An adaptive job scheduling scheme for mesh-connected multicomputers

Allocating submeshes to jobs in mesh-connected multicomputers in an FCFS fashion leads to poor system performance because a large job at the head of the waiting queue can prevent the allocation of free submeshes to other smaller waiting jobs. However, serving jobs aggressively out-of-order can lead to excessive waiting delays for large jobs located at the head of the waiting queue. In this paper, we show that the ability of the job scheduling algorithm to bypass the head of the waiting queue should increase with the load, and we propose a scheduling scheme that can bypass the waiting queue head in a load-dependent adaptive fashion. Also, giving priority to large jobs because they are more difficult to accommodate is investigated. The performance of the proposed scheme has been compared to that of FCFS, aggressive out-of-order scheduling, and other previous job scheduling schemes. Extensive simulation results based on synthetic workloads and real workload traces indicate that our scheduling strategy is a good strategy when both average and maximum job waiting delays are considered. In particular, it is substantially superior to FCFS in terms of mean turnaround times, and to aggressive out-of-order scheduling in terms of maximum waiting delays.     

Modelling and characterization of AlN-actuated microcantilevers vibrating in the first in-plane mode

The characterization of the first in-plane mode of aluminum nitride-actuated piezoelectric microcantilevers was carried out by using electrical and optical techniques. The top electrode of the cantilever was specifically designed to allow for an efficient electrical actuation of these in-plane modes. In order to confirm the in-plane nature of the modal vibration, the detection of the electrically induced movement was performed optically with the help of a stroboscopic microscope. In parallel, resonances were also measured electrically by means of an impedance analyzer. The quality factor and the resonant frequencies of the in-plane modes were estimated from the corresponding measurement data when applying both detection techniques. Our results show quality factor values as high as 3,000 for the first in-plane mode in air.     

Flux measurements for a DD neutron generator using neutron activation analysis

The fast and maximum thermal neutron fluxes from the DD-109 neutron generator at the University of Sharjah were experimentally measured by the activation technique using different neutron reactions. The thermal and fast neutron fluxes were found to be 2.960 × 10~6 and6.186 × 10~7 n/cm~2 s, respectively. This was done to verify the modeling results for the optimum moderator thickness needed to maximize the thermal neutron flux. The optimum moderator thickness was found to be between 3.5 and4 cm. The present data were compared with the detailed MCNP model-based calculation performed in earlier work to simulate the generator.     

Iterative compensation schemes for multimedia content authentication

Multimedia content authentication can be achieved by deriving a fragile content-based signature from a media signal and embedding it robustly back into the signal. The perturbation due to embedding needs to be compensated with mechanisms that lead to producing the original signature. Closed form solutions for compensation are not always feasible. In this paper, we propose two iterative compensation schemes to address such scenarios. The first is based on a set-theoretic approach by using projections onto convex sets (POCS), where signature generation and signal fidelity are modeled as convex constraint sets. The other scheme uses an additive iterative approach used in the cases where the POCS approach is not applicable. Examples of successful image authentication are presented to demonstrate the effectiveness of the proposed schemes over a range of watermark-embedding robustness. A comparison with the closed-form compensation scheme, when feasible, is also presented.     

Effect of sulfide concentration on the location of the metal precipitates in inversed fluidized bed reactors

The effect of the sulfide concentration on the location of the metal precipitates within sulfate-reducing inversed fluidized bed (IFB) reactors was evaluated. Two mesophilic IFB reactors were operated for over 100 days at the same operational conditions, but with different chemical oxygen demand (COD) to SO₄²⁻ ratio (5 and 1, respectively). After a start up phase, 10 mg/L of Cu, Pb, Cd and Zn each were added to the influent. The sulfide concentration in one IFB reactor reached 648 mg/L, while it reached only 59 mg/L in the other one. In the high sulfide IFB reactor, the precipitated metals were mainly located in the bulk liquid (as fines), whereas in the low sulfide IFB reactor the metal preciptiates were mainly present in the biofilm. The latter can be explained by local supersaturation due to sulfide production in the biofilm. This paper demonstrates that the sulfide concentration needs to be controlled in sulfate reducing IFB reactors to steer the location of the metal precipitates for recovery.     

Distribution of natural and anthropogenic radionuclides in heavy rainfall areas in Jordan

Soil is the main reservoir of both natural and artificial radionuclides, which are transported to the human body through the food chain. Thus, assessment of the level of radioactivity in soil is of crucial importance. Artificial radionuclide concentrations in soil depend heavily on rainfall and weather conditions. In this study, the soil of the Ras Muneef area, which has the highest rainfall in Jordan, was investigated for its natural and anthropogenic radioactive content. The area was divided into four sectors and in each sector three locations were investigated depending on the land use: undisturbed, cultivated or residential. The depth profile of (137)Cs was investigated and found to depend on the land use. In the undisturbed soils, two types of depth profiles were identified: Gaussian and exponentially decreasing. The annual effective dose was found to range from 19.4 to 72.6 μSv, which falls within the worldwide ranges.     

Photochemical reduction and reoxidation of aqueous mercuric chloride in the presence of ferrioxalate and air

In this study, ferric oxalate is used to represent the photosensitive Fe(III) complexes as well as the diacid compounds which are at significant concentrations in cloud and rain droplets. Because of the common carboxylate functional group; ferric oxalate is also used as a model to represent humic substances found in natural water. UVA irradiation of aqueous acidic mercuric chloride (pH 1-4) in the presence of an excess of ferrioxalate results in partial reduction of the mercuric ion to elemental mercury. The pseudo-first-order rate constant "kobs" for the photoreduction reaction is pH-dependent as is the yield of residual Hg(II). When exposed to visible irradiation the rate is about 10 times slower and no reaction was observed in the dark. The inferred mechanism of photoreduction involves the reaction of Hg(II) with a secondary photoproduct, the strongly reducing radical anion CO2-*. In the presence of dissolved oxygen, competition for CO2-* between Hg(II) and O2 reduces the rate and efficiency of mercuric ion reduction. The O2-*/HO2 products do not reduce Hg(II). On the contrary, their disproportionation leads to the formation of H2O2 which causes a re-oxidation of Hg(0) at pH values of 相似文献   

Investigation of the effect of superheating on the performance of a refrigeration system using low temperature different refrigerant blends in porous media

A comparative experimental investigation on the effect of superheating of R‐22, R‐404A, R‐407C, and R‐422A as low‐temperature refrigerant blends on the performance of a vapor compression refrigeration system is conducted. Empty and porous evaporators with porosities of (40%, 43%, and 45%) are used during the tests, to predict good alternatives to the refrigerant R‐22, which has high ozone depletion potential and high global warming potential. Condensation, evaporation temperatures, degree of subcool are kept constants at 40°C, ?26°C, and 6°C (±0.5°C), respectively. The effect of superheating on the compressor discharge temperature, evaporating pressure drop, evaporating capacity, volumetric refrigeration capacity and coefficient of performance (COP) of these refrigerants has been analyzed. Refrigerants, R‐422A and R‐404A showed greater performances than that of R‐22. The percentages of increase in evaporation capacities of R‐407c, R‐22, R‐404A, and R‐422A are approximately 144%, 168%, 146.3%, and 161.5%, respectively, when changing the degrees of superheat from 6°C to 16°C and changing the porosity from empty evaporator to 40%. The percentages of increase in COP are approximately 319%, 320%, 312%, and 350%, respectively. The percentages of increase in evaporation capacities of R‐422A and R‐404A when compared with R‐22 under the same conditions are 18.6% and 8.8%, respectively, while the percentages of increase in COP when compared with R‐22 are 17% and 12%, respectively.