INSTRUMENTATION FOR FLOW PROPERTIES OF GAS-SOLID SUSPENSIONS AND RECENT ADVANCES

Measurements of local velocity, density, and mass flow of phases of a gas-solid suspension are needed in determining transport properties, validating theoretical predictions, and formulating design procedures. Most of the available instruments are based on time averages or fluctuations with time. Primary standard for direct measurement of density of a phase such as solid particles is being developed. A laser phase Doppler device, within certain restrictions, may give local instantaneous density, while other optical methods and neutron beam remain secondary standards based on mass flow calibrations. An overall review including recent results has been made on both intrusive and non-intrusive instruments; their limitations and future possibilities are outlined and discussed. The limitations of the traditional approach utilizing the triangular relation between local averages of mass flow, velocity, and density of particles for the determination of flow properties, and higher order correlations are demonstrated.     

Optical constants of in situ-deposited films of important extreme-ultraviolet multilayer mirror materials

We have performed angle-dependent reflectance measurements of in situ magnetron sputtered films of B(4)C, C, Mo, Si, and W. The Fresnel relations were used to determine the complex index of refraction from the reflectance data in the region of approximately 35-150 eV. In the cases of Si, C, and B(4)C we found excellent agreement with published data. However, for Mo and W we found that the optical properties from 35 to 60 eV differed significantly from those in the literature.     

How Internet software companies negotiate quality

In Internet speed development, innovation and time-to-market work against software quality. Browser giants like Microsoft Internet Explorer and Netscape Navigator are openly dealing with quality issues. The practices of application and smaller niche firms are less clear, but there are important trends     

Reduction of folic acid during baking and implications for mandatory fortification of bread

A pilot scale study designed to quantify the reduction of folic acid during bread baking in Ireland was undertaken. Flour was fortified with different concentrations of folic acid and used to make four different types of commercial bread. The dispersal of folic acid in flour on a pilot scale was variable but better homogeneity would have been achieved in the final bread due to batch size and thorough mixing of the dough. Generally, the heat degradation of folic acid during baking was between 21.9% and 32.1%. Whilst the percentage degradation of folic acid in white pan loaves, white baguettes and brown soda bread were similar the result in wholemeal bread was found to be significantly higher than in other bread types tested. Taking into account all variables affecting folic acid concentration during baking, a concentration of c. 225 μg 100 g^?1 folic acid would be needed in flour to deliver commercial bread in Ireland with an average folic acid content of 120 μg 100 g^?1 in line with Government requirements.     

Development of a shortened center for epidemiological studies depression scale for assessment of depression in rheumatoid arthritis.

Objective: The purpose was to develop a short-form version of the Center for Epidemiologic Studies Depression Scale (CES-D) for the identification of persons with major depressive disorder (MDD) within a population with rheumatoid arthritis (RA). Study Design: Data were analyzed from 337 persons with RA. Forty-six participants met the diagnostic criteria for MDD; 291 participants were classified in the non-MDD category (including 21 participants with dysthymia and 18 participants with minor depressive disorder). A short-form version of the CES-D was developed, and multiple cutoff scores were examined. Results: A cutoff score of ≥5 from a 9-item, short-form CES-D was found to be generally as efficient as the more commonly used full-scale cutoff score of ≥16 for classifying participants with MDD within an RA population. Although the shortened CES-D scale (cutoff score ≥5) was slightly more sensitive, it also exhibited slightly less specificity than the full-scale cutoff score of ≥16. Conclusion: The results suggest that a short-form CES-D can be used to screen for MDD within an RA sample with a degree of efficiency that is generally comparable to that of the full-scale instrument. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Specific exemplar retention and prototype abstraction in young and old adults.

Examined the effects of age differences in retention of information about specific concept members on 40 older adults' (mean age 72.3 yrs) and 40 younger adults' (mean age 20.6 yrs) ability to abstract central tendency information. The mean Wechsler Adult Intelligence Scale—Revised (WAIS—R) Vocabulary scaled score for the young adults was significantly lower than that of the older adults. Ss were presented with a series of visual patterns that were organized around a prototype and were then presented with these same patterns plus a set of new patterns varying in prototype similarity in a recognition test. It was found that young Ss retained more information about specific acquisition set exemplars, which resulted in slightly different recognition responses for new patterns. However, the recognition behavior of both young and older Ss appeared to be governed by the same rules. It is suggested that the organization of conceptual information does not change with age but that the poorer retention of specific item information in older adults may result in a less complete representation. (14 ref) (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Hybrid magnetic tunnel junction/vertical cavity surface emittinglaser field sensor device

A hybrid magneto-optoelectronic device is demonstrated, composed of a magnetic tunnel junction and a vertical cavity surface emitting diode laser. External magnetic field changes are translated into amplitude modulation of the laser output power with sensitivity that suggests applications in wireless and remote sensing of magnetic fields     

Fundamentals of MRAM Technology

Developments in portable communication and computing systems are creating a growing demand for nonvolatile random access memory that is dense and fast. None of the existing solid-state memories can provide all the needed attributes in a single memory solution. Therefore, to achieve the required multiple functionality requirements, a number of different memories are being used while compromising performance and adding cost to the system. Magnetoresistive Random Access Memory (MRAM) has the potential to replace these memories in various systems with a single, universal memory solution. Key attributes of MRAM technology are nonvolatility and unlimited read and write endurance. In addition, MRAM can operate at high-speed and is expected to have competitive densities. In this paper we describe several fundamental technical and scientific aspects of MRAM with emphasis on recent accomplishments that enabled our successful demonstration of a 256 kbit memory chip.     

Electrically enhanced extraction of penicillin G into dichloromethane

The application of electrically enhanced liquid-liquid extraction techniques to the recovery and purification of penicillin G from aqueous solutions and from untreated mycelial culture broth is described. Experiments at laboratory scale have shown that extraction rates into dichloromethane at pH 4.0 may be increased by factors of up to five-fold by electrostatically spraying penicillin G solutions into a continuum of solvent held in electrical tension. The experimental studies revealed that in small spray column contactors, electrostatic spray conditions, once initiated at nozzle voltages in excess of 10 kV, could be sustained at nozzle voltages as little as 4 kV. The results demonstrate the potential of this technique as an alternative to mechanically augmented liquid-liquid contact for the intensification of whole broth extraction processes.