High‐performance thermosets with tailored properties derived from methacrylated eugenol and epoxy‐based vinyl ester

A renewable chemical, eugenol, is methacrylated to produce methacrylated eugenol (ME) employing the Steglich esterification reaction without any solvent. The resulting ME is used as a low‐viscosity co‐monomer to replace styrene in a commercial epoxy‐based vinyl ester resin (VE). The volatility and viscosity of ME and styrene are compared. The effect of ME loading and temperature on the viscosity of the VE–ME resin is investigated. Moreover, the thermomechanical properties, curing extent and thermal stability of the fully cured VE–ME thermosets are systematically examined. The results indicate that ME is a monomer with low volatility and low viscosity, and therefore the incorporation of ME monomer in VE resins allows significant reduction of viscosity. Moreover, the viscosity of the VE–ME resin can be tailored by adjusting the ME loadings and processing temperature to meet commercial liquid molding technology requirements. The glass transition temperatures of VE–ME thermosets range from 139 to 199 °C. In addition, more than 95% of the monomer is incorporated and fixed in the crosslinked network structure of VE–ME thermosets. Overall, the developed ME monomer exhibits promising potential for replacing styrene as an effective low‐viscosity co‐monomer. The VE–ME resins show great advantages for use in polymer matrices for high‐performance fiber‐reinforced composites. This work is of great significance to the vinyl ester industry by providing detailed experimental support. © 2018 Society of Chemical Industry     

爱立信IMS weShare分享每一天(系列之二)如何提供出色的用户体验?

爱立信IMS weShare业务有20%的开发与用户视觉体验相关(用户界面、图标、标签以及进度条),其它的80%则主要致力于设备间的系统.与此相对比,用户的体验则完全(100%)有赖于其可接触的事物.     

Electrochemical Faceting of polycrystalline platinum in HF solutions

The electrochemical faceting of polycrystalline (pc) platinum yielding a (100)-preferred oriented electrode surface was accomplished in HF solutions by applying to the pc platinum electrode a square wave potential perturbation at 1 kHz in the 0.2 to 1.3 V range (vs rhe). SEM patterns of the resulting surfaces were also obtained. For HF concentrations up to 2 M no appreciable influence of the electrolyte concentration on the electrochemical faceting was noticed. Otherwise, the voltammetric response of the (100)-type preferred oriented platinum surface in the H-adatom potential range when compared to previously reported data resulted remarkably sensitive to the electrolyte composition. The discussion of results was based on the non-equilibrium adsorption conditions for anions under the periodic perturbation.     

A logical approach to program analysis

This paper describesMicroScope, a framework for developing analysis tools for Lisp programs. MicroScope uses a knowledge-intensive approach for program representation and analysis. The analysis tools share a common object oriented program database, and a common Prolog inference engine. The use of Prolog and a declarative representation for programs permits sharing of information, and provides high bandwidth communication between diverse analysis tools. It also supports program specification and debugging activities in the same framework. Extensions to Prolog to support analysis are described, and two tools, theCritic and theExpector, are presented.This work supported in part by Hewlett-Packard Company, the National Science foundation Under Grant Number MCS81-21750 and the Defense Advanced Research Projects Agency under contract number DAAK11-84-K-0017.     

Phase I trial of inhaled natural interleukin 2 for treatment of pulmonary malignancy: toxicity, pharmacokinetics, and biological effects

Safety, local and systemic immunomodulation, and tumor response to treatment with aerosolized natural interleukin 2 (nIL-2) applied five times a day were studied in a Phase I trial in 16 patients with pulmonary malignancies refractory to conventional therapy. The toxicity of inhaled nIL-2 was different from that observed after systemic administration. Reversible airway irritation causing a nonproductive cough represented the dose-limiting toxicity. Mild to moderate reduction of the vital capacity and forced expiratory volume (FEV1) with minor effects on relative FEV1, peak expiratory flow, airway resistance, and PaO2 was experienced by individual patients. In 14 patients suffering from pulmonary metastases due to renal cell cancer, one durable complete response, one partial response, and one mixed response were observed. Inhalation of nIL-2 aerosol resulted in a dose-dependent expansion of pulmonary immunocompetent cells in bronchoalveolar lavage fluid. Posttreatment bronchoalveolar lavage showed an activated lymphocyte phenotype with increased HLA-DR expression. The only systemic biological effect detectable in peripheral blood was a marked increase of soluble interleukin 2 receptor serum levels. We conclude that treatment with aerosolized nIL-2 is an effective means for site-specific immunomodulation and deserves further investigation for the treatment of malignant and inflammatory lung disease.     

Hepatic and splenic sarcoidosis: ultrasound and MR imaging

Two polypeptide antigens with molecular sizes of 34,000 daltons (34 kDa) and 38 kDa were separated from heated cells of a human clinical treponeme strain G7201 and Treponema denticola ATCC 35404, respectively. The rabbit polyclonal antisera against these antigens were produced and examined for their immunological reactions with the two heated antigens or intact spirochetal cells. Immunoblot analysis showed that the 34-kDa protein was also detected in T. denticola ATCC 35404 and ATCC 33520, and the 38-kDa protein was detected only in the two ATCC strains. Immunoelectron microscopy using the two rabbit antisera and protein A-gold complexes demonstrated that the 38-kDa protein antigen was present on the axial flagella of two T. denticola strains, and that the 34-kDa protein was located in the axial flagella of the G7201 cell, but neither in axial flagella nor on outer envelopes of the two ATCC strains cells, suggesting that the native 34-kDa axial flagellar protein of the G7201 strain may be different from that of T. denticola in terms of immunological reactivity.     

Requirements for nuclear energy in the 21st century nuclear energy as a sustainable energy source

Nuclear energy must compete against other energy technologies in the 21st century. It must be economical and it must be proven that it fulfills the conditions for sutainability. This means that the requirements of — no short term depletion of resources — extremely low emission of noxious or radioactive substances to the environment — extremely low release of radioactivity from a nuclear plant in case of the most severe accidents and — the present very long term problem of high active waste must be transformed into a few hundred years problem through destruction of plutonium, transmutation of the minor actinides and the most important very long lived fission products.     

The partial testing design: a less costly way to test equivalence for sensitivity and specificity

We propose a new, less costly, design to test the equivalence of digital versus analogue mammography in terms of sensitivity and specificity. Because breast cancer is a rare event among asymptomatic women, the sample size for testing equivalence of sensitivity is larger than that for testing equivalence of specificity. Hence calculations of sample size are based on sensitivity. With the proposed design it is possible to achieve the same power as a completely paired design by increasing the number of less costly analogue mammograms and not giving the more expensive digital mammograms to some randomly selected subjects who are negative on the analogue mammogram. The key idea is that subjects who are negative on the analogue mammogram are unlikely to have cancer and hence contribute less information for estimating sensitivity than subjects who are positive on the analogue mammogram. To ascertain disease state among subjects not biopsied, we propose another analogue mammogram at a later time determined by a natural history model. The design differs from a double sampling design because it compares two imperfect tests instead of combining information from a perfect and imperfect test.