Effect of the Porous Skeletal Iron Structure on the Infiltration of Aluminum Melts

Powder Metallurgy and Metal Ceramics - The infiltration of aluminum melts into porous metal skeletons produced by powder metallurgy methods, including 3D printing, under a pressure gradient was...     

Optimization of the Sintering Parameters for Materials Manufactured by Powder Injection Molding

Powder Metallurgy and Metal Ceramics - The properties of sintered and heat-treated steels produced from the Catamold 8740 material by powder injection molding were examined. Parts made of the...     

Residual phase noise measurements of VHF, UHF, and microwavecomponents

The results of residual phase noise measurements on a number of VHF, UHF, and microwave amplifiers, both silicon (Si) bipolar junction transistor (BJT) and gallium arsenide (GaAs) field effect transistor (FET) based, electronic phase shifters, frequency dividers and multipliers, etc., which are commonly used in a wide variety of frequency source and synthesizer applications are presented. The measurement technique has also been used to evaluate feedback oscillator components, such as the loop and buffer amplifiers, which can play important roles in determining an oscillator's output phase noise spectrum (often in very subtle ways). While some information has previously been published related to component residual phase noise properties, it generally focused on the flicker noise levels of the devices under test, for carrier offset frequencies less than 10 kHz. The work reported herein makes use of an extremely low noise, 500 MHz surface acoustic wave resonator oscillator (SAWRO) test source for residual phase noise measurements, both close-to-and far-from-the-carrier. Using this SAWRO-based test source at 500 MHz, we have been able to achieve a measurement system phase noise floor of -184 dBc/Hz, or better, for carrier offset frequencies greater than 10 kHz, and a system flicker phase noise floor of -150 dBc/Hz, or better, at 1 Hz carrier offset. The paper discusses the results of detailed residual phase noise measurements performed on a number of components using this overall system configuration. Several interesting observations related to the residual phase noise properties of moderate to high power RF amplifiers, i.e., amplifiers with 1 dB gain compression points in the range of +20 to +33 dBm, are highlighted     

The Structure and Properties of the Molybdenum-Doped WC–W2C Eutectic Alloy Depending on the Production Method

Powder Metallurgy and Metal Ceramics - Scanning and transmission electron microscopy and X-ray diffraction have revealed that the eutectic 5 wt.% Mo-doped WC–W2C alloy changes its cooling...     

Some results of mathematical simulation of the process of peat ignition

A formulation and numerical solution of the problem about peat layer ignition as a result of the action of a creeping fire bed are proposed based on a mathematical model of a porous reactive medium. Ignition of the initial reagent is shown to be determined by processes of drying, peat pyrolysis, oxidation of carbon oxide, and moisture content. The results of the numerical solution are compared with experimental data, and an estimate of the mass content of combustion products contaminating the atmosphere is presented.