A Novel Self-Organizing Approach to Automatic Traffic Light Management System for Road Traffic Network

Wireless Personal Communications - Traffic network is basically a “network of networks” consisting of mainly two types of networks: road network and a travel network. Due to drastic...     

A Dynamic Inertial Weight Strategy in Micro PSO for Swarm Robots

Wireless Personal Communications - A relatively new area of research and development is Swarm Robotics. It is a part of the swarm intelligence field. In the proposed paper, we shall use swarm...     

Fabrication and optimization of polypyrrole/cerium oxide/glassy carbon sensing platform for the electrochemical detection of flupirtine

Journal of Applied Electrochemistry - In spite of single nanomaterials, nanocomposites have come to be the superior modifying materials for electrochemical sensing. Herein, the highly...     

Engineering New Microvascular Networks On-Chip: Ingredients,Assembly, and Best Practices

Tissue engineered grafts show great potential as regenerative implants for diseased or injured tissues within the human body. However, these grafts suffer from poor nutrient perfusion and waste transport, thus decreasing their viability post-transplantation. Graft vascularization is therefore a major area of focus within tissue engineering because biologically relevant conduits for nutrient and oxygen perfusion can improve viability post-implantation. Many researchers used microphysiological systems as testing platforms for potential grafts owing to an ability to integrate vascular networks as well as biological characteristics such as fluid perfusion, 3D architecture, compartmentalization of tissue-specific materials, and biophysical and biochemical cues. Although many methods of vascularizing these systems exist, microvascular self-assembly has great potential for bench-to-clinic translation as it relies on naturally occurring physiological events. In this review, the past decade of literature is highlighted, and the most important and tunable components yielding a self-assembled vascular network on chip are critically discussed: endothelial cell source, tissue-specific supporting cells, biomaterial scaffolds, biochemical cues, and biophysical forces. This paper discusses the bioengineered systems of angiogenesis, vasculogenesis, and lymphangiogenesis and includes a brief overview of multicellular systems. It concludes with future avenues of research to guide the next generation of vascularized microfluidic models.     

46,XX/69,XXX diploid-triploid mixoploidy with hypothyroidism and precocious puberty

We report a 20 month old female patient with diploid-triploid mixoploidy (46,XX/69,XXX) syndrome with hypothyroidism and precocious puberty. The triploid cell line was only expressed in the fibroblast culture and comprised the majority (95%) of the cells. Chromosome analysis of the fetal blood sample and peripheral blood sample were normal. The patient shows typical features of full triploidy (growth and severe mental retardation, cranial and facial dysmorphism, complete syndactyly of fingers 3/4, partial syndactyly of toes 2/3) and facial but no body asymmetry. At the age of 5 months central hypothyroidism and precocious puberty were diagnosed. Thin pigmented streaks were visible on the wrists and legs of the patient at the age of 16 months. This is the first patient reported so far with 46,XX/69,XXX mixoploidy suffering from hypothyroidism and precocious puberty.     

Dynamic simulations of the molecular conformations of wild type and mutant xanthan polymers suggest that conformational differences may contribute to observed differences in viscosity

Xanthan gum is an exopolysaccharide secreted by the bacterium Xanthamonas campestris whose ability to make solutions viscous at low concentrations and over a pH and temperature range have generated much interest in both academic and industrial environments. Mutant Xanthamonas strains have been derived that produce xanthan gums with an altered or variant subunit chemical structure and different measured viscosities when compared with the wild type (wt) form of the polymer. Two variant gums were targeted as potentially interesting in this study, these being the nonacetylated tetramer (natet) and the acetylated tetramer (atet), which both lack a side-chain terminal mannose residue and in one case (natet) lacks an acetate group on an internal mannose residue. Solutions of these tetrameric gums possess viscosities higher (natet) and lower (atet) than the wt gum, and therefore we have attempted to determine whether these molecules possess unique conformational preferences when compared with the wt and with each other. In this manner we can initiate an understanding of how a polysaccharide's conformation contributes to its solution properties. The GEGOP software permits a sampling of the static and dynamic equilibrium states of carbohydrate molecules, and this software was employed to calculate equilibrium states of representative oligosaccharides with chemical structures representative of xanthan-like molecules. Energy minimization techniques revealed similar local minima for all three molecules. Some of these minima are comprised of elongate backbone conformations (A type) in which side chains fold onto backbone surfaces. Other minima with A backbones possessed side chains in less intimate backbone contact especially when calculations were performed with a low dielectric constant. This phenomenon was particularly pronounced in the wt molecule where an increased number of negatively charged side-chain residues experience charge repulsion resulting in reduced side-chain-backbone contact. Metropolis Monte Carlo (MMC) dynamic simulations performed with an elevated temperature factor (1000 K) allowed a better qualitative representation of conformational space than 300 K simulations. Employing a nonhierarchical cluster analysis method (population density profile: PDP) coupled with a classification scheme, it was possible to partition resulting MMC data sets into conformational families. This analysis revealed that in simulations performed with different dielectric constant values (10, 25, and infinity) all molecules possessed primarily A-type backbones. Less elongate, more open helical backbone forms (B, C, D, J, and Flat-a) did occur during the simulations but were populated to a lesser extent. In the natet molecule significantly open helical backbones existed (E, F, G, H, and I) that did not occur in the lower viscosity wt and atet molecules. PDP clustering methods and subsequent conformational classification applied to the first residue (mannose) of the side chain permitted a determination of side-chain orientation. Comparison of all three molecules indicated a larger population of side-chain conformational families in less direct backbone contact for the wt molecule than either of the variant molecules (natet/atet) suggesting that the side chains in the wt are more flexible. Thus, a major conformational difference between the high viscosity natet and the lower viscosities of the wt/atet is the increased amount of open helical backbone in the natet. In addition, the significant difference between the higher viscosity wt and the lower viscosity atet is the increase side-chain flexibility in the wt. We hypothesize that conformational differences of this kind could form a partial explanation of the observed differences in viscosity between these xanthan-like polymers.     

Conversion of acrylonitrile-based precursors to carbon fibres

The progress of stabilization of two compositions of acrylic fibres with various orientations has been followed by a variety of techniques. The thermooxidative treatments for stabilization have been carried out in a continuous process and also in a batch process under free shrinkage, constant length and constant tension conditions. The morphological model of acrylic fibres consists of an alternating sequence of laterally ordered and laterally disordered regions along the fibre direction. This structure is consistent with the observations based on small-angle X-ray scattering of copper- impregnated precursor fibres and thermomechanical response, thermal stress development, calorimetry, wide- and small-angle X-ray scattering and sonic modu-lus measured at different extents of stabilization. Lateral as well as orientational order in these fibres can be increased markedly through a high-temperature deformation process prior to stabilization. An increase in perfection and extent of order is observed in the early stages of stabilization. There is also a simultaneous decrease in the orientation of the disordered phase at this stage and the extent of this decrease depends on the axial constraints imposed on the fibre. Little difference in the rate of stabilization is observed as measured by density or oxygen uptake for fibres with different extents of orientation, lateral order or restraint. Fibres containing itaconic add, a stabilization catalyst did show an increased rate of stabilization. Inferences have been drawn regarding additional research pertaining to achieving high order in precursor fibres, minimizing orientational relaxation during oxidative stabilization, and the techniques for monitoring the extents of the stabilization treatment and the changes in relevant morphological parameters.