Influence of cold-rolling and annealing conditions on formability of aluminium alloy sheet

Using an Al-Mg-Cu alloy developed for auto body panels, strip sheets are experimentally produced by various cold-rolling and annealing procedures. Tensile and metallographic properties of the sheets and their relations are examined to attain high formability. The elongation is closely related to the grain size, and increases with the final annealing temperature. The rolling texture influences the plastic anisotropy, the Lankford value of the sheets. The comparatively high Lankford values are obtained under the condition that both the intermediate and the final annealing temperatures are higher and the reduction ratio after the intermediate annealing is smaller.     

Thermal Expansion Behavior of the Si3N4-Whisker-Reinforced Soda-Borosilicate Glass Matrix Composite

Thermal expansion behaviors of a Si₃N₄-whisker-reinforced sodaborosilicate glass matrix composite are studied. An abrupt increase of the coefficient of thermal expansion is observed and is attributed to formation of crystobalite in the sodaborosilicate glass matrix. This thermal expansion behavior is discussed with special reference to the phase transformation of the crystobalite.     

Thermodynamics of calcium and oxygen in molten titanium and titanium-aluminum alloy

The deoxidation equilibrium of molten titanium and titanium-aluminum alloys saturated with solid CaO has been measured in the temperature range from 1823 to 2023 K. The equilibrium constant of reaction CaO (s)=Ca (mass pct in Ti,Ti-Al)+O (mass pct in Ti,Ti-Al) and the interaction parameter between calcium and oxygen were determined for Ti, TiAl, and TiAl₃. The standard Gibbs energy of reaction for TiAl was obtained as follows: $$\Delta G^\circ = 279,000 - 103TJ/mol$$ The possibilities for the deoxidation of titanium and titanium-aluminum alloys by using calcium-based fluxes are discussed.     

Enhanced Infrared Absorption of C60 on Thin Evaporated Pd Island Films

Infrared transmission spectra of C₆₀ multilayers on thin Pd films deposited onto surface-oxidized Si(100) and hydrogen-terminated Si(111) substrates are reported. In both cases, the spectra in the 1500–1100 cm⁻¹ region exhibited bands at 1444, 1429, and 1182 cm⁻¹ due, respectively, to the A_g (2), T_1u (4), and T_1u (3) modes. The appearance of the A_g (2) mode, which is originally infrared inactive (Raman active), reveals electron transfer from the metal to chemisorbed C₆₀. Indeed, increasing the thickness of C₆₀, the A_g (2) mode intensity saturated more rapidly than the T_1u (4) and T_1u (3) modes. The originally infrared active T_1u (4) and T_1u (3) modes were enhanced in intensity depending upon the Pd thickness. Actually, while both substrates gave nearly the same magnitude of enhancement, the optimum Pd thickness was smaller on the hydrogen-terminated surface than on the surface-oxidized surface. On the other hand, the A_g (2) mode was less intense on the hydrogen-terminated surface than on the oxidized surface, suggestive of a shortage of chemisorbed C₆₀ and thus pointing out the importance of the metal film morphology. Indeed, Pd films deposited on the two substrates gave rise to quite different AFM images. We also show that, regardless of the substrate, the A_g (2) mode is an order of magnitude smaller than for Ag deposition, though no remarkable intensity differences were observed with respect to the T_1u (4) and T_1u (3) modes.     

Induction of ectopic corticotropic tumor in mouse embryos by exo utero cell transplantation and its effects on the fetal adrenal gland

To establish an in vivo experimental system for developmental endocrinology research, AtT-20 cells, a corticotropic tumor cell line, were transplanted by exo utero manipulation into mouse embryos on embryonic day 14. The induced tumor secreted ACTH in situ, and the circulating ACTH level was elevated. This was the first model for studying the regulation of ACTH in the mouse fetal adrenal in vivo and the first continuous ACTH treatment model in rodent fetuses. The changes in the adrenal gland from the tumor-induced embryos were analyzed by light microscopic morphometry, immunohistochemistry for steroidogenic enzymes, and electron microscopy. In the treated adrenal, the volume of the inner cortical zone was significantly larger than that in controls. In the inner zone, cell density was decreased, and average cell size was increased, whereas bromodeoxyuridine-incorporation was not increased. The enlarged inner zone cells expressed an enhanced level of cytochrome P45011beta, the corticosterone-synthesizing enzyme, and the serum corticosterone level was increased. Electron microscopy showed an active form of the organelles involved in steroidogenesis. These findings indicate that ACTH stimulates both adrenocortical hypertrophy and steroidogenesis in fetal mice. Potential perspectives of the novel paradigm in this research for molecular developmental endocrine study are discussed.     

Infrared absorption enhancement of C60 by overlaying thin silver island films

Normal-incidence infrared absorption has been observed for silver overlaid C(60) thin films formed on surface-oxidized Si(111) substrates as a function of the silver or C(60) film thickness. The absorption spectra exhibit bands at 1429 and 1180 cm(-1) due, respectively, to the infrared active T(lu) (4) and T(lu) (3) modes of C(60) in multi-layers. Additionally, two bands appear at 1442 and 1370 cm(-1). The former band is caused by activation of the infrared inactive (Raman active) A(g) (2) mode via electron transfer from the silver to adsorbed C(60), and the latter is assigned to the T(1u) (4) mode red-shifted by the charge transfer. These bands are all enhanced in intensity dependent either upon the silver or C(60) thickness, i.e., the largest absorption enhancement is obtained for 25-monolayers-thick silver and 12-nm-thick C(60). Under atomic force microprobe inspection, the average size and height of the islands in the overlaid 25-monolayers-thick silver change with underlying C(60) film thickness. The influence of the C(60) film structure upon the silver film and in turn the absorption intensity is strongly suggested.     

Optical Burst Switching Router With 40-,10-Gb/s Bit-Rate Transparent Contention Resolution

We report a bit-rate transparent optical burst switching (OBS) router prototype using a fast 5 times 5 PLZT [(Pb,La)(Zr,Ti)O₃ ] optical matrix switch. Dynamic switching in a two-wavelength, 2 times 2 OBS switch is demonstrated. Contention resolution using a tunable Mach-Zehnder interferometer wavelength converter for both 40- and 10-Gb/s bursts is demonstrated for the first time. Error-free operation was achieved for both bit rates under the same settings, as required in autonomous networks     

Polarization-Insensitive Monolithic 40-Gbps SOA–MZI Wavelength Converter With Narrow Active Waveguides

A polarization-insensitive monolithic 40-Gbps semiconductor optical amplifier (SOA)-Mach-Zehnder interferometer wavelength converter has been developed. Based on the photon-electron rate equation, we optimized the dimensions of the waveguide structure to maximize the field confinement in the active layer. An InGaAsP active layer with narrow SOA waveguide effectively enables polarization-insensitive high-speed wavelength conversion. High-precision wafer processing technique enabled the fabrication of submicrometer-wide active waveguides with low current leakage. Input waveguide arrays were fabricated at intervals of 25 mum and mounted in a module with two-lens aspherical lens optics. The 40-Gbps nonreturn-to-zero wavelength conversion experiment demonstrates a clear eye opening over full C-band operation     

A simple approach to plane strain extrusion with dead metal zone using upper-bound theorem

This paper treats the upper-bound approach to the problem of rigid-plastic deformation in case where the configuration of the deformation zone is previously unknown. The plane strain forward extrusion process with the so-called dead metal zone is analysed by assuming a simple velocity field. The calculations are carried out for the material with or without strain hardening or strain rate sensitivity and for various reduction ratios. The numerical results show that the region of the dead metal zone becomes smaller with the increase in the reduction ratio. The calculated punch forces agree with the experimental ones fairly well. Furthermore, it is found that the dead metal zone becomes larger with increasing the strain hardening as well as the strain rate sensitivity of the material.     

TEM,XPS and SIMS Analyzes on Grain Boundary of Lanthanum Chromites

The morphological characteristics, chromium valence state, and cation transport in the vicinity of grain boundary in La_1-xCa_xCrO₃ were investigated by using TEM/EDS, XPS and SIMS techniques. The width of grain boundary was around 1 nm where anomalous enrichment of calcium was observed. Higher valence state of chromium such as Cr⁶⁺(d⁰) was detected in the grain boundaries whereas Cr³⁺(d³) and Cr⁴⁺(d²) were dominant in the bulk. Very fast interdiffusion of alkaline earths was observed in the Sr²⁺-La_0.75Ca_0.25CrO₃ system. All observed phenomena were correlated by assuming the A-site vacancy which may be induced by the formation of Cr⁶⁺ at grain boundaries.