Ground bounce in digital VLSI circuits

This paper is concerned with the analysis and optimization of the ground bounce in digital CMOS circuits. First, an analytical method for calculating the ground bounce is presented. The proposed method relies on accurate models of the short-channel MOS device and the chip-package interface parasitics. Next the effect of ground bounce on the propagation delay and the optimum tapering factor of a multistage buffer is discussed and a mathematical relationship for total propagation delay in the presence of the ground bounce is obtained. Effect of an on-chip decoupling capacitor on the ground bounce waveform and circuit speed is analyzed next and a closed form expression for the peak value of the differential-mode component of the ground bounce in terms of the on-chip decoupling capacitor is provided. Finally, a design methodology for controlling the switching times of the output drivers to minimize the ground bounce is presented.     

Study of the morphology and mechanical properties of polypropylene composites with silica or rice‐husk

The mechanical, morphological behavior and water absorption characteristics of polypropylene (PP) and silica, or PP and rice‐husk, composites have been studied. The silica used in this study as filler was a commercial type produced from soluble glass or rice husks. The compatibilizing effect of PP grafted with monomethyl itaconate (PP‐g‐MMI) and/or with vinyltriethoxysilane (PP‐g‐VTES) as polar monomers on the mechanical properties and water absorption was also investigated. In general, a high loading of the studied fillers in the polymer matrix increases the stiffness and the water absorption capacity. This effect is more noticeable in the tensile modulus of the PP/silica composite with PP‐g‐VTES as compatibilizer. However, the increase of the rice‐husk charge as a natural filler in the PP matrix decreases the stiffness, and in the presence of PP‐g‐MMI as compatibilizer in PP/rice‐husk, the tensile modulus and water absorption of the composite were improved. The better adhesion and phase continuity in the PP/silica and PP/rice‐husk composites with different compatibilizers was confirmed by the morphological study. Copyright © 2004 Society of Chemical Industry     

Architectures for Silicon Nanoelectronics and Beyond

Although nanoelectronics won't replace CMOS for some time, research is needed now to develop the architectures, methods, and tools to maximally leverage nanoscale devices and terascale capacity. Addressing the complementary architectural and system issues involved requires greater collaboration at all levels. The effective use of nanotechnology calls for total system solutions     

Segregation Neutralised Steels: Microstructural Banding Elimination from Dual-Phase Steel Through Alloy Design Accounting for Inherent Segregation

Metallurgical and Materials Transactions A - Banding in commercial dual-phase steels, such as banded ferrite and pearlite or ferrite and martensite microstructures, is inherited from segregation...     

Influence of grafted polypropylene on the mechanical properties of mineral‐filled polypropylene composites

The purpose of this work was to study how mineral fillers would behave in a polypropylene (PP) matrix when PP modified with maleic anhydride (MA) and/or itaconic acid (IA) was used as a coupling agent in the preparation of mineral‐filled PP composites. The composites were characterized with tensile mechanical measurements and morphological analysis. The optimum amount of the coupling agent to be used to obtain composites with improved mechanical properties was established. The results indicated that these coupling agents enhanced the tensile strength of the composites significantly, and the extent of the coupling effect depended on the nature of the interface that formed. The incorporation of coupling agents enhanced the resistance to deformation of the composite. The behavior of IA‐modified PP as a coupling agent was similar to that of a commercial MA‐modified PP for the filled PP composites. Evidence of improved interfacial bonding was revealed by scanning electron microscopy studies, which examined the surfaces of fractured tensile test specimens; their microstructures confirmed the mechanical results with respect to the observed homogeneous or optimized dispersion of the mineral‐filler phase in these composites. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 2343–2350, 2007     

Quantum teleportation through noisy channels with multi-qubit GHZ states

We investigate two-party quantum teleportation through noisy channels for multi-qubit Greenberger–Horne–Zeilinger (GHZ) states and find which state loses less quantum information in the process. The dynamics of states is described by the master equation with the noisy channels that lead to the quantum channels to be mixed states. We analytically solve the Lindblad equation for \(n\) -qubit GHZ states \(n\in \{4,5,6\}\) where Lindblad operators correspond to the Pauli matrices and describe the decoherence of states. Using the average fidelity, we show that 3GHZ state is more robust than \(n\) GHZ state under most noisy channels. However, \(n\) GHZ state preserves same quantum information with respect to Einstein–Podolsky–Rosen and 3GHZ states where the noise is in \(x\) direction in which the fidelity remains unchanged. We explicitly show that Jung et al.’s conjecture (Phys Rev A 78:012312, 2008), namely “average fidelity with same-axis noisy channels is in general larger than average fidelity with different-axes noisy channels,” is not valid for 3GHZ and 4GHZ states.     

Cracks coalescence mechanism and cracks propagation paths in rock-like specimens containing pre-existing random cracks under compression

The mechanism of cracks propagation and cracks coalescence due to compressive loading of the brittle substances containing pre-existing cracks （flaws） was modeled experimentally using specially made rock-like specimens from Portland Pozzolana Cement （PPC）. The breakage process of the specimens was studied by inserting single and double flaws with different inclination angles at the center and applying uniaxial compressive stress at both ends of the specimen. The first crack was oriented at 50＆#176; from the horizontal direction and kept constant throughout the analysis while the orientation of the second crack was changed. It is experimentally observed that the wing cracks are produced at the first stage of loading and start their propagation toward the direction of uniaxial compressive loading. The secondary cracks may also be produced in form of quasi-coplanar and/or oblique cracks in a stable manner. The secondary cracks may eventually continue their propagation in the direction of maximum principle stress. These experimental works were also simulated numerically by a modified higher order displacement discontinuity method and the cracks propagation and cracks coalescence were studied based on Mode I and Mode II stress intensity factors （SIFs）. It is concluded that the wing cracks initiation stresses for the specimens change from 11.3 to 14.1 MPain the case of numerical simulations and from 7.3 to 13.8 MPa in the case of experimental works. It is observed that cracks coalescence stresses change from 21.8 to 25.3 MPa and from 19.5 to 21.8 MPa in the numerical and experimental analyses, respectively. Comparing some of the numerical and experimental results with those recently cited in the literature validates the results obtained by the proposed study. Finally, a numerical simulation was accomplished to study the effect of confining pressure on the crack propagation process, showing that the SIFs increase and the crack initiation angles change in this case.     

Multiple model bank selection based on nonlinearity measure and H-gap metric

This paper provides a systematic method for model bank selection in multi-linear model analysis for nonlinear systems by presenting a new algorithm which incorporates a nonlinearity measure and a modified gap based metric. This algorithm is developed for off-line use, but can be implemented for on-line usage. Initially, the nonlinearity measure analysis based on the higher order statistic (HOS) and the linear cross correlation methods are used for decomposing the total operating space into several regions with linear models. The resulting linear models are then used to construct the primary model bank. In order to avoid unnecessary linear local models in the primary model bank, a gap based metric is introduced and applied in order to merge similar linear local models. In order to illustrate the usefulness of the proposed algorithm, two simulation examples are presented: a pH neutralization plant and a continuous stirred tank reactor (CSTR).     

Factored Edge-Valued Binary Decision Diagrams

Factored Edge-Valued Binary Decision Diagrams form an extension to Edge-Valued Binary Decision Diagrams. By associating both an additive and a multiplicative weight with the edges, FEVBDDs can be used to represent a wider range of functions concisely. As a result, the computational complexity for certain operations can be significantly reduced compared to EVBDDs. Additionally, the introduction of multiplicative edge weights allows us to directly represent the so-called complement edges which are used in OBDDs, thus providing a one to one mapping of all OBDDs to FEVBDDs. Applications such as integer linear programming and logic verification that have been proposed for EVBDDs also benefit from the extension. We also present a complete matrix package based on FEVBDDs and apply the package to the problem of solving the Chapman-Kolmogorov equations.     

Preparation of polypropylene‐based nanocomposites using nanosized MCM‐41 as support and in situ polymerization

MCM‐41 nanoparticles were used for preparing nanocomposites through the in situ polymerization of propylene. The performance of the catalytic system and the final properties of the materials obtained are highly dependent on the methodology used for impregnation of the catalyst onto the support particles, and therefore an optimization study for the impregnation methodology of the catalyst (Me₂Si(Ind)₂ZrCl₂) was carried out. Two different methodologies were used; the results in terms of catalytic activity and polymer molecular masses indicated that the most promising one involved the pre‐activation of the catalyst with the cocatalyst, methylaluminoxane, followed by impregnation onto the MCM‐41 nanoparticles. Thus, an optimized route for the preparation of polypropylene nanocomposites achieving significant improvements in catalyst activity was developed. The nanocomposite materials were characterized by GPC, TGA and DSC. The dispersion state and the size of the nanoparticles incorporated in the polypropylene matrix were investigated by transmission electron microcopy. Additionally, this methodology allows simultaneous control of the desired amount of support and the concentration of catalyst to be used in the in situ polymerization. © 2015 Society of Chemical Industry