Tetrahydroindoles as Multipurpose Screening Compounds and Novel Sirtuin Inhibitors

Indoles are privileged structures in medicinal and bioorganic chemistry that are particularly well suited to serve as platforms for diversity. Among many other therapeutic areas, the indole scaffold has been used to design aromatic compounds useful to interfere with enzymes engaged in the regulation of substrate acylation status, such as sirtuins. However, the planarity of the indole ring is not necessarily optimal for all target enzymes, especially when functionalization with aromatic side chains is required. Replacement of flat scaffolds by nonplanar molecular cores dominated by sp³ hybridization is a common strategy to avoid the disadvantages associated with poor solubility and high promiscuity, while covering less-well-explored areas of chemical space. Thus, we synthesized fragment-like tetrahydroindoles suitable for fragment-based drug discovery as well as a well-characterized small library intended as multipurpose screening compounds. For proof of principle, these compounds were screened against sirtuins 1–3, enzymes known to be addressable by indoles. We found that 2,6,6-trimethyl-4-oxo-4,5,6,7-tetrahydro-1H-indole-3-carboxamides are potent and selective SIRT2 inhibitors. Compound 16 t displayed an IC₅₀ value of 0.98 μm and could serve as exquisite starting point for hit-to-lead profiling.     

Experimental and numerical analysis of the influence of cable tray arrangements on the resulting mass loss rate and fire spreading

In the context of industrial buildings and power plants, electrical installations and cable trays represent a main fuel load and a potential initial fire source due to possible short circuits or comparable malfunction. Furthermore, a fire can spread from one tray to additional trays mounted above and/or horizontally on one tray. Because of the high significance of cable fires, several research projects have been carried out, investigating the fire behaviour of cables from small‐scale tests, eg, the cone calorimeter, up to large‐scale tests, analysing complete cable tray constructions. The goal of the work presented in this paper is the extension of the knowledge regarding the influence of geometrical parameters like the packing density and tray distance on the burning behaviour and fire spread of cable tray installations. The results are considered, together with test results from the literature, to quantify the main physical parameters describing the burning behaviour. In a next step, the general applicability of these parameters as input data for the parametrization of the source term of numerical simulations is shown. The test results show that the burning behaviour and the fire spreading highly depend on the cable arrangement of the cables on the cable tray, in combination with other boundary conditions. By applying the results as input for a fire simulation, the mass loss rate is considered appropriately.     

Dielectric relaxation of vegetable-based polyurethane

Vegetable-based polyurethane (PU) was prepared in the thin film form by spin coating. This polymer is synthesised from castor oil, which can be extracted from the seeds of a native plant in Brazil called mamona. This polymer is biocompatible and is being used as material for artificial bone. The PU was characterised by dielectric spectroscopy in a wide range of frequency (10^–5 Hz to 10⁵ Hz) and by thermally stimulated discharge current (TSDC) measurements. The glass transition temperature (T _g = 39°C) was determined and using the initial rise method the activation energy was found to be 1.58 eV.     

Investigation of the action of flame retardants in cellulose. I. Investigation of the flame retardant action of 2,2′-oxybis(5,5-dimethyl-1,3,2-dioxaphosphorinane-2,2′-disulfide) in cellulose

Pyrolysis experiments were performed in high vacuum and under reduced air pressure (100 Pa). The volatile products of pure cellulose and cellulose containing various amounts of flame retardant 2,2′-oxybis (5,5-dimethyl-1,3,2-dioxaphosphorinane-2,2′-disulfide), i.e., Sandoflam 5060 of Sandoz AG, were studied by means of gas chromatography in combination with mass spectroscopy. The volatile products were characterized with infrared spectroscopy. The studied revealed that the incorporation of the flame retardant enhanced the water release and shifted the onset of this reaction to lower temperature. On the basis of these findings an explanation for the mechanism of flame retardancy in generated cellulose fibers modified with this particular flame retardant is attempted. From experiments with different residual air pressure the influence of oxygen on the primary processes of the pyrolytic degradation of cellulose is being discussed.     

Clarification of a wheat straw‐derived medium with ion‐exchange resins for xylitol crystallization

BACKGROUND: Xylitol bioproduction from lignocellulosic residues comprises hydrolysis of the hemicellulose, detoxification of the hydrolysate, bioconversion of the xylose, and recovery of xylitol from the fermented hydrolysate. There are relatively few reports on xylitol recovery from fermented media. In the present study, ion‐exchange resins were used to clarify a fermented wheat straw hemicellulosic hydrolysate, which was then vacuum‐concentrated and submitted to cooling in the presence of ethanol for xylitol crystallization. RESULTS: Sequential adsorption into two anion‐exchange resins (A‐860S and A‐500PS) promoted considerable reductions in the content of soluble by‐products (up to 97.5%) and in medium coloration (99.5%). Vacuum concentration led to a dark‐colored viscous solution that inhibited xylitol crystallization. This inhibition could be overcome by mixing the concentrated medium with a commercial xylitol solution. Such a strategy led to xylitol crystals with up to 95.9% purity. The crystallization yield (43.5%) was close to that observed when using commercial xylitol solution (51.4%). CONCLUSION: The experimental data demonstrate the feasibility of using ion‐exchange resins followed by cooling in the presence of ethanol as a strategy to promote the fast recovery and purification of xylitol from hemicellulose‐derived fermentation media. Copyright © 2008 Society of Chemical Industry     

High speed propulsion: Performance advantage of advanced materials

High-speed air breathing propulsion systems have many attractive military and civil applications. The high propulsive efficiency of these systems allows the exploitation of speed, distance, and bigger payloads, or any combination of the three. The severe operating conditions of these systems require particular attention to overall thermal management of the engine/air-frame. Fuel-cooling the engine structure is a viable way of maintaining thermal balance over a range of flight conditions. Air Force applications have focused on using endothermic hydrocarbon fuels to address this issue because of their compatibility with the military operations. Recent ground tests of scramjet engines have demonstrated adequate performance utilizing state-of-the-art technology in materials. This progress has paved the way for an expendable flight test vehicle in the near future. In order to take full advantage of the capabilities of this propulsion system, advances in fuel-cooled structures, high temperature un-cooled materials, and increased heat capacity of hydrocarbon fuels will be needed to enable expendable systems to reach higher Mach numbers. An additional benefit would be realized in future reusable systems.     

,,Rich Internet Applications“ – Eine perfekte Kombination benutzerfreundlicher Schnittstellen mit Webtechnologie

Zusammenfassung  ,,Rich Internet Applications“ (RIA) sind Webapplikationen, die mit einer wesentlich interaktiveren Benutzerschnittstelle ausgestattet sind, als wir das bisher von den auf HTML basierten ,,poor ugly web applications“ (PUWA) gewohnt waren.     

Wave propagation by the passage of two high-speed trains in a tunnel

A numerical simulation of unsteady compressible flow induced by two high-speed trains in oncoming traffic within a tunnel is presented. The computations were carried out by means of a second-order accurate Harten-Yee type upwind TVD scheme. In order to take the effect of friction into account, a source term is included in the governing flow equations. In the computation, moving boundary configurations were used to simulate the two trains passing through the tunnel. As geometrical configuration, the Einmalberg tunnel, where experimental data are available, was selected. The computational results agree reasonably well with their experimental counter-part. The waves interaction and the waves propagation process at the tunnel entrance and exit as well as within the tunnel are addressed. Finally, the influence on the transmitted waves at the tunnel exit portal and the variation of the negative pressure drop during the passage of the two trains are discussed.     

Systemised serendipity for producing computer art

Serendipity applied to Newton's method, and its derivative the Secant Method, produces unusual and beautiful fractal patterns. Serendipity may be systemised, for example, by the introduction of a perturbation parameter P1, [1] to facilitate searches for interesting pattern variations.     

Role of early supervisory experience in supervisor performance.

Explores the role of early supervisory experience and cognitive ability in 1st-line supervisor performance. Similar to the F. L. Schmidt et al (see record 1986-31441-001) study of nonsupervisors, this research tested structural models hypothesizing relationships among supervisory experience, cognitive ability, supervisory knowledge and proficiency, and performance ratings, using a sample of 570 2nd-tour soldiers. The Schmidt et al model with an additional ability?→?experience path provided the best fit. The significant ability?→?experience path was interpreted as indicating that demonstrated ability contributes to soldiers being given the opportunity to obtain supervisory experience. Experience had a greater impact on supervisor proficiency than on supervisor knowledge. Ability had a greater impact on supervisor knowledge than on proficiency. Discussion focuses on the personal characteristics that might be involved in being assigned supervisory responsibilities. (PsycINFO Database Record (c) 2010 APA, all rights reserved)