separation in the heat-affected zone (HAZ) is most pronounced in the high alloyed SAF 2507, followed by SAF 2205 and SAF 2304. Moreover Cu clustering was observed in the HAZ of SAF 2507. However, decomposition in the weld bead (25.10.4L) was more pronounced than in the HAZs, with both phase separation and clustering of Ni–Mn–Si–Cu. The observed differences in the decomposition behaviors in the HAZ and weld bead can be attributed to the high Ni content and the characteristic microstructure of the weld bead with high internal strains. In addition, an applied tensile stress during aging of weldments has been found to further promote the kinetics of phase separation and clustering.     

Weldability Aspects of a Newly Developed Duplex Stainless Steel LDX 2101

Duplex grades have, due to balanced chemical compositions of both filler and base metals, a weldability that allows for successful welding using a majority of the technically relevant techniques of today. In order to fulfil the performance requirements several aspects must be considered. In the heat affected zone (HAZ) the austenite reformation must be reasonably high and in the weld metal the microstructure must be stable so that e.g. high productivity welding and multi‐pass welding are possible, without precipitation of detrimental phases in previous passes. This paper addresses the effect of alloying elements and thermal cycles on phase balance in the high temperature HAZ (HTHAZ) of the newly developed lean duplex grade LDX 2101 (EN 1.4162, UNS S32101). Bead‐on‐plate welds and simulated weld structures have been produced and investigated using metallography, scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The results are analysed using the thermodynamic database Thermo‐Calc and a model for phase transformation based on a paraequilibrium assumption for ferrite‐austenite transformation. In the temperature region outside the paraequilibrium domain, growth controlled by diffusion of substitutional elements was considered. The analysis follows a model by Cahn regarding grain boundary nucleated growth and the Hillert‐Engberg model on kinetics of spherical and planar growth.     

Phase-Field Modeling of Sigma-Phase Precipitation in 25Cr7Ni4Mo Duplex Stainless Steel

Phase-field modeling is used to simulate the formation of sigma phase in a model alloy mimicking a commercial super duplex stainless steel (SDSS) alloy, in order to study precipitation and growth of sigma phase under linear continuous cooling. The so-called Warren–Boettinger–McFadden (WBM) model is used to build the basis of the multiphase and multicomponent phase-field model. The thermodynamic inconsistency at the multiple junctions associated with the multiphase formulation of the WBM model is resolved by means of a numerical Cut-off algorithm. To make realistic simulations, all the kinetic and the thermodynamic quantities are derived from the CALPHAD databases at each numerical time step, using Thermo-Calc and TQ-Interface. The credibility of the phase-field model is verified by comparing the results from the phase-field simulations with the corresponding DICTRA simulations and also with the empirical data. 2D phase-field simulations are performed for three different cooling rates in two different initial microstructures. A simple model for the nucleation of sigma phase is also implemented in the first case. Simulation results show that the precipitation of sigma phase is characterized by the accumulation of Cr and Mo at the austenite-ferrite and the ferrite-ferrite boundaries. Moreover, it is observed that a slow cooling rate promotes the growth of sigma phase, while a higher cooling rate restricts it, eventually preserving the duplex structure in the SDSS alloy. Results from the phase-field simulations are also compared quantitatively with the experiments, performed on a commercial 2507 SDSS alloy. It is found that overall, the predicted morphological features of the transformation and the composition profiles show good conformity with the empirical data.

     

The effect of surface condition and cold work on the sulphidation resistance of 153MA at 700°C

The normal grain sized 153MA‐sample experienced an almost linear weight gain curve in the sulphidizing environment while modified materials, with a finer grain size or cold worked structure, displayed more parabolic behaviour and lower weight gains. These effects may be related to more effective Cr‐diffusion in the modified samples with a higher Cr‐grain boundary diffusion in the fine grain‐sample and a higher Cr‐bulk diffusion rate in the cold worked sample. The sand blasted sample performed exceedingly well with a thin protective oxide layer compared to the etched and ground samples which both suffered significant weight loss and spalling. The deformed surface structure on the sand blasted sample enhances the Cr‐bulk diffusion thus promoting a protective Cr‐rich oxide formation.     

Creating a population-based linked health database: a new resource for health services research

Cytologically, the distinction between bronchioalveolar carcinoma and reactive/reparative processes of respiratory epithelium can be difficult. Retrospectively, we have identified 11 consecutive cases of bronchioalveolar carcinoma from the cytology files of University Missouri-Kansas City/Truman Medical Center. On average, a combined 5.71 cytologic/histologic procedures were performed before reaching a definitive diagnosis for this group. An additional seven random cases of reactive/reparative respiratory cases of adult respiratory distress syndrome patients were used as a control. Cytomorphometric analysis was performed. The mean average nuclear diameter for the carcinoma group was 13.76 microns and for the reactive/reparative group was 13.29 microns. There was no statistical difference between the two groups (paired student t test, P > .05). It appears from our data that mean nuclear diameter is not a discriminator for the cytologic distinction between bronchioalveolar carcinoma and reactive/reparative respiratory epithelium and that the accepted cytologic parameters of for bronchioalveolar carcinoma are more valid.     

Children's event-related potentials of auditory selective attention vary with their socioeconomic status.

Past research suggests a link between socioeconomic status (SES) and brain processes in children, but direct evidence from neuroimaging is scarce. The authors investigated the relationships among SES, performance, and the neural correlates of auditory selective attention, by comparing event-related potentials (ERPs) in lower- and higher-SES preadolescent children during a task in which they attended to two types of pure tones but ignored two other types. Our hypothesis was that, at comparable performance levels, higher-SES children ignore distracters (the unattended, irrelevant tones) while lower-SES children attend equally to distracters and to targets (the attended, relevant tones). The authors found that ERP waveform differences between attended and unattended tones (Nd, difference negativity) were significant in the higher-SES but not in the lower-SES group. However, the groups did not differ in reaction times or accuracy. Electroencephalographic power analysis revealed a differential pattern of theta activity concomitant with irrelevant tones for the two groups, indicating that although they performed similarly the children from these groups recruited different neural processes. Lower-SES children, the authors suggest, deployed supplementary resources to also attend to irrelevant information. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Changes in smoking behaviors from late childhood to adolescence: Insights from the Canadian National Longitudinal Survey of Children and Youth.

Objective: To examine smoking behaviors in Canadian youth from late childhood to adolescence. By following participants from as young as 10 and 11 years, the authors proposed to identify distinct developmental pathways of smoking acquisition. Design: Growth mixture modeling was used to identify developmental trajectories of smoking among 10- to 17-year-old participants of the Canadian National Longitudinal Survey of Children and Youth. Main Outcome Measures: Developmental trajectories of trying smoking, smoking frequency, and smoking intensity. Results: Five developmental trajectories related to smoking frequency were identified, of which 2 were acquisition patterns that led to daily smoking at age 16-17, and 3 were experimentation patterns that led to nonsmoking at age 16-17. The largest variability in changes in smoking behavior over time was the reported level of smoking frequency. Conclusion: Analysis showed that there is more than 1 way in which Canadian children and adolescents acquire smoking behaviors over time. The authors were able to differentiate patterns of experimentation from patterns of acquisition. Whereas experimentation has been generally considered as 1 of the stages in the smoking acquisition process leading to regular smoking, these results indicate that experimentation can be described as a distinct process in itself. (PsycINFO Database Record (c) 2010 APA, all rights reserved)