Bidirectional repeaterless transmission of 8 x 10 GE over 210 km of standard single mode fibre

Experimental results on error-free bidirectional transmission of 8times10 Gigabit Ethernet channels over 210 km of standard single mode fibre are presented here. Inexpensive XENPAKs transceivers, conventional unidirectional 1530-1560 nm (C-band) erbium-doped fibre amplifiers and fibre Bragg grating dispersion compensating modules have been used. The results are very promising, especially for operators of national research and educational networks     

Short-term power sources for tokamaks and other physical experiments

The Compass-D tokamak is being planned to move from UKAEA Culham (England) be and reinstalled in IPP Prague (Czech Republic). An overview of Compass-D energetics is described in short. The new power sources have to be designed. Alternative solutions of power sources have been investigated. Ignitrons and mechanical breakers can be replaced by modern high-power semiconductors. With respect to the need of accumulated energy, new technologies of energy storage - supercapacitors and high-speed flywheels, not applied up to now in similar fusion projects, are characterized in comparison with traditional ones - capacitors and big motor-flywheel generators. It is shown that these technologies enhance possibilities in arrangement of power supplies for tokamaks as well as for other high-power demanding experiments with pulse length from fraction to tens of seconds.     

Model-based design and test of vibration energy harvester for aircraft application

This paper deals with a development process of a vibration energy harvesting device in aircraft applications. The vibration energy harvester uses ambient energy of mechanical vibration and it provides an autonomous source of energy for wireless sensors or autonomous applications. This application presents a complex engineering problem and the vibration energy harvester consists of precise mechanical part, electro-mechanical converter, electronics and a powered application. It can be perceive as a mechatronic system and a mechatronic approach was used for development of our vibration energy harvester. An essential step of development process is simulation modeling which is based on mechatronic approach. Presented model-based design of vibration energy harvester is very useful during development process and the whole development process of the autonomous energy source is presented in this paper. The main aim of the paper is an introduction of our development methodology and our approach is presented on a sample of the vibration energy harvester for aircraft applications under project ESPOSA.     

Apoferritin Modified Magnetic Particles as Doxorubicin Carriers for Anticancer Drug Delivery

Magnetic particle mediated transport in combination with nanomaterial based drug carrier has a great potential for targeted cancer therapy. In this study, doxorubicin encapsulation into the apoferritin and its conjugation with magnetic particles was investigated by capillary electrophoresis with laser-induced fluorescence detection (CE-LIF). The quantification of encapsulated doxorubicin was performed by fluorescence spectroscopy and compared to CE-LIF. Moreover, the significant enhancement of the doxorubicin signal was observed by addition of methanol into the sample solution.     

A Novel Insight into the Cardiotoxicity of Antineoplastic Drug Doxorubicin

Doxorubicin is a commonly used antineoplastic agent in the treatment of many types of cancer. Little is known about the interactions of doxorubicin with cardiac biomolecules. Serious cardiotoxicity including dilated cardiomyopathy often resulting in a fatal congestive heart failure may occur as a consequence of chemotherapy with doxorubicin. The purpose of this study was to determine the effect of exposure to doxorubicin on the changes in major amino acids in tissue of cardiac muscle (proline, taurine, glutamic acid, arginine, aspartic acid, leucine, glycine, valine, alanine, isoleucine, threonine, lysine and serine). An in vitro interaction study was performed as a comparison of amino acid profiles in heart tissue before and after application of doxorubicin. We found that doxorubicin directly influences myocardial amino acid representation even at low concentrations. In addition, we performed an interaction study that resulted in the determination of breaking points for each of analyzed amino acids. Lysine, arginine, β-alanine, valine and serine were determined as the most sensitive amino acids. Additionally we compared amino acid profiles of myocardium before and after exposure to doxorubicin. The amount of amino acids after interaction with doxorubicin was significantly reduced (p = 0.05). This fact points at an ability of doxorubicin to induce changes in quantitative composition of amino acids in myocardium. Moreover, this confirms that the interactions between doxorubicin and amino acids may act as another factor most likely responsible for adverse effects of doxorubicin on myocardium.     

Easy to use and rapid isolation and detection of a viral nucleic acid by using paramagnetic microparticles and carbon nanotubes-based screen-printed electrodes

A method that is easy to use, rapid, with a low cost of detecting viral nucleic acid in a biological sample represents the essential tool in targeted therapy. In this study, we report the use of paramagnetic microparticles covered by streptavidin and modified by an oligonucleotide probe with a specific viral sequence labeled by biotin to detect human immunodeficiency virus (HIV) and influenza virus subtype H5N1. The viral nucleic acids were primarily detected by adsorptive transfer stripping technique coupled with square wave voltammetry using carbon paste, hanging mercury drop or carbon nanotubes-based screen-printed working electrodes. Detection limits were estimated for both sequences down to picograms per 3 μl. To isolate the viral sequences, paramagnetic microparticles covered with biotin-labeled oligonucleotides were used. We calculated the yield of isolation for H5N1 and/or HIV sequences, which was defined as “isolated concentration of viral nucleic acid sequence”/“given viral nucleic acid sequence” × 100. We estimated the yield for both sequences as 59%. Moreover, we studied the influence of human serum, dsDNA and non-complementary sequence of nucleic acids on isolation of viral nucleic acids. We also used carbon nanotubes-based screen-printed electrodes coupled with micro-flow instrument to detect viral nucleic acids. We were able to isolate and detect nanogram amounts of nucleic acids.